2017-2022 Subaru XV SUV In case of emergency -> Flat tires User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

In case of emergency -> Flat tires for Your Subaru XV SUV Second Generation (2017-2022)

9-5In case of emergency/Flat tiresFlat tiresS09ACIf you have a flat tire while driving, neverbrake suddenly; keep driving straightahead while gradually reducing slowly pull off the road to a safeplace.& Changing a flat tireS09AC01WARNING. Do not jack up the vehicle on anJack-up points7. Insert the jack handle into the jack-incline or a loose road , and turn the handle until the tire6. Place the jack under the side sill at theThe jack can come out of theclears the ground. Do not raise the vehiclefront or rear jack-up point closest to the tirejacking point or sink into thehigher than you are going to and this can result in asevere accident.. Use only the jack provided withyour vehicle. The jack suppliedwith the vehicle is designed onlyfor changing a tire. Never getunder the vehicle while support-ing the vehicle with this jack.. Always turn off the engine beforeraising the flat tire off the groundusing the jack. Never swing orpush the vehicle supported withthe jack. The jack can come out ofthe jacking point due to a jolt andTurn the jackscrew by hand until the jackthis can result in a severe acci-head engages firmly into the jack-up point.3 CONTINUED 3
9-5
In case of emergency/Flat tires
Flat tires
S09AC
If you have a flat tire while driving, never
brake suddenly; keep driving straight
ahead while gradually reducing speed.
Then slowly pull off the road to a safe
place.
& Changing a flat tire
S09AC01
WARNING
. Do not jack up the vehicle on an
Jack-up points
7. Insert the jack handle into the jack-
incline or a loose road surface.
screw, and turn the handle until the tire
6. Place the jack under the side sill at the
The jack can come out of the
clears the ground. Do not raise the vehicle
front or rear jack-up point closest to the tire
jacking point or sink into the
higher than necessary.
that you are going to replace.
ground and this can result in a
severe accident.
. Use only the jack provided with
your vehicle. The jack supplied
with the vehicle is designed only
for changing a tire. Never get
under the vehicle while support-
ing the vehicle with this jack.
. Always turn off the engine before
raising the flat tire off the ground
using the jack. Never swing or
push the vehicle supported with
the jack. The jack can come out of
the jacking point due to a jolt and
Turn the jackscrew by hand until the jack
this can result in a severe acci-
head engages firmly into the jack-up point.
3 CONTINUED 3
9-6In case of emergency/Flat sure that the jack is well lubri-cated before using it.1. Park on a hard, level surface, when-ever possible, then stop the engine.2. Apply the parking brake securely andshift the shift lever in reverse (MT models)or the select lever to the <P= (Park) position(CVT models).3. Turn on the hazard warning flasher andhave everyone get out of the vehicle.7. Loosen the wheel nuts using the wheelnut wrench but do not remove the nuts.6. Take out the tool bucket and turn theattaching bolt counterclockwise, then takethe spare tire the spare tire provided in your vehicleis a temporary spare tire, carefully read<Temporary spare tire= F9-2 and4. Put wheel blocks at the front and rearstrictly follow the the tire diagonally opposite the flat tire.5. Take out the jack, jack handle andwheel nut tools and the spare tire are storedJack-up pointsunder the cargo area. Refer to <Mainte-8. Place the jack under the side sill at thenance tools= or rear jack-up point closest to the flattire.
9-6
In case of emergency/Flat tires
NOTE
dent.
Make sure that the jack is well lubri-
cated before using it.
1. Park on a hard, level surface, when-
ever possible, then stop the engine.
2. Apply the parking brake securely and
shift the shift lever in reverse (MT models)
or the select lever to the <P= (Park) position
(CVT models).
3. Turn on the hazard warning flasher and
have everyone get out of the vehicle.
7. Loosen the wheel nuts using the wheel
nut wrench but do not remove the nuts.
6. Take out the tool bucket and turn the
attaching bolt counterclockwise, then take
the spare tire out.
NOTE
If the spare tire provided in your vehicle
is a temporary spare tire, carefully read
<Temporary spare tire= F9-2 and
4. Put wheel blocks at the front and rear
strictly follow the instructions.
of the tire diagonally opposite the flat tire.
5. Take out the jack, jack handle and
wheel nut wrench.
