Get Instruments and controls -> Combination meter display (color LCD) (if equipped) Guide for Subaru XV SUV Second Generation (2017-2022)

$3-33Instruments and controls/Combination meter display (color LCD)Combination meter displayF3-35.)6)Select lever/gear position indicator (refer(color LCD) (if equipped)to <Select lever/gear position indicator(CVT models)= F3-30.)S03BN7)X-mode indicator (if equipped) (refer toWARNING<X-mode indicator= F3-32.)8)Odometer (refer to <Odometer= F3-9.)/double trip meter (refer to <Double tripAlways pay adequate attention tometer= F3-9.)safe driving when operating the9)Fuel gauge (refer to <Fuel gauge= F3-combination meter display (color10.)LCD) while the vehicle is in motion.A:Deactivating the Eyesight system orWhen operation of the combinationmodels without the Eyesight systemB:Activating the Eyesight systemmeter display (color LCD) interfereswith your ability to concentrate ondriving, stop the vehicle beforeperforming operations on thescreen. Also, do not concentrate onthe display while driving. Doing somay cause you to look away from theroad and could result in an information will be shown on thecombination meter display (color LCD).Also, a warning message will appear onthe display if a malfunction, etc. isdetected. In addition, several settings forthe displayed content can be meter display (color LCD)1) ECO gauge2) Warning screen (refer to <Warningscreen= F3-35.)/Basic screen (refer to<Basic screens= F3-36.)3) EyeSight screen4) Cruise control information display5) Telltale screen (refer to <Telltale screen=3 CONTINUED 3$

3-33

Instruments and controls/Combination meter display (color LCD)

Combination meter display

F3-35.)

Select lever/gear position indicator (refer

(color LCD) (if equipped)

to <Select lever/gear position indicator

(CVT models)= F3-30.)

S03BN

X-mode indicator (if equipped) (refer to

WARNING

<X-mode indicator= F3-32.)

Odometer (refer to <Odometer= F3-9.)/

double trip meter (refer to <Double trip

Always pay adequate attention to

meter= F3-9.)

safe driving when operating the

Fuel gauge (refer to <Fuel gauge= F3-

combination meter display (color

10.)

LCD) while the vehicle is in motion.

Deactivating the Eyesight system or

When operation of the combination

models without the Eyesight system

Activating the Eyesight system

meter display (color LCD) interferes

with your ability to concentrate on

driving, stop the vehicle before

performing operations on the

screen. Also, do not concentrate on

the display while driving. Doing so

may cause you to look away from the

road and could result in an accident.

Various information will be shown on the

combination meter display (color LCD).

Also, a warning message will appear on

the display if a malfunction, etc. is

detected. In addition, several settings for

the displayed content can be performed.

Combination meter display (color LCD)

1) ECO gauge

2) Warning screen (refer to <Warning

screen= F3-35.)/Basic screen (refer to

<Basic screens= F3-36.)

3) EyeSight screen

4) Cruise control information display

5) Telltale screen (refer to <Telltale screen=

3 CONTINUED 3

3-34

Instruments and controls/Combination meter display (color LCD)

NOTE

& Basic operation

original screen after a few seconds. While

the < = information reminder is shown on

. Once the welcome screen appears, it

S03BN01

the display, it may be possible to display

takes a certain period of time to display

the warning screen again. To recall the

it again.

message marked with < = on the display,

. If the ignition switch is operated

pull the < /SET= switch on the steering

after unlocking the driver9s door, the

wheel toward you.

welcome screen will not appear even

when the driver9s door is opened and

NOTE

closed.

When the multi-function display (color

. The welcome screen will disappear

LCD) is set to the setting screen, the

when you lock the driver9s door by

combination meter display (color LCD)

using the remote keyless entry system

cannot be controlled pressing on the

(all models) or the keyless access

< =, < = and < /SET= on the control

function (if equipped) while the wel-

switch.

come screen is displayed.

