2010-2016 Subaru XV SUV Audio -> CD player operation User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Audio -> CD player operation for Your Subaru XV SUV First Generation (2010-2016)

5-16 Audio/CD player operationCD player operation– Maximum number of files on aAAC (type A audio):CD: 510 (type A audio)/999 (type B. Based on MPEG4 AACaudio)NOTE. Sampling rate (kHz): 48, 44.1, 32, 24,22.05, 16, 12, 11.025, 8. Make sure to always insert a disc& Play file. Bit rate (kbps): 8 to 320with the label side up. If a disc isinserted with the label side down, the. Number of channels: 1 to 2chNOTEplayer displays “CHECK DISC”. Refer. Copyright protected MP3/WMA/AACAAC (type B audio):to “When the following messages arefiles will not be played by the system.. Based on MPEG2 AAC and MPEG4displayed” player will automatically skip to theAAC. If a disc is inserted during a radionext file (track).broadcast, the disc will interrupt the. Sampling rate (kHz): 48, 44.1, 32, 24,. WMA9 Lossless, WMA9 Profes-broadcast.22.05, 16, 12, 11.025, 8sional and WMA9 voice cannot be. After the last song finishes, the disc. Bit rate (kbps): 8 to 320played.will automatically return to track 1 (the. Number of channels: 1 to 2chfirst track on the disc) and will auto-MP3:matically play back.& How to insert a CD. Based on MPEG1, 2 and 2.5 Layer3. The player is designed to be able to. Sampling rate (kHz): 48, 44.1, 32, 24,Hold a disc with a finger in the center holeplay music CD-Rs and music CD-RWs,22.05, 16, 12, 11.025, 8while gripping the edge of the disc, thenbut it may not be able to play certaininsert it in to the slot (with the label side. Bit rate (kbps): 8 to 320ones.up) and the player will automatically pull. Mini CDs (i.e., 8 cm/3 inch CDs) are. Supports variable bit ratesthe disc into supported, and if inserted, they willWMA (type A audio):be immediately . Based on Windows Media Audio 9. CDs that can be played back areDO NOT INSERT TWO DISCS INTO THEaccompanied by the following restric-. Sampling rate (kHz): 48, 44.1, 32DISC INSERTION SLOT AT THE SAMEtions.. Bit rate (kbps): 32 to 192TIME.– Maximum number of folders: 255WMA (type B audio):– Maxi
5-16 Audio/CD player operation
CD player operation
– Maximum number of files on a
AAC (type A audio):
CD: 510 (type A audio)/999 (type B
. Based on MPEG4 AAC
audio)
NOTE
. Sampling rate (kHz): 48, 44.1, 32, 24,
22.05, 16, 12, 11.025, 8
. Make sure to always insert a disc
& Play file
. Bit rate (kbps): 8 to 320
with the label side up. If a disc is
inserted with the label side down, the
. Number of channels: 1 to 2ch
NOTE
player displays “CHECK DISC”. Refer
. Copyright protected MP3/WMA/AAC
AAC (type B audio):
to “When the following messages are
files will not be played by the system.
. Based on MPEG2 AAC and MPEG4
displayed” F5-20.
The player will automatically skip to the
AAC
. If a disc is inserted during a radio
next file (track).
broadcast, the disc will interrupt the
. Sampling rate (kHz): 48, 44.1, 32, 24,
. WMA9 Lossless, WMA9 Profes-
broadcast.
22.05, 16, 12, 11.025, 8
sional and WMA9 voice cannot be
. After the last song finishes, the disc
. Bit rate (kbps): 8 to 320
played.
will automatically return to track 1 (the
. Number of channels: 1 to 2ch
first track on the disc) and will auto-
MP3:
matically play back.
& How to insert a CD
. Based on MPEG1, 2 and 2.5 Layer3
. The player is designed to be able to
. Sampling rate (kHz): 48, 44.1, 32, 24,
Hold a disc with a finger in the center hole
play music CD-Rs and music CD-RWs,
22.05, 16, 12, 11.025, 8
while gripping the edge of the disc, then
but it may not be able to play certain
insert it in to the slot (with the label side
. Bit rate (kbps): 8 to 320
ones.
up) and the player will automatically pull
. Mini CDs (i.e., 8 cm/3 inch CDs) are
. Supports variable bit rates
the disc into position.
not supported, and if inserted, they will
WMA (type A audio):
be immediately ejected.
