2010-2016 Subaru XV SUV Audio -> Tips for the Hands-free system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Audio -> Tips for the Hands-free system for Your Subaru XV SUV First Generation (2010-2016)

5-53Audio/Hands–free system! Setting LANGUAGE” menu.2. Select the preferred language by1. Select the “SET PASSKEY” menu.! System setupoperating the “TUNE/TRACK/CH” dial.– After the currently set passkey isAfter selecting the “SYSTEM SETUP”displayed, a new passkey can be& Tips for the Hands-free sys-menu, perform the following the following menus by operatingtem2. Input the new passkey by performingthe “TUNE/TRACK/CH” of the following procedures.! Bluetooth ®– Operate the “TUNE/TRACK/CH”! Setting guidance volumeIt is possible to connect a cell phone to set the guidance volume, perform thein-vehicle equipment through the Blue-– Press the talk switchand sayfollowing ® format (wireless) to make a phonethe from the in-vehicle equipment or take1. Select the “GUIDANCE VOL”/“GUI-3. Select the “CONFIRM” incoming phone VOLUME” menu.– The new passkey will be displayed,Since the Bluetooth ® format is wireless, a2. Set the guidance volume by operatingthe passkey will be changed and theconnection between the in-vehicle equip-the “TUNE/TRACK/CH” will change to the “PHONEment and the cell phone can be madeSETUP” placing them in close proximity of! Initializing the registered dataeach other. The cell phone can be used! Deleting registered cell phoneTo initialize the registered data, performwith it left in the breast pocket or the listthe following 1. Select the “DELETE” menu.1. Select the “INITIALIZE” menu.. The Hands-free system may not2. Select a cell phone to be deleted by2. Select the “CONFIRM” properly under the followingperforming either of the following proce-– First “PLEASE WAIT”, then “” will be displayed. The regis-– The cell phone is turned off.– Operate the “TUNE/TRACK/CH”tered data will be initialized and the– The cell phone is not in will change to the last
5-53
Audio/Hands–free system
! Setting passkey
mode.
LECT LANGUAGE” menu.
2. Select the preferred language by
1. Select the “SET PASSKEY” menu.
! System setup
operating the “TUNE/TRACK/CH” dial.
– After the currently set passkey is
After selecting the “SYSTEM SETUP”
displayed, a new passkey can be
& Tips for the Hands-free sys-
menu, perform the following procedures.
entered.
Select the following menus by operating
tem
2. Input the new passkey by performing
the “TUNE/TRACK/CH” dial.
either of the following procedures.
! Bluetooth ®
– Operate the “TUNE/TRACK/CH”
! Setting guidance volume
It is possible to connect a cell phone to the
dial.
To set the guidance volume, perform the
in-vehicle equipment through the Blue-
– Press the talk switch
and say
following procedure.
tooth ® format (wireless) to make a phone
the passkey.
call from the in-vehicle equipment or take
1. Select the “GUIDANCE VOL”/“GUI-
3. Select the “CONFIRM” menu.
an incoming phone call.
DANCE VOLUME” menu.
– The new passkey will be displayed,
Since the Bluetooth ® format is wireless, a
2. Set the guidance volume by operating
the passkey will be changed and the
connection between the in-vehicle equip-
the “TUNE/TRACK/CH” dial.
mode will change to the “PHONE
ment and the cell phone can be made
SETUP” mode.
without placing them in close proximity of
! Initializing the registered data
each other. The cell phone can be used
! Deleting registered cell phone
To initialize the registered data, perform
with it left in the breast pocket or bag.
from the list
the following procedure.
NOTE
1. Select the “DELETE” menu.
1. Select the “INITIALIZE” menu.
. The Hands-free system may not
2. Select a cell phone to be deleted by
2. Select the “CONFIRM” menu.
operate properly under the following
performing either of the following proce-
– First “PLEASE WAIT”, then “INITI-
conditions.
dures.
ALIZED” will be displayed. The regis-
– The cell phone is turned off.
– Operate the “TUNE/TRACK/CH”
tered data will be initialized and the
– The cell phone is not in the
dial.
mode will change to the last mode.
phone call area.
– Press the talk switch
and say
– The battery of the cell phone has
the voice tag.
! Selecting language
run down.
3. Select the “CONFIRM” menu.
To select the language, perform the
– The cell phone is not connected
– “DELETED” will be displayed, the
following procedure.
to the Hands-free system.
data will be deleted and the mode will
1. Select the “SEL LANGUAGE”/“SE-
– The cell phone is behind the seat
change to the “PHONE SETUP”
– CONTINUED –