Control switch

. The welcome screen including the

(Up)

& Welcome screen and Good-

multi-function display (color LCD) (if

/SET (enter)

equipped) and the audio/navigation

(Down)

bye screen

unit can be set to on or off. For details,

S03BN08

By operating < = or < = of the control

When the driver9s door is opened and

refer to <Welcome Screen= F3-41.

switch, the screens and selection items

closed after unlocking the door, the wel-

can be switched. When the < /SET=

come screen will appear on the combina-

switch is pulled toward you, the item can

tion meter display (color LCD) for approxi-

be selected and set.

mately 20 seconds.

When the ignition switch is turned to the

If there are some useful messages, such

<LOCK=/<OFF= position, the combination

as vehicle information, warning informa-

meter display (color LCD) gradually turns

tion, etc., they will interrupt the current

off (Good-bye screen).

screen, and appear on the display accom-

panied by a beep. If such a screen is

displayed, take proper action according to

the message shown on the screen.

The warning screen will return to the

3-35

Instruments and controls/Combination meter display (color LCD)

& Warning screen

& Telltale screen

Mark

Name

Page

S03BN05

S03BN09

Door open indicator

3-22

LED headlight warning

3-31

indicator (if equipped)

High beam assist indi-

cator (green) (if

3-30

equipped)

Steering Responsive

Headlight warning light

3-31

(if equipped)

Engine low oil level

3-18

Example of warning

warning indicator

Telltale screen

If there is a warning message or a

When the corresponding situation occurs,

RAB warning indicator

maintenance notification, it will appear on

3-32

the following telltales will be displayed on

(if equipped)

this screen. Take the appropriate actions

the telltale screen.

based on the messages indicated.

RAB OFF indicator (if

NOTE

3-32

equipped)

When there is warning information to

display, it will be displayed in five

BSD/RCTA warning in-

3-32

dicator (if equipped)

warning indicators, starting on the left

in ascending order of severity. If there

BSD/RCTA OFF indi-

are six or more warning information

3-32

cator (if equipped)

displayed, pull the < /SET= switch and

check the item.

Automatic headlight

beam leveler system

malfunction warning

3-31

(models with LED

headlights)

3 CONTINUED 3

3-36

Instruments and controls/Combination meter display (color LCD)

& Basic screens

Current fuel consumption screen:

Mark

Name

Page

S03BN06

Steering responsive fog

By operating the < = or < = switch on the

lights OFF indicator (if

3-31

steering wheel, you can change the screen

equipped)

that is always displayed.

High beam assist warn-

Average fuel consumption screen:

ing indicator (yellow) (if

3-30

equipped)

Windshield washer fluid

3-18

warning indicator

Hill descent control in-

3-32

dicator (if equipped)

Icy road surface warn-

3-32

ing indicator

: Current fuel consumption

: Driving range on remaining fuel

This screen displays the rate of fuel

consumption at the present moment.

: Average fuel consumption

NOTE

: Driving range on remaining fuel

The driving range on remaining fuel is

This screen displays the average rate of

only a guide. The indicated value may

fuel consumption since the trip meter was

differ from the actual driving range on

last reset.

remaining fuel, so you must immedi-

ately fill the tank when the low fuel

NOTE

warning light illuminates.

The driving range on remaining fuel is

only a guide. The indicated value may

differ from the actual driving range on

remaining fuel, so you must immedi-

ately fill the tank when the low fuel

warning light illuminates.

3-37

Instruments and controls/Combination meter display (color LCD)

Driving information screen:

Digital speed screen:

TPMS screen (U.S.-spec. models):

: Journey time

Speed limit indicator (if equipped)

This screen displays each tire pressure.

: Journey distance

Vehicle speed

When a tire is deflated, the deflated tire

This screen displays the journey time (the

This screen displays the current vehicle

and the tire pressure will be displayed on

time that has elapsed since the ignition

speed.

the screen in yellow.

switch was turned to the <ON= position)

NOTE

and journey distance (the distance that

has been driven since the ignition switch

The tire pressure values are displayed

was turned to the <ON= position).

several minutes after driving.

3 CONTINUED 3

3-38

Instruments and controls/Combination meter display (color LCD)

Menu screen entering screen:

& Menu screens

S03BN07

Pull and hold the < /SET= switch to enter

the menu screens when all of the following

conditions are satisfied.

. The menu screen entering screen is

selected.

. The < = information reminder is off.