NOTE
. Based on Windows Media Audio 9
. CDs that can be played back are
DO NOT INSERT TWO DISCS INTO THE
accompanied by the following restric-
. Sampling rate (kHz): 48, 44.1, 32
DISC INSERTION SLOT AT THE SAME
tions.
. Bit rate (kbps): 32 to 192
TIME.
– Maximum number of folders: 255
WMA (type B audio):
– Maximum number of files in a
. Based on Windows Media Audio 7, 8
folder: 255
and 9
. Sampling rate (kHz): 48, 44.1, 32
. Bit rate (kbps): 32 to 192
5-17Audio/CD player operation& How to play back a CD& To select a track from the& Fast-forwarding and rewind-beginninging! When there is no CD insertedType A audio:Properly insert a CD. Refer to “How toinsert a CD” F5-16.“TUNE/TRACK/CH”When a CD is loaded, the player will startdialFast-forwardplayback of the CD, beginning with thefirst the “TUNE/TRACK/CH” dial clock-! When CD is in the playerwise to skip to the beginning of the nextEach brief press of thebutton willtrack. Each time the dial is turned, theRewindchange the modes in the following se-indicated track number will the “TUNE/TRACK/CH” dial counter-clockwise to skip to the beginning of thecurrent track. Each time the dial is turned,Type B audio:the indicated track number will *: For type A audio, “BT-A” is -forwardWith an MP3, WMA or AAC:When the CD mode is selected, the player. Skipping past the last track will takewill start back to the first track in the folder.. Skipping past the first track will takeyou to the last track in the and hold the “ ” button to fast-forward the track. Release the button tostop and hold the “ ” button to rewindthe track. Release the button to . If you fast-forward to the end of thelast track, fast-forwarding will stop and– CONTINUED –
5-17
Audio/CD player operation
& How to play back a CD
& To select a track from the
& Fast-forwarding and rewind-
beginning
ing
! When there is no CD inserted
Type A audio:
Properly insert a CD. Refer to “How to
insert a CD” F5-16.
“TUNE/TRACK/CH”
When a CD is loaded, the player will start
dial
Fast-forward
playback of the CD, beginning with the
first track.
Turn the “TUNE/TRACK/CH” dial clock-
! When CD is in the player
wise to skip to the beginning of the next
Each brief press of the
button will
track. Each time the dial is turned, the
Rewind
change the modes in the following se-
indicated track number will increase.
quence.
Turn the “TUNE/TRACK/CH” dial counter-
clockwise to skip to the beginning of the
current track. Each time the dial is turned,
Type B audio:
the indicated track number will decrease.
NOTE
*: For type A audio, “BT-A” is displayed.
Fast-forward
With an MP3, WMA or AAC:
When the CD mode is selected, the player
. Skipping past the last track will take
will start playback.
Rewind
you back to the first track in the folder.
. Skipping past the first track will take
you to the last track in the folder.
Press and hold the “ ” button to fast-
forward the track. Release the button to
stop fast-forwarding.
Press and hold the “ ” button to rewind
the track. Release the button to stop
rewinding.
NOTE
. If you fast-forward to the end of the
last track, fast-forwarding will stop and
– CONTINUED –
5-18 Audio/CD player operationNOTEthe player will start playback beginningType A audio:with the first track. For an MP3, WMA orThe repeat-play mode will be cancelledAAC folder, the player will start play-if you perform any of the followingback beginning with the first track next folder.. Press thebutton.. If you rewind to the beginning of the. Press the “SCAN” button (type AType B audio:first track, rewinding will stop and theaudio).player will start playback. For an MP3,WMA or AAC folder, the player will start& Random playbackplayback beginning with the first trackof the current playback tracks at random, press thefollowing button (“RDM” button) while aNOTEtrack is playing.& Repeating. The “RPT” (type A audio)/“OneTo repeat a track, briefly press the follow-RPT” (type B audio) indication refersType A audio* 1ing button (“RPT” button) while the track isto the repeat playback of a single repeats the track that is playing.. The “F-RPT” (type A audio)/“FolderType B audio* 2RPT” (type B audio) indication refers toType A audiothe repeat playback of a folder. Itrepeats the all of the tracks in the*1: Press and hold the button.*2: Press the button . It is possible to select theType B audiofunction when the MP3/WMA/AAC for-Each time you press the button, the modemat track is change in the following time you briefly press the button, theTo cancel the track repeat-play mode,mode will change in the following se-Type A audio:briefly press the “RPT” button and . The “RPT” indication will turnoff, and the normal playback mode will beresumed.