5-54 Audio/Hands–free systemor in the glove and vice versa. This is normal.! Corresponding profiles for the cell. The receiver sound volume should– A metal material covers orphonebe set as low as possible. Otherwise,touches the cell phone.. HFP (Hands Free Profile): Ver. 1.0the party you are calling may notice an. Depending on the type of cell phone. OPP (Object Push Profile): Ver. 1.1undesirable echo is used, the screen on the cell. Speak clearly and may remain illuminated while& Certification for the Hands-. Your voice may be difficult to bethe ignition switch is in the “ON”free systemheard by the party under the followingposition. If this occurs, turn the off by adjusting the cell phoneCAUTION– Driving on a rough roadsettings.. Depending on the setting of the cell– Driving at a high speedFCC WARNINGphone, the dial lock function may be– Driving with a window openChanges or modifications not ex-activated after making a call. Deacti-– When air from the ventilatorpressly approved by the party re-vate the automatic dial lock function ofblows directly towards the micro-sponsible for compliance could voidthe cell phone before using the Hands-phonethe user’s authority to operate thefree system.– When the sound coming from theequipment.. Depending on the type of cell phoneventilator is loudthat is used, operation and the sound– When the cell phone is too closevolume may be different from those ofto the microphoneNOTEcell phones currently used.. The sound quality may degrade dueThis device complies with Part 15 of. When the ignition switch is turned toto the influence of the cell phone that isthe FCC Rules and RSS-Gen of ICthe “LOCK” (off) position during a call,connected to the system or the circum-Rules. Operation is subject to thethe call may be disconnected or con-stances of the Bluetooth two conditions: (1) this de-tinued on the cell phone depending on. When another Bluetooth ® device isvice
5-54 Audio/Hands–free system
or in the glove box.
voice and vice versa. This is normal.
! Corresponding profiles for the cell
. The receiver sound volume should
– A metal material covers or
phone
be set as low as possible. Otherwise,
touches the cell phone.
. HFP (Hands Free Profile): Ver. 1.0
the party you are calling may notice an
. Depending on the type of cell phone
. OPP (Object Push Profile): Ver. 1.1
undesirable echo sound.
that is used, the screen on the cell
. Speak clearly and loudly.
phone may remain illuminated while
& Certification for the Hands-
. Your voice may be difficult to be
the ignition switch is in the “ON”
free system
heard by the party under the following
position. If this occurs, turn the illumi-
conditions.
nation off by adjusting the cell phone
CAUTION
– Driving on a rough road
settings.
. Depending on the setting of the cell
– Driving at a high speed
FCC WARNING
phone, the dial lock function may be
– Driving with a window open
Changes or modifications not ex-
activated after making a call. Deacti-
– When air from the ventilator
pressly approved by the party re-
vate the automatic dial lock function of
blows directly towards the micro-
sponsible for compliance could void
the cell phone before using the Hands-
phone
the user’s authority to operate the
free system.
– When the sound coming from the
equipment.
. Depending on the type of cell phone
ventilator is loud
that is used, operation and the sound
– When the cell phone is too close
volume may be different from those of
to the microphone
NOTE
cell phones currently used.
. The sound quality may degrade due
This device complies with Part 15 of
. When the ignition switch is turned to
to the influence of the cell phone that is
the FCC Rules and RSS-Gen of IC
the “LOCK” (off) position during a call,
connected to the system or the circum-
Rules. Operation is subject to the
the call may be disconnected or con-
stances of the Bluetooth network.
following two conditions: (1) this de-
tinued on the cell phone depending on
. When another Bluetooth ® device is
vice may not cause harmful interfer-
the type of cell phone that is used. Note
simultaneously connected, noise may
ence, and (2) this device must accept
that operation of the cell phone may be
be heard in the voice coming from the
any interference received, including
necessary if the call is continued on the
hands-free phone.
interference that may cause undesired
cell phone.
operation.
. Do not speak at the same time as the
other party during a call. If you and the
party speak at the same time, it may be
difficult for the other party to hear your

Related Topics

Popular Owner Manuals