2020-2025 Subaru Outback SUV Seat, Seatbelt and SRS Airbags -> 1-4. Rear Seats User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Seat, Seatbelt and SRS Airbags -> 1-4. Rear Seats for Your Subaru Outback SUV Sixth Generation (2020-2025)

(43,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
. When using for a long period of time,
we recommend setting the seat ventila-
tion to the MID or LOW position. Use the
HIGH position for only quick cooling at
the start of the function usage.
Adjust the seat ventilation function on the
center information display. Refer to “Front
Seat Ventilation” �P314.
1-4. Rear Seats
s01ac
WARNING
Seatbelts provide maximum re-
straint when the occupant sits back
and upright in the seat. Do not place
cushions or any other materials
between occupants and seatbacks
or seat cushions. By doing so, the
risk of sliding under the lap belt and
of the lap belt sliding up over the
abdomen will increase, and both can
result in serious internal injury or
death.
WARNING
Never stack luggage or other cargo
higher than the top of the seatback
as it could tumble forward and injure
passengers in the event of a sudden
stop or accident.
– CONTINUED –
Rear Seats
41
1
Seat, Seatbelt and SRS Airbags
(44,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
& Reclining the Seatback
(Outback/Subaru Outback
Wilderness)
s01ac06
WARNING
To prevent the passenger from slid-
ing under the seatbelt in the event of
a collision, always put the seatback
in the upright position while the
vehicle is in motion.
CAUTION
If the vehicle is equipped with a
cargo area cover, observe the fol-
lowing precautions.
. Make sure hands are not pinched
between the headrest and the
cargo area cover when rear seat
is reclined.
. Move the front cover of the cargo
area cover backward so that the
cover is not damaged by the
reclined seatback. Refer to “Lift-
ing Cargo Cover (Outback/
Subaru Outback Wilderness – If
Equipped)” �P337.
Adjust the seatback to the desired position
while pulling the lever.
After adjusting the seatback, release the
lever and make sure the seatback is
securely locked into place.
& Folding Down the Rear Seat-
back
s01ac02
WARNING
. When folding down the seatback,
check that there are no passen-
gers or objects on the rear seat.
Not doing so creates a risk of
injury or property damage.
. Never allow passengers to ride
on the folded rear seatback or in
the cargo area or trunk. Doing so
may result in serious injury or
death.
. Secure all objects and especially
long items properly to prevent
them from being thrown around
inside the vehicle and causing
serious injury during a sudden
steering maneuver or accelera-
tion.
. When you return the seatback to
its original position, shake it
slightly to confirm that it is se-
curely in place. If it is not securely
fixed in place, it may suddenly
fold down in the event of sudden
braking, or objects may move out
from the cargo area, both could
cause serious injury or death.
Rear Seats
42
(45,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
1) Striker
WARNING
When the seatback is returned to its
original position, observe the fol-
lowing precautions. Failure to do so
may lead to serious injury or an
accident because the proper seat-
belt operation will be affected.
. The seatbelt should not be
caught in the seatback and it
should be fully visible.
. The seatbelt should not pass
behind the striker for the seat-
back.
CAUTION
For Outback/Subaru Outback
Wilderness, the rear seatback may
fold down quickly due to the internal
spring. Hold the seatback while pull-
ing the release button to slow it
down.
! Folding down the rear seatback
(Legacy)
s01ac0201
Release button
1) Release lever (if equipped)
1. Lower the head restraints.
– CONTINUED –
Rear Seats
43
1
Seat, Seatbelt and SRS Airbags
(46,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
2. Folding the seatback by performing
either of the following procedures.
. Push the release button.
. Pull the release lever.
! Folding down the rear seatback
(Outback/Subaru Outback
Wilderness)
s01ac0202
Release button
Release lever
1. Lower the head restraints.
2. Folding the seatback by performing
either of the following procedures.
. Push the release button.
. Pull the release lever.
! Return the rear seatback
s01ac0204
WARNING
When returning the seatback to its
original position, observe the fol-
lowing precaution.
Failure to do so may damage the
seatbelt, and possibly result in a
serious injury.
. Pull the seatbelt out towards the
vehicle exterior so that it will not
be caught between the seatback
and the trim.
Rear Seats
44
(47,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
Lock release button
1) Unlocked
2) Locked
A) Unlocking marker in red
To return the seatback to its original
position, raise the seatback until it locks
into place and ensure that the unlocking
marker on the lock release button is no
longer visible.
WARNING
When you return the seatback to its
original position, check that the
unlocking marker on the lock re-
lease button is not visible. Also,
shake the seatback slightly to con-
firm that it is securely in place. If the