The tools and the spare tire are stored
Jack-up points
under the cargo area. Refer to <Mainte-
8. Place the jack under the side sill at the
nance tools= F9-3.
front or rear jack-up point closest to the flat
tire.
9-7In case of emergency/Flat tires10. Remove the wheel nuts and the flatwheel nuts. Tighten them by not use oil or grease on the wheelstuds or nuts when the spare tire isinstalled. This could cause the nutsto become loose and lead to anaccident.13. Turn the jack handle counterclockwiseto lower the the jackscrew by hand until the jackhead engages firmly into the jack-up point.14. Use the wheel nut wrench to securelytighten the wheel nuts to the specifiedtorque, following the tightening order in theillustration.11. Before putting the spare tire on, clean9. Insert the jack handle into the jack-For the wheel nut tightening torque, referthe mounting surface of the wheel and hubscrew, and turn the handle until the tireto <Tires= F12-8. Never use your foot onwith a the ground. Do not raise the vehiclethe wheel nut wrench or a pipe extensionhigher than necessary.12. Put on the spare tire. Replace the3 CONTINUED 3
9-7
In case of emergency/Flat tires
10. Remove the wheel nuts and the flat
wheel nuts. Tighten them by hand.
tire.
WARNING
Do not use oil or grease on the wheel
studs or nuts when the spare tire is
installed. This could cause the nuts
to become loose and lead to an
accident.
13. Turn the jack handle counterclockwise
to lower the vehicle.
Turn the jackscrew by hand until the jack
head engages firmly into the jack-up point.
14. Use the wheel nut wrench to securely
tighten the wheel nuts to the specified
torque, following the tightening order in the
illustration.
11. Before putting the spare tire on, clean
9. Insert the jack handle into the jack-
For the wheel nut tightening torque, refer
the mounting surface of the wheel and hub
screw, and turn the handle until the tire
to <Tires= F12-8. Never use your foot on
with a cloth.
clears the ground. Do not raise the vehicle
the wheel nut wrench or a pipe extension
higher than necessary.
12. Put on the spare tire. Replace the
3 CONTINUED 3
9-8In case of emergency/Flat tireson the wrench because you may exceedThe tire pressure monitoring system willWARNINGthe specified torque. Have the wheel nutactivate only when the vehicle is checked at the nearest automotiveAlso, this system may not react immedi-Never place a tire or tire changingservice to a sudden drop in tire pressure (fortools in the passenger compartmentexample, a blow-out caused running overafter changing wheels. In a suddena sharp object).stop or collision, loose equipmentcould strike occupants and causeWARNINGinjury. Store the tire and all tools inthe proper place.. If the low tire pressure warninglight illuminates while driving,& Tire pressure monitoringnever brake suddenly. Instead,system (TPMS) (U.S.- the following )(1) Keep driving straight aheadS09AC02while gradually reducingspeed.(2) Slowly pull off the road to a1)Support holdersafe place. Otherwise an acci-dent involving serious vehicle15. Store the flat tire in the spare tiredamage and serious personalcompartment. Install with the supportinjury could facing upward and secure the flat(3) Check the pressure for all fourtire by firmly tightening the attaching and adjust the pressureNOTEto the COLD tire pressureshown on the vehicle placardIf you cannot fix the flat tire firmly, tryon the door pillar on theturning the support holder upsidedriver9s tire pressure monitoring system pro-If this light still illuminates while16. Store the jack, jack handle and wheelvides the driver with the warning messagedriving after adjusting the tirenut wrench in their storage by sending a signal from apressure, a tire may have signifi-sensor that is installed in each wheel whencant damage and a fast leak thattire pressure is severely the tire to lose air rapidly.
9-8
In case of emergency/Flat tires
on the wrench because you may exceed
The tire pressure monitoring system will
WARNING
the specified torque. Have the wheel nut
activate only when the vehicle is driven.
torque checked at the nearest automotive
Also, this system may not react immedi-
Never place a tire or tire changing
service facility.
ately to a sudden drop in tire pressure (for
tools in the passenger compartment
example, a blow-out caused running over
after changing wheels. In a sudden
a sharp object).
stop or collision, loose equipment
could strike occupants and cause
WARNING
injury. Store the tire and all tools in
the proper place.
. If the low tire pressure warning
light illuminates while driving,
& Tire pressure monitoring
never brake suddenly. Instead,
system (TPMS) (U.S.-spec.
perform the following procedure.
models)
(1) Keep driving straight ahead
S09AC02
while gradually reducing
speed.