5-18 Audio/CD player operation
NOTE
the player will start playback beginning
Type A audio:
with the first track. For an MP3, WMA or
The repeat-play mode will be cancelled
AAC folder, the player will start play-
if you perform any of the following
back beginning with the first track of
steps.
the next folder.
. Press the
button.
. If you rewind to the beginning of the
. Press the “SCAN” button (type A
Type B audio:
first track, rewinding will stop and the
audio).
player will start playback. For an MP3,
WMA or AAC folder, the player will start
& Random playback
playback beginning with the first track
of the current folder.
To playback tracks at random, press the
following button (“RDM” button) while a
NOTE
track is playing.
& Repeating
. The “RPT” (type A audio)/“One
To repeat a track, briefly press the follow-
RPT” (type B audio) indication refers
Type A audio* 1
ing button (“RPT” button) while the track is
to the repeat playback of a single track.
playing.
It repeats the track that is playing.
. The “F-RPT” (type A audio)/“Folder
Type B audio* 2
RPT” (type B audio) indication refers to
Type A audio
the repeat playback of a folder. It
repeats the all of the tracks in the
*1: Press and hold the button.
*2: Press the button briefly.
folder. It is possible to select the
Type B audio
function when the MP3/WMA/AAC for-
Each time you press the button, the mode
mat track is playing.
will change in the following sequences.
Each time you briefly press the button, the
To cancel the track repeat-play mode,
mode will change in the following se-
Type A audio:
briefly press the “RPT” button and select
quences.
CANCEL. The “RPT” indication will turn
off, and the normal playback mode will be
resumed.
5-19Audio/CD player operationNOTEType B audio:equipment.. Turn the ignition switch to theRandom playback will be cancelled if“LOCK” (off) perform any of the following steps.. Press thebutton.. Press the “SCAN” button (type A& Display selection (type Aaudio).audio)NOTE. The “RDM” (type A audio)/“Track& Scan (type A audio)RDM” (type B audio) indication refers“TEXT” buttonto the random playback of the tracks. Itrandomly repeats the tracks on the CD.“SCAN” buttonIf you press the “TEXT” button duringIt is possible to select the functionplayback, the display will change aswhen formats other than the MP3/WMA/shown in the following scan mode lets you listen to the firstAAC format CD is playing.10 seconds of each track in succession.. The “F-RDM” (type A audio)/“FolderFor CD-DA:Press the “SCAN” button to start scanningRDM” (type B audio) indication refersupward beginning with the track followingto the random playback in the folder. Itthe currently selected repeats the tracks in thefolder. It is possible to select theAfter all tracks on the disk/folder havefunction when an MP3/WMA/AAC for-been scanned, normal playback will bemat track is . To cancel the scan mode, pressFor MP3/WMA/AAC:. The “D-RDM” indication refers to thethe “SCAN” button playback of a disc. It randomlyNOTErepeats the tracks on the CD. It isThe scan mode will be cancelled if youpossible to select the function whenperform any of the following MP3/WMA format track is playing.! Page (track/folder title) scroll. Press the “RPT” cancel the random playback mode,If you press the “TEXT” button again and. Turn the “TUNE/TRACK/CH” the “RDM” button again and selecthold it, the title will be scrolled so you can. Press the “ ” or “ ” side of all of it.“FOLDER/PTY/CAT” “RDM” indication will turn off, and the. Press playback mode will be resumed.. Turn off the power of the audio– CONTIN
5-19
Audio/CD player operation
NOTE
Type B audio:
equipment.
. Turn the ignition switch to the
Random playback will be cancelled if
“LOCK” (off) position.
you perform any of the following steps.
. Press the
button.
