2017-2022 Subaru XV SUV In case of emergency -> Jump starting User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

In case of emergency -> Jump starting for Your Subaru XV SUV Second Generation (2017-2022)

9-9In case of emergency/Jump startingJump startingIf you have a flat tire, replace itone minute, promptly contact awith a spare tire as soon asSUBARU dealer to have the . When a spare tire is mounted or awheel rim is replaced without the. Battery fluid is SULFURIC pressure sensor/trans-Do not let it come in contact withmitter being transferred, the lowthe eyes, skin, clothing or thetire pressure warning light steadily after blinkingIf battery fluid gets on you, thor-for approximately one flush the exposed areaThis indicates the TPMS is unablewith water immediately. Get med-to monitor all four road help if the fluid has enteredContact your SUBARU dealer asyour as possible for tire andsensor replacement and/or sys-If battery fluid is accidentallytem , immediately drink alarge amount of milk or water,. When a tire is repaired with liquidand obtain immediate medicalsealant, the tire pressure and transmitter may notoperate properly. If a liquid sea-Keep everyone including chil-lant is used, contact your nearestdren away from the dealer or other qualified. The gas generated by a batteryservice shop as soon as possi-explodes if a flame or spark isble. Make sure to replace the tirebrought near it. Do not smoke orpressure warning valve andlight a match while jump when replacing the. Never attempt jump starting if thetire. You may reuse the wheel ifdischarged battery is frozen. Itthere is no damage to it and if thecould cause the battery to burstsealant residue is properlyor off.. Whenever working on or around aIf the light illuminates steadilybattery, always wear suitable eyeafter blinking for approximately3 CONTINUED 3
9-9
In case of emergency/Jump starting
Jump starting
If you have a flat tire, replace it
one minute, promptly contact a
with a spare tire as soon as
SUBARU dealer to have the sys-
S09AD
possible.
tem inspected.
WARNING
. When a spare tire is mounted or a
wheel rim is replaced without the
. Battery fluid is SULFURIC ACID.
original pressure sensor/trans-
Do not let it come in contact with
mitter being transferred, the low
the eyes, skin, clothing or the
tire pressure warning light will
vehicle.
illuminate steadily after blinking
If battery fluid gets on you, thor-
for approximately one minute.
oughly flush the exposed area
This indicates the TPMS is unable
with water immediately. Get med-
to monitor all four road wheels.
ical help if the fluid has entered
Contact your SUBARU dealer as
your eyes.
soon as possible for tire and
sensor replacement and/or sys-
If battery fluid is accidentally
tem resetting.
swallowed, immediately drink a
large amount of milk or water,
. When a tire is repaired with liquid
and obtain immediate medical
sealant, the tire pressure warning
help.
valve and transmitter may not
operate properly. If a liquid sea-
Keep everyone including chil-
lant is used, contact your nearest
dren away from the battery.
SUBARU dealer or other qualified
. The gas generated by a battery
service shop as soon as possi-
explodes if a flame or spark is
ble. Make sure to replace the tire
brought near it. Do not smoke or
pressure warning valve and
light a match while jump starting.
transmitter when replacing the
. Never attempt jump starting if the
tire. You may reuse the wheel if
discharged battery is frozen. It
there is no damage to it and if the
could cause the battery to burst
sealant residue is properly
or explode.
cleaned off.
. Whenever working on or around a
If the light illuminates steadily
battery, always wear suitable eye
after blinking for approximately
3 CONTINUED 3
9-10In case of emergency/Jump starting& How to jump startprotectors, and remove metalobjects such as rings, bands orS09AD011. Make sure the booster battery is 12other metal and the negative terminal is. Be sure the jumper cables on them do not have2. If the booster battery is in anotherloose or missing , do not let the two vehicles not jump start unless cables3. Turn off all unnecessary lights andin suitable condition are .4. Connect the jumper cables exactly in. A running engine can be danger-the sequence . Keep your fingers, hands,clothing, hair and tools awayfrom the cooling fan, belts andany other moving engine rings, watches andties is advisable.. Jump starting is dangerous if itdone incorrectly. If you are un-sure about the proper procedurefor jump starting, consult a com-petent your vehicle does not start due to arun down (discharged) battery, the vehiclemay be jump started by connecting yourbattery to another battery (called thebooster battery) with jumper cables.
9-10
In case of emergency/Jump starting
& How to jump start
protectors, and remove metal
objects such as rings, bands or
S09AD01
1. Make sure the booster battery is 12
other metal jewelry.
volts and the negative terminal is
. Be sure the jumper cables and
grounded.
clamps on them do not have
2. If the booster battery is in another
loose or missing insulation.
vehicle, do not let the two vehicles touch.
Do not jump start unless cables
3. Turn off all unnecessary lights and
in suitable condition are avail-
accessories.
able.
4. Connect the jumper cables exactly in
. A running engine can be danger-
the sequence illustrated.
ous. Keep your fingers, hands,
clothing, hair and tools away
from the cooling fan, belts and
any other moving engine parts.
Removing rings, watches and
ties is advisable.
. Jump starting is dangerous if it
done incorrectly. If you are un-
sure about the proper procedure
for jump starting, consult a com-
petent mechanic.
When your vehicle does not start due to a
run down (discharged) battery, the vehicle
may be jump started by connecting your
battery to another battery (called the
booster battery) with jumper cables.
9-11In case of emergency/Jump starting(1) Connect one jumper cable to thepositive (+) terminal on the dischargedbattery.(2) Connect the other end of thejumper cable to the positive (+) term-inal of the booster battery.(3) Connect one end of the other cableto the negative (2) terminal of thebooster battery.(4) Connect the other end of the cableto the strut mounting nut of the vehiclewith the discharged sure that the cables are not near anymoving parts and that the cable clamps arenot in contact with any other metal.5. Start the engine of the vehicle with thebooster battery and run it at moderatespeed. Then start the engine of the vehiclethat has the discharged battery.6. When finished, carefully disconnectthe cables in exactly the reverse order.A)Booster batteryB)Strut mounting nut
9-11
In case of emergency/Jump starting
(1) Connect one jumper cable to the
positive (+) terminal on the discharged
battery.
(2) Connect the other end of the
jumper cable to the positive (+) term-
inal of the booster battery.
(3) Connect one end of the other cable
to the negative (2) terminal of the
booster battery.
(4) Connect the other end of the cable
to the strut mounting nut of the vehicle
with the discharged battery.
Make sure that the cables are not near any
moving parts and that the cable clamps are
not in contact with any other metal.
5. Start the engine of the vehicle with the
booster battery and run it at moderate
speed. Then start the engine of the vehicle
that has the discharged battery.
6. When finished, carefully disconnect
the cables in exactly the reverse order.
A)
Booster battery
B)
Strut mounting nut

Related Topics

Popular Owner Manuals