2010-2016 Subaru XV SUV Audio -> Certification for the Hands-free system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Audio -> Certification for the Hands-free system for Your Subaru XV SUV First Generation (2010-2016)

5-54 Audio/Hands–free systemor in the glove and vice versa. This is normal.! Corresponding profiles for the cell. The receiver sound volume should– A metal material covers orphonebe set as low as possible. Otherwise,touches the cell phone.. HFP (Hands Free Profile): Ver. 1.0the party you are calling may notice an. Depending on the type of cell phone. OPP (Object Push Profile): Ver. 1.1undesirable echo is used, the screen on the cell. Speak clearly and may remain illuminated while& Certification for the Hands-. Your voice may be difficult to bethe ignition switch is in the “ON”free systemheard by the party under the followingposition. If this occurs, turn the off by adjusting the cell phoneCAUTION– Driving on a rough roadsettings.. Depending on the setting of the cell– Driving at a high speedFCC WARNINGphone, the dial lock function may be– Driving with a window openChanges or modifications not ex-activated after making a call. Deacti-– When air from the ventilatorpressly approved by the party re-vate the automatic dial lock function ofblows directly towards the micro-sponsible for compliance could voidthe cell phone before using the Hands-phonethe user’s authority to operate thefree system.– When the sound coming from theequipment.. Depending on the type of cell phoneventilator is loudthat is used, operation and the sound– When the cell phone is too closevolume may be different from those ofto the microphoneNOTEcell phones currently used.. The sound quality may degrade dueThis device complies with Part 15 of. When the ignition switch is turned toto the influence of the cell phone that isthe FCC Rules and RSS-Gen of ICthe “LOCK” (off) position during a call,connected to the system or the circum-Rules. Operation is subject to thethe call may be disconnected or con-stances of the Bluetooth two conditions: (1) this de-tinued on the cell phone depending on. When another Bluetooth ® device isvice
5-54 Audio/Hands–free system
or in the glove box.
voice and vice versa. This is normal.
! Corresponding profiles for the cell
. The receiver sound volume should
– A metal material covers or
phone
be set as low as possible. Otherwise,
touches the cell phone.
. HFP (Hands Free Profile): Ver. 1.0
the party you are calling may notice an
. Depending on the type of cell phone
. OPP (Object Push Profile): Ver. 1.1
undesirable echo sound.
that is used, the screen on the cell
. Speak clearly and loudly.
phone may remain illuminated while
& Certification for the Hands-
. Your voice may be difficult to be
the ignition switch is in the “ON”
free system
heard by the party under the following
position. If this occurs, turn the illumi-
conditions.
nation off by adjusting the cell phone
CAUTION
– Driving on a rough road
settings.
. Depending on the setting of the cell
– Driving at a high speed
FCC WARNING
phone, the dial lock function may be
– Driving with a window open
Changes or modifications not ex-
activated after making a call. Deacti-
– When air from the ventilator
pressly approved by the party re-
vate the automatic dial lock function of
blows directly towards the micro-
sponsible for compliance could void
the cell phone before using the Hands-
phone
the user’s authority to operate the
free system.
– When the sound coming from the
equipment.
. Depending on the type of cell phone
ventilator is loud
that is used, operation and the sound
– When the cell phone is too close
volume may be different from those of
to the microphone
NOTE
cell phones currently used.
. The sound quality may degrade due
This device complies with Part 15 of
. When the ignition switch is turned to
to the influence of the cell phone that is
the FCC Rules and RSS-Gen of IC
the “LOCK” (off) position during a call,
connected to the system or the circum-
Rules. Operation is subject to the
the call may be disconnected or con-
stances of the Bluetooth network.
following two conditions: (1) this de-
tinued on the cell phone depending on
. When another Bluetooth ® device is
vice may not cause harmful interfer-
the type of cell phone that is used. Note
simultaneously connected, noise may
ence, and (2) this device must accept
that operation of the cell phone may be
be heard in the voice coming from the
any interference received, including
necessary if the call is continued on the
hands-free phone.
interference that may cause undesired
cell phone.
operation.
. Do not speak at the same time as the
other party during a call. If you and the
party speak at the same time, it may be
difficult for the other party to hear your
5-55Audio/Hands–free systemNOTEsible for compliance could void the! Mexico modelsuser’s authority to operate the equip-This equipment has been tested to comply with the limits for a. This equipment complies with FCC/Class B digital device, pursuant to PartIC radiation exposure limits set forth15 of the FCC Rules. These limits arefor an uncontrolled environment anddesigned to provide reasonable protec-meets the FCC radio frequency (RF)tion against harmful interference in aExposure Guidelines in Supplement Cresidential installation. This equipmentto OET65 and RSS-102 of the IC radiomay cause harmful interference tofrequency (RF) Exposure rules. Thisradio communications, if it is notequipment has very low levels of RFinstalled and used in accordance withenergy that it deemed to comply with-the instructions. However, there is noout maximum permissive exposureguarantee that interference will notevaluation (MPE). But it is desirableoccur in a particular installation. If thisthat it should be installed and operatedequipment does cause harmful inter-keeping the radiator at least 20 cm orference to radio or television reception,more away from person’s body (ex-which can be determined by turning thecluding extremities: hands, wrists, feetequipment off and on, the user isand ankles).encouraged to try to correct the inter-. This transmitter must not be co-ference by one or more of the followinglocated or operated in conjunction other antenna or transmitter.. Reorient or relocate the receivingantenna.. Increase the separation between theequipment and receiver.. Connect the equipment into an out-let on a circuit different from that towhich the receiver is connected.. Consult the dealer or an experi-enced radio/TV technician for help.. Changes or modifications not ex-pressly approved by the party respon-– CONTINUED –