. Press the “SCAN” button (type A
& Display selection (type A
audio).
audio)
NOTE
. The “RDM” (type A audio)/“Track
& Scan (type A audio)
RDM” (type B audio) indication refers
“TEXT” button
to the random playback of the tracks. It
randomly repeats the tracks on the CD.
“SCAN” button
If you press the “TEXT” button during
It is possible to select the function
playback, the display will change as
when formats other than the MP3/WMA/
shown in the following sequence.
The scan mode lets you listen to the first
AAC format CD is playing.
10 seconds of each track in succession.
. The “F-RDM” (type A audio)/“Folder
For CD-DA:
Press the “SCAN” button to start scanning
RDM” (type B audio) indication refers
upward beginning with the track following
to the random playback in the folder. It
the currently selected one.
randomly repeats the tracks in the
folder. It is possible to select the
After all tracks on the disk/folder have
function when an MP3/WMA/AAC for-
been scanned, normal playback will be
mat track is playing.
resumed. To cancel the scan mode, press
For MP3/WMA/AAC:
. The “D-RDM” indication refers to the
the “SCAN” button again.
random playback of a disc. It randomly
NOTE
repeats the tracks on the CD. It is
The scan mode will be cancelled if you
possible to select the function when
perform any of the following steps.
an MP3/WMA format track is playing.
! Page (track/folder title) scroll
. Press the “RPT” button.
To cancel the random playback mode,
If you press the “TEXT” button again and
. Turn the “TUNE/TRACK/CH” dial.
press the “RDM” button again and select
hold it, the title will be scrolled so you can
. Press the “ ” or “ ” side of the
CANCEL.
see all of it.
“FOLDER/PTY/CAT” button.
The “RDM” indication will turn off, and the
. Press the
button.
normal playback mode will be resumed.
. Turn off the power of the audio
– CONTINUED –
5-20 Audio/CD player operationNOTEType A audio:& When the following mes-. For type A audio, the display issages are displayedTo select the nextdesigned to show titles as shown inIf one of the following messages isfolderthe following while operating the CD player,To go back to the– When playing a CD-DA: 256 char-determine the cause based on the follow-previous folderactersing information. If you cannot clear those– When playing an MP3/WMA/AAC:messages, please contact your SUBARU64 B audio:– When playing an iPod ® : 255! When “PUSH EJECT” is displayedcharactersTo select the nextPress thebutton to eject the disc.. If no operations are performed for 10folderCheck the disc for damage or deforma-seconds, the screen that was displayedtion, and also check that the correct disc isbefore pressing and holding theTo go back to theinserted. Do not try to eject the disc“TEXT” button will be folderforcibly. Mini CDs (i.e., 8 cm/3 inch CDs)are not supported, and if inserted, they will& Folder selection& How to eject a CD from thebe immediately ejected and this messageplayerNOTEwill be displayed. If the disc cannot beejected or this message remains dis-. Selecting folders in this way isWhen a disc is being played back or whenplayed, please contact your SUBARUpossible only within a single disc.a disc is in the player, press thedealer.. Only MP3/WMA/AAC folders are re-button. The disc will be when an attempt to select the! When “CHECK DISC” is displayedNOTEnext or previous folder is made. If noPress thebutton to eject the folder exists on the disc,. Avoid driving the vehicle with a CDCheck that the disc is not damaged orpressing the “ ” or “ ” side of thesticking out. The CD may fall out due toscratched, and also check that the disc is“FOLDER/PTY/CAT” button starts correctly. This message mayback beginning with the first track.. If you do not remove the ejectedappear when usi
5-20 Audio/CD player operation
NOTE
Type A audio:
& When the following mes-
. For type A audio, the display is
sages are displayed
To select the next
designed to show titles as shown in
If one of the following messages is
folder
the following items.
displayed while operating the CD player,
To go back to the
– When playing a CD-DA: 256 char-
determine the cause based on the follow-
previous folder
acters
ing information. If you cannot clear those
– When playing an MP3/WMA/AAC:
messages, please contact your SUBARU
64 characters
dealer.
Type B audio:
– When playing an iPod ® : 255
! When “PUSH EJECT” is displayed
characters
To select the next
Press the
button to eject the disc.
