2000-2004 Subaru Outback SUV Instruments and controls -> Ignition switch User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Ignition switch for Your Subaru Outback SUV Second Generation (2000-2004)

3
Instruments and controls
3-3
– CONTINUED –
Ignition switch
WARNING
Never turn the ignition switch to “LOCK” while the vehicle is be-
ing driven or towed because that will lock the steering wheel, pre-
venting steering control. And when the engine is turned off, it
takes a much greater effort than usual to steer.
The ignition switch has four positions: LOCK, ACC, ON and START.
HB4000CA
B LOCK
The key can only be inserted or removed in this position. The ignition
switch will lock the steering wheel when you remove the key.
If turning the key is difficult, turn the steering wheel slightly to the right
and left as you turn the key.
3-4
n Automatic transmission vehicles
HB2032CAHB4016BA
The key can be turned from “ACC” to “LOCK” only when the selector
lever is in the “P” position.
n Manual transmission vehicles
OM-H0144
The key can be turned from “ACC” to “LOCK” only when the key is
pushed in while turning it.
B ACC
In this position the electrical accessories (radio, accessory power
socket, etc.) can be used.
B ON
This is the normal operating position after the engine is started.
3
Instruments and controls
3-5
– CONTINUED –
B START
CAUTION
Do not turn the ignition switch to the “START” position while the
engine is running.
The engine is started in this position. The starter cranks the engine to
start it. When the key is released (after the engine has started), the
key automatically returns to the “ON” position.
J Key reminder chime
The reminder chime sounds when the driver’s door opens and the key is
in the “LOCK” or “ACC” positions. The chime stops when the key is re-
moved from the ignition switch.
J Ignition switch light
For easy access to the ignition switch in the dark, the ignition switch light
comes on when driver’s door is opened. The light remains on for 10 se-
conds and goes out after driver’s door is closed or if the key is turned to
the “ON” position.
J Key interlock release (AT vehicles only)
If the key can not be turned to the “LOCK” position even when the selec-
tor lever is in the “P” position:
HB3011BA
3-6
OM-H0146HB3012BA
1. Take out the screwdriver from the tool bag.
2. Remove the cover under the steering column using a phillips
screwdriver.
3. Turn the ignition key while pressing the key interlock release lever.
Take your vehicle to the nearest SUBARU dealer immediately to have
the key interlock system repaired.

Related Topics

Popular Owner Manuals