(2) Slowly pull off the road to a
1)
Support holder
safe place. Otherwise an acci-
dent involving serious vehicle
15. Store the flat tire in the spare tire
damage and serious personal
compartment. Install with the support
injury could occur.
holder facing upward and secure the flat
(3) Check the pressure for all four
tire by firmly tightening the attaching bolt.
tires and adjust the pressure
NOTE
to the COLD tire pressure
shown on the vehicle placard
If you cannot fix the flat tire firmly, try
on the door pillar on the
turning the support holder upside
driver9s side.
down.
The tire pressure monitoring system pro-
If this light still illuminates while
16. Store the jack, jack handle and wheel
vides the driver with the warning message
driving after adjusting the tire
nut wrench in their storage locations.
indicated by sending a signal from a
pressure, a tire may have signifi-
sensor that is installed in each wheel when
cant damage and a fast leak that
tire pressure is severely low.
causes the tire to lose air rapidly.
9-9In case of emergency/Jump startingJump startingIf you have a flat tire, replace itone minute, promptly contact awith a spare tire as soon asSUBARU dealer to have the . When a spare tire is mounted or awheel rim is replaced without the. Battery fluid is SULFURIC pressure sensor/trans-Do not let it come in contact withmitter being transferred, the lowthe eyes, skin, clothing or thetire pressure warning light steadily after blinkingIf battery fluid gets on you, thor-for approximately one flush the exposed areaThis indicates the TPMS is unablewith water immediately. Get med-to monitor all four road help if the fluid has enteredContact your SUBARU dealer asyour as possible for tire andsensor replacement and/or sys-If battery fluid is accidentallytem , immediately drink alarge amount of milk or water,. When a tire is repaired with liquidand obtain immediate medicalsealant, the tire pressure and transmitter may notoperate properly. If a liquid sea-Keep everyone including chil-lant is used, contact your nearestdren away from the dealer or other qualified. The gas generated by a batteryservice shop as soon as possi-explodes if a flame or spark isble. Make sure to replace the tirebrought near it. Do not smoke orpressure warning valve andlight a match while jump when replacing the. Never attempt jump starting if thetire. You may reuse the wheel ifdischarged battery is frozen. Itthere is no damage to it and if thecould cause the battery to burstsealant residue is properlyor off.. Whenever working on or around aIf the light illuminates steadilybattery, always wear suitable eyeafter blinking for approximately3 CONTINUED 3
9-9
In case of emergency/Jump starting
Jump starting
If you have a flat tire, replace it
one minute, promptly contact a
with a spare tire as soon as
SUBARU dealer to have the sys-
S09AD
possible.
tem inspected.
WARNING
. When a spare tire is mounted or a
wheel rim is replaced without the
. Battery fluid is SULFURIC ACID.
original pressure sensor/trans-
Do not let it come in contact with
mitter being transferred, the low
the eyes, skin, clothing or the
tire pressure warning light will
vehicle.
illuminate steadily after blinking
If battery fluid gets on you, thor-
for approximately one minute.
oughly flush the exposed area
This indicates the TPMS is unable
with water immediately. Get med-
to monitor all four road wheels.
ical help if the fluid has entered
Contact your SUBARU dealer as
your eyes.
soon as possible for tire and
sensor replacement and/or sys-
If battery fluid is accidentally
tem resetting.
swallowed, immediately drink a
large amount of milk or water,
. When a tire is repaired with liquid
and obtain immediate medical
sealant, the tire pressure warning
help.
valve and transmitter may not
operate properly. If a liquid sea-
Keep everyone including chil-
lant is used, contact your nearest
dren away from the battery.
SUBARU dealer or other qualified
. The gas generated by a battery
service shop as soon as possi-
explodes if a flame or spark is
ble. Make sure to replace the tire
brought near it. Do not smoke or
pressure warning valve and
light a match while jump starting.
transmitter when replacing the
. Never attempt jump starting if the
tire. You may reuse the wheel if
discharged battery is frozen. It
there is no damage to it and if the
could cause the battery to burst
sealant residue is properly
or explode.
cleaned off.
. Whenever working on or around a
If the light illuminates steadily
battery, always wear suitable eye
after blinking for approximately
3 CONTINUED 3

Related Topics

Popular Owner Manuals