NOTE

While driving, the setting items avail-

able on the combination meter display

(color LCD) are limited.

While this screen is selected, pull and hold

the < /SET= switch to enter the menu

screen.

3-39

Instruments and controls/Combination meter display (color LCD)

The menu list is as follows.

2nd menu

3rd menu

1st menu

Screen Settings

Welcome Screen

Good-bye Screen

Gauge Initial Movement

Units

Tire Pressure Units (if equipped)

Languages

Warning Volume* (if equipped)

EyeSight (models with EyeSight system)

Lead Vehicle Acquisition Sound

Lead Vehicle Moving Monitor Function

Cruise Control Acceleration Characteristics*

RAB (if equipped)

Sonar Audible Alarm

*: You can also set this while driving.

3 CONTINUED 3

3-40

Instruments and controls/Combination meter display (color LCD)

2nd menu

3rd menu

1st menu

Vehicle Setting

Keyless Entry System

Audible Signal (if equipped)

Hazard Warning Flasher

Security Relocking (if equipped)

Driver Door Unlock (if equipped)

Rear Gate/Trunk Unlock (if equipped)

Defogger

Interior Light

Auto Light Sensor (if equipped)

Welcome Lighting (if equipped)

Approaching Time Set

Leaving Time Set

One-touch lane changer

Default Settings

3-41

Instruments and controls/Combination meter display (color LCD)

By operating the < = or < = switch on the

LCD).

! Sonar Audible Alarm

steering wheel, you can select the menu.

S03BN071204

When the Reverse Automatic Braking

! Tire Pressure Units (if equipped)

Pull the < /SET= switch to enter the

system is in operation, the warning sound

S03BN070109

Changes the units displayed in the Tire

selected menu.

to notify that an obstacle is detected in the

Pressure Monitoring system.

rear can be activated or deactivated.

NOTE

! Languages

! Vehicle Setting

If you enter the <Go Back= menu, the

S03BN070103

Changes the language displayed in the

S03BN0708

system will return to the previous

After entering the <Vehicle Setting= menu,

combination meter display (color LCD)

screen.

select one of the following menus.

and the multi-function display (color LCD).

! Screen Settings

! Keyless Entry System

! Warning Volume (if equipped)

S03BN0701

S03BN070801

After entering the <Screen Settings= menu,

Sets the settings used when the keyless

S03BN0713

Sets the EyeSight warning volume, the

select one of the following menus.

access function was operated.

BSD/RCTA warning volume and the RAB

. Audible Signal (if equipped)

warning volume.

! Welcome Screen

Sets the electronic chirp that sounds when

S03BN070101

! EyeSight (models with EyeSight

The welcome screen can be activated or

the door is locked or unlocked.

system)

deactivated.

. Hazard Warning Flasher

S03BN0702

NOTE

! Good-bye Screen

Sets the operation of the hazard warning

For models with the EyeSight system,

S03BN070106

flasher that blinks when the door is locked

The good-bye screen can be activated or

refer to the Owner9s Manual supple-

or unlocked.

deactivated.

ment for the EyeSight system.

. Security Relocking (if equipped)

! Gauge Initial Movement

The automatic locking operation period

! RAB (models with EyeSight system)

S03BN070102

The movement of the meter needles and

can be set or customized. Select the

S03BN0712

The Sonar Audible Alarm can be set to on

gauge needles that occurs when the

preferred seconds to customize the opera-

or off.

ignition switch is turned to the <ON=

tion period.

position can be activated or deactivated.

NOTE

. Driver Door Unlock (if equipped)

! Units

Select only the driver9s door to unlock or all

For models with Reverse Automatic

doors to unlock simultaneously when the

S03BN070108

Braking system, refer to <Reverse

Changes the units displayed in the combi-

driver9s door is unlocked.

Automatic Braking System= F7-61.

nation meter display (color LCD), the type

. Rear Gate/Trunk Unlock (if equipped)

A multi-function display (black and white)

and the type B multi-function display (color

Select only the rear gate to unlock or all

3 CONTINUED 3

Instruments and controls -> Combination meter display (color LCD) (if equipped) for Your Subaru XV SUV Second Generation (2017-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals