9-17
In case of emergency/Access key fob 3 if access key fob does not operate properly
Access key fob 3 if access key
& Locking and unlocking
& Switching power status
fob does not operate properly
S09AP01
S09AP02
1. Apply the parking brake.
2. Shift the shift lever to neutral (MT
S09AP
models) or the select lever to the <P=
CAUTION
(Park) position (CVT models).
3. Depress the clutch pedal (MT models)
Keep metallic objects, magnetic
or the brake pedal (CVT models).
sources and signal transmitters
away from the area between the
access key fob and the push-button
ignition switch. They may interfere
with the communication between
the access key fob and the push-
button ignition switch.
1)
Release button
The following functions may be inoperable
2)
Emergency key
because of strong radio signals in the
While pressing the release button of the
surrounding area or a low battery condition
access key fob, take out the emergency
of the access key fob.
key.
. Locking/unlocking doors (including the
Lock or unlock the driver9s door with the
rear gate)
emergency key in the procedure described
4. Hold the access key fob with the
. Switching power status
in <Locking and unlocking from the out-
buttons facing you, and touch the push-
. Starting engine
side= F2-21.
button ignition switch with it.
When the communication between the
In such cases, perform the following
NOTE
access key fob and the vehicle is com-
procedure. When the battery of the access
After locking or unlocking, be sure to
pleted, a chime (ding) will sound. At the
key fob is discharged, replace it with a new
attach the emergency key back to the
same time, the status of the push-button
one. Refer to <Replacing battery of access
access key fob.
ignition switch changes to either of the
key fob= F11-43.
following.
. When the keyless access with push-
button start system is deactivated:
3 CONTINUED 3
English 