. If no operations are performed for 10
folder
Check the disc for damage or deforma-
seconds, the screen that was displayed
tion, and also check that the correct disc is
before pressing and holding the
To go back to the
inserted. Do not try to eject the disc
“TEXT” button will be shown.
previous folder
forcibly. Mini CDs (i.e., 8 cm/3 inch CDs)
are not supported, and if inserted, they will
& Folder selection
& How to eject a CD from the
be immediately ejected and this message
player
NOTE
will be displayed. If the disc cannot be
ejected or this message remains dis-
. Selecting folders in this way is
When a disc is being played back or when
played, please contact your SUBARU
possible only within a single disc.
a disc is in the player, press the
dealer.
. Only MP3/WMA/AAC folders are re-
button. The disc will be ejected.
cognized when an attempt to select the
! When “CHECK DISC” is displayed
NOTE
next or previous folder is made. If no
Press the
button to eject the disc.
appropriate folder exists on the disc,
. Avoid driving the vehicle with a CD
Check that the disc is not damaged or
pressing the “ ” or “ ” side of the
sticking out. The CD may fall out due to
scratched, and also check that the disc is
“FOLDER/PTY/CAT” button starts play-
vibration.
inserted correctly. This message may
back beginning with the first track.
. If you do not remove the ejected
appear when using some CD-RW discs.
disc within approximately 15 seconds,
Press the following buttons briefly.
Check that the disc type (i.e., 8 cm/3 inch
a disc protection function will operate,
CDs are not supported) and data format
automatically reloading the disc. In this
are correct. This player can only play
case, the disc is not played.
MP3, WMA and AAC data formats. If the
disc cannot be ejected or this message
5-21Audio/Auxiliary input jackremains displayed, please contact yourAuxiliary input jack2. Press the “CD/AUX” button on theSUBARU control panel to select the AUXmode. Refer to “When CD is in the player”F5-17.3. Play back the portable audio to the instruction manual for theportable audio . The output sound of the portableaudio player is not loud, and the soundvia the vehicle’s speakers that areconnected to the vehicle audio setmay be very low. If you turn up thevolume of the audio set, the volumeYou can connect an external audio devicebecomes louder. However, when youto the vehicle’s audio system and playchange from one portable audio playerback audio via the vehicle’s another one, the volume levels viathe vehicle’s speakers may be signifi-An auxiliary (AUX) input jack is present incantly louder compared to the priorthe center console. A stereo mini pin plugdevice. To avoid a large volume differ-(3.5ø) can be inserted in this jack. Theence, turn down the volume when youconnection cable is available at electricalchange between portable audioappliance or similar .. In some cases, when the soundTo use the AUX input jack:volume of the portable audio player is1. Connect a portable audio player to thelow, the sound quality may becomeAUX input when you turn up the volumeof the vehicle audio system. In this“CD/AUX” buttoncase, adjust the sound volume of theportable audio player.. In some cases, noise occurs be-– CONTINUED –
5-21
Audio/Auxiliary input jack
remains displayed, please contact your
Auxiliary input jack
2. Press the “CD/AUX” button on the
SUBARU dealer.
audio control panel to select the AUX
mode. Refer to “When CD is in the player”
F5-17.
3. Play back the portable audio player.
Refer to the instruction manual for the
portable audio player.
NOTE
. The output sound of the portable
audio player is not loud, and the sound
via the vehicle’s speakers that are
connected to the vehicle audio set
may be very low. If you turn up the
volume of the audio set, the volume
You can connect an external audio device
becomes louder. However, when you
to the vehicle’s audio system and play
change from one portable audio player
back audio via the vehicle’s speakers.
to another one, the volume levels via
the vehicle’s speakers may be signifi-
An auxiliary (AUX) input jack is present in
cantly louder compared to the prior
the center console. A stereo mini pin plug
device. To avoid a large volume differ-
(3.5ø) can be inserted in this jack. The
ence, turn down the volume when you
connection cable is available at electrical
change between portable audio
appliance or similar stores.
players.
. In some cases, when the sound
To use the AUX input jack:
volume of the portable audio player is
1. Connect a portable audio player to the
low, the sound quality may become
AUX input jack.
impaired when you turn up the volume
of the vehicle audio system. In this
“CD/AUX” button
case, adjust the sound volume of the
portable audio player.
. In some cases, noise occurs be-
– CONTINUED –

Related Topics

Popular Owner Manuals