5-55
Audio/Hands–free system
NOTE
sible for compliance could void the
! Mexico models
user’s authority to operate the equip-
This equipment has been tested and
ment.
found to comply with the limits for a
. This equipment complies with FCC/
Class B digital device, pursuant to Part
IC radiation exposure limits set forth
15 of the FCC Rules. These limits are
for an uncontrolled environment and
designed to provide reasonable protec-
meets the FCC radio frequency (RF)
tion against harmful interference in a
Exposure Guidelines in Supplement C
residential installation. This equipment
to OET65 and RSS-102 of the IC radio
may cause harmful interference to
frequency (RF) Exposure rules. This
radio communications, if it is not
equipment has very low levels of RF
installed and used in accordance with
energy that it deemed to comply with-
the instructions. However, there is no
out maximum permissive exposure
guarantee that interference will not
evaluation (MPE). But it is desirable
occur in a particular installation. If this
that it should be installed and operated
equipment does cause harmful inter-
keeping the radiator at least 20 cm or
ference to radio or television reception,
more away from person’s body (ex-
which can be determined by turning the
cluding extremities: hands, wrists, feet
equipment off and on, the user is
and ankles).
encouraged to try to correct the inter-
. This transmitter must not be co-
ference by one or more of the following
located or operated in conjunction with
measures.
any other antenna or transmitter.
. Reorient or relocate the receiving
antenna.
. Increase the separation between the
equipment and receiver.
. Connect the equipment into an out-
let on a circuit different from that to
which the receiver is connected.
. Consult the dealer or an experi-
enced radio/TV technician for help.
. Changes or modifications not ex-
pressly approved by the party respon-
– CONTINUED –
5-56 Audio/Screensaver (type B audio)Screensaver (type B audio). Connect a USB storage device or an! Paraguay modelsiPod ®. Vendor: Tokyo Motors S.A.. Vendor address: Avda. Eusebio AyalaIf the following operations are not per-NOTE4649 kg 5 1/2 Asuncion, Paraguayformed for more than 30 seconds whileThe screensaver is not displayed underthe audio is ON, the screensaver will bethe following .. While the ignition switch is in the. Operate any button or dial“LOCK” (off) position. Shift the shift lever/select lever to the. While the audio is OFF“R” position. While the screen is OFF. A cell phone registered in the Hands-. While talking on a cell phone regis-free system is calledtered in the Hands-free system. While setting the audioIf one of the following operations is. While seek tuning, PTY group tun-performed, the screensaver turns off anding, scan tuning or auto-storing whilethe operation screen will be FM/AM radio is on.. A cell phone registered in the Hands-. While the rear view camera is beingfree system is calledusedIf one of the following operations is& Downloading picturesperformed, the screensaver turns , the operation screen will notPerform the following procedure to down-be a picture to be used as screensaver.. Operate any button or any dial in a1. Connect a USB storage device. Refercondition other than the following condi-to “Connecting USB storage device /tionsiPod ® ” F5-25.– Pressing thebutton while a2. Select the “Picture Download” menumode other than the CD mode isby operating the “TUNE/TRACK/CH” details, refer to “Audio settings (type B– Pressing the volume control buttonsaudio)” the audio control buttons3. Select the preferred JPEG file by– Pressing the power switchoperating the “TUNE/TRACK/CH” dial.. Insert a CD (except reloading a CD)
5-56 Audio/Screensaver (type B audio)
Screensaver (type B audio)
. Connect a USB storage device or an
! Paraguay models
iPod ®
. Vendor: Tokyo Motors S.A.
. Vendor address: Avda. Eusebio Ayala
If the following operations are not per-
NOTE
4649 kg 5 1/2 Asuncion, Paraguay
formed for more than 30 seconds while
The screensaver is not displayed under
the audio is ON, the screensaver will be
the following conditions.
displayed.
. While the ignition switch is in the
. Operate any button or dial
“LOCK” (off) position
. Shift the shift lever/select lever to the
. While the audio is OFF
“R” position
. While the screen is OFF
. A cell phone registered in the Hands-
. While talking on a cell phone regis-
free system is called
tered in the Hands-free system
. While setting the audio
If one of the following operations is
. While seek tuning, PTY group tun-
performed, the screensaver turns off and
ing, scan tuning or auto-storing while
the operation screen will be displayed.
the FM/AM radio is on.
. A cell phone registered in the Hands-
. While the rear view camera is being
free system is called
used
If one of the following operations is
& Downloading pictures
performed, the screensaver turns off.
However, the operation screen will not
Perform the following procedure to down-
be displayed.
load a picture to be used as screensaver.
. Operate any button or any dial in a
1. Connect a USB storage device. Refer
condition other than the following condi-
to “Connecting USB storage device /
tions
iPod ® ” F5-25.
– Pressing the
button while a
2. Select the “Picture Download” menu
mode other than the CD mode is
by operating the “TUNE/TRACK/CH” dial.
selected
For details, refer to “Audio settings (type B
– Pressing the volume control buttons
audio)” F5-8.
of the audio control buttons
3. Select the preferred JPEG file by
– Pressing the power switch
operating the “TUNE/TRACK/CH” dial.
. Insert a CD (except reloading a CD)

Related Topics

Popular Owner Manuals