seatback is not securely in place, the
seatback may suddenly fold down in
the event of sudden braking, or
objects may move out from the
cargo area, which could cause ser-
ious injury or death.
& Head Restraint Adjustment
s01ac03
Both the rear window side seats and the
rear center seat are equipped with head
restraints.
WARNING
. Never drive the vehicle with the
head restraints removed because
they are designed to reduce the
risk of serious neck injury in the
event that the vehicle is struck
from the rear. Therefore, when
you remove the head restraints,
you must reinstall all head re-
straints to protect vehicle occu-
pants.
. All occupants, including the dri-
ver, should not operate a vehicle
or sit in a vehicle’s seat until the
head restraints are placed in their
proper positions in order to mini-
mize the risk of neck injury in the
event of a crash.
. The front seat head restraints are
designed to be installed into the
front seats only. The rear seat
head restraints are designed to
be installed into the rear seats
only. Do not attempt to install the
front seat head restraints into the
rear seats, or the rear seat head
restraints into the front seats.
! Rear window side seating position
s01ac0301
1) Head restraint
2) Release button
To raise:
Pull the head restraint up.
To lower:
Push the head restraint down while press-
ing the release button on the top of the
seatback.
– CONTINUED –
Rear Seats
45
1
Seat, Seatbelt and SRS Airbags
(48,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
To remove:
While pressing the release button, pull out
the head restraint.
To install:
Install the head restraint into the holes that
are located on the top of the seatback until
the head restraint locks.
The head restraint should be adjusted so
that the center of the head restraint is
closest to the top of the occupant’s ears.
When the seats are not occupied, lower
the head restraints to improve rearward
visibility.
NOTE
For Legacy, it is not possible to remove
or install the head restraint without
folding down the rear seatback. Fold
down the rear seatback and then re-
move or install the head restraint.
! Rear center seating position
s01ac0302
1) When not used (retracted position)
2) When used (extended position)
CAUTION
The head restraint is not intended to
be used in the retracted position.
Before sitting on the seat, raise the
head restraint to the extended posi-
tion.
1) Head restraint
2) Release button
To raise:
Pull the head restraint up.
To lower:
Push the head restraint down while press-
ing the release button on the top of the
seatback.
To remove:
While pressing the release button, pull out
the head restraint.
To install:
Install the head restraint into the holes that
are located on the top of the seatback until
the head restraint locks.
When the rear center seating position is
occupied, raise the head restraint to the
Rear Seats
46
(49,1)
北米Model "A2620BE-A" EDITED: 2022/ 4/ 25
extended position. When the rear center
seating position is not occupied, lower the
head restraint to improve rearward visibi-
lity.
& Armrest
s01ac01
To lower the armrest, pull on the armrest’s
top edge.
WARNING
To avoid serious injury and vehicle
damage, passengers must never sit
on the center armrest.
1-5. Seatbelts
s01ae
& Seatbelt Safety Tips
s01ae01
WARNING
. All persons in the vehicle should
fasten their seatbelts BEFORE
the vehicle starts to move. Other-
wise, the possibility of serious
injury becomes greater in the
event of a sudden stop or acci-
dent.
. All belts should fit snugly in order
to provide full restraint. Loose
fitting belts are not as effective in
preventing or reducing injury.
. Each seatbelt is designed to sup-
port only one person. Never use a
single belt for two or more per-
sons – even children. Otherwise,
in an accident, serious injury or
death could result.
. Replace all seatbelt assemblies
including retractors and attach-
ing hardware worn by occupants
of a vehicle that has been in a
serious accident. The entire as-
sembly should be replaced even
if damage is not obvious.
. Seat children in the rear seat
properly restrained at all times.
The SRS airbag deploys with
considerable speed and force
and can injure or even kill chil-
dren, especially if they are not
restrained or improperly re-
strained. Because children are
lighter and weaker than adults,
their risk of being injured from
deployment is greater. For that
reason, we strongly recommend
that ALL children (including
those in child restraint systems)
sit in the REAR seat properly
restrained at all times in a child
restraint system or in a seatbelt,
whichever is appropriate for the
child’s height and weight. Secure
ALL types of child restraint sys-
tems in the REAR seats at all
times.
NEVER INSTALL A CHILD RE-
STRAINT SYSTEM IN THE FRONT
PASSENGER’S SEAT. DOING SO
RISKS SERIOUS INJURY OR
DEATH TO THE CHILD BY PLA-
CING THE CHILD’S HEAD TOO
CLOSE TO THE SRS AIRBAG.
According to accident statistics,
children are safer when properly
restrained in the rear seating
– CONTINUED –
Seatbelts
47
1
Seat, Seatbelt and SRS Airbags

Related Topics

Popular Owner Manuals