2017-2022 Subaru XV SUV Instruments and controls -> Push-button ignition switch (models with keyless access with push-button start system) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Push-button ignition switch (models with keyless access with push-button start system) for Your Subaru XV SUV Second Generation (2017-2022)

3-6Instruments and controls/Push-button ignition switch (models with <keyless access with push-button start system=)Push-button ignition switchThe light turns off immediately under thecannot be conditions.. Even when the access key fob is(models with <keyless accessoutside the vehicle, if it is placed too. when the ignition switch is turned to thewith push-button start sys-close to the glass, it may be possible to<ON= positiontem=)switch the power or to start the engine.. when all doors and the rear gate are. Do not leave the access key fob inlocked using the remote keyless entryS03BG& Safety precautionsthe following places. It may becometransmitterS03BG04impossible to operate the push-buttonRefer to <Safety precautions= switch and the engine start. It& Operating range for push-may also cause a false warning to issuealthough no malfunction actually oc-button start systemcurs, or not to issue a warning whenS03BG01any malfunction occurs.3 On the instrument panel3 On the floor3 Inside the glove box3 Inside the door trim pocket3 On the rear seat3 In the cargo area. When operating the push-buttonignition switch or starting the engine,if the access key fob battery is dis-charged, perform the procedure de-scribed in <Access key fob 3 if accesskey fob does not operate properly= F9-1)Antenna17. In such a case, replace the battery2)Operating rangeimmediately. Refer to <Replacing bat-NOTEtery of access key fob= F11-43.. If the access key fob is not detectedwithin the operating range of the anten-nas inside the vehicle, the push-buttonignition switch and the engine start
3-6
Instruments and controls/Push-button ignition switch (models with <keyless access with push-button start system=)
Push-button ignition switch
The light turns off immediately under the
cannot be operated.
following conditions.
. Even when the access key fob is
(models with <keyless access
outside the vehicle, if it is placed too
. when the ignition switch is turned to the
with push-button start sys-
close to the glass, it may be possible to
<ON= position
tem=)
switch the power or to start the engine.
. when all doors and the rear gate are
. Do not leave the access key fob in
locked using the remote keyless entry
S03BG
& Safety precautions
the following places. It may become
transmitter
S03BG04
impossible to operate the push-button
Refer to <Safety precautions= F2-3.
ignition switch and the engine start. It
& Operating range for push-
may also cause a false warning to issue
although no malfunction actually oc-
button start system
curs, or not to issue a warning when
S03BG01
any malfunction occurs.
3 On the instrument panel
3 On the floor
3 Inside the glove box
3 Inside the door trim pocket
3 On the rear seat
3 In the cargo area
. When operating the push-button
ignition switch or starting the engine,
if the access key fob battery is dis-
charged, perform the procedure de-
scribed in <Access key fob 3 if access
key fob does not operate properly= F9-
1)
Antenna
17. In such a case, replace the battery
2)
Operating range
immediately. Refer to <Replacing bat-
NOTE
tery of access key fob= F11-43.
. If the access key fob is not detected
within the operating range of the anten-
nas inside the vehicle, the push-button
ignition switch and the engine start
3-7Instruments and controls/Push-button ignition switch (models with <keyless access with push-button start system=)& Switching power statusilluminates in oil or other contaminants. Itmay cause a malfunction.S03BG02. If the push-button ignition switchPowerIndicator colorOperationstatusdoes not operate smoothly, stopthe operation. Contact a SUBARUPower is turnedOFFTurned offdealer .. If the push-button ignition switchThe followingsystems can bedoes not illuminate even whenused:ACCOrangethe instrument panel illuminationaudio and ac-is turned on, have the vehiclecessory at a SUBARU . If the vehicle was left in the hot(while engine issun for a long time, the surface ofAll electricalstopped)the push-button ignition switchONsystems can be1)Operation indicatorTurned get hot. Be careful not to2)Push-button ignition switch(while engine isburn )The power is switched every time thepush-button ignition switch is 1. Carry the access key fob, and sit in the. When operating the push-buttondriver9s seat.. When the push-button ignitionignition switch, firmly press it all the2. Shift the select lever (CVT models)/theswitch is left in <ON= (while lever (MT models) into the <P=/<N=engine is not running) or <ACC=. If the push-button ignition switch a long time, it may result inpressed quickly, the power may not3. Press the push-button ignition switchvehicle battery on or depressing the brake pedal. Every. Do not spill drinks or other liquidstime the button is pressed, the power ison the push-button ignitionswitched in the sequence of <OFF=, <ACC=,switch. It may cause a malfunc-<ON= and <OFF=. When the engine and the push-button ignition. Do not touch the push-buttonswitch is in <ACC= or <ON=, the operationignition switch with a hand soiledindicator on the push-button ignition switch3 CONTINUED 3
3-7
Instruments and controls/Push-button ignition switch (models with <keyless access with push-button start system=)
& Switching power status
illuminates in orange.
with oil or other contaminants. It
may cause a malfunction.
S03BG02
. If the push-button ignition switch
Power
Indicator color
Operation
status
does not operate smoothly, stop
the operation. Contact a SUBARU
Power is turned
OFF
Turned off
dealer immediately.
off.
. If the push-button ignition switch
The following
systems can be
does not illuminate even when
used:
ACC
Orange
the instrument panel illumination
audio and ac-
is turned on, have the vehicle
cessory power
outlet.
inspected at a SUBARU dealer.
Orange
. If the vehicle was left in the hot
(while engine is
sun for a long time, the surface of
All electrical
stopped)
the push-button ignition switch
ON
systems can be
1)
Operation indicator
Turned off
used.
may get hot. Be careful not to
2)
Push-button ignition switch
(while engine is
burn yourself.
running)
The power is switched every time the
push-button ignition switch is pressed.
NOTE
CAUTION
1. Carry the access key fob, and sit in the
. When operating the push-button
driver9s seat.
. When the push-button ignition
ignition switch, firmly press it all the
2. Shift the select lever (CVT models)/the
switch is left in <ON= (while the
way.
shift lever (MT models) into the <P=/<N=
engine is not running) or <ACC=
. If the push-button ignition switch is
position.
for a long time, it may result in
pressed quickly, the power may not
3. Press the push-button ignition switch
vehicle battery discharge.
turn on or off.
without depressing the brake pedal. Every
. Do not spill drinks or other liquids
time the button is pressed, the power is
on the push-button ignition
switched in the sequence of <OFF=, <ACC=,
switch. It may cause a malfunc-
<ON= and <OFF=. When the engine is
tion.
stopped and the push-button ignition
. Do not touch the push-button
switch is in <ACC= or <ON=, the operation
ignition switch with a hand soiled
indicator on the push-button ignition switch
3 CONTINUED 3
3-8Instruments and controls/Hazard warning flasher. If the indicator light on the push-Hazard warning flasherMeters and gaugesbutton ignition switch flashes in greenS03ABS03ADwhen the push-button ignition switch isNOTEpressed, steering is locked. When thisSome of the meters and gauges on theoccurs, press the push-button ignitioncombination meter use liquid-crystalswitch while turning the steering wheeldisplays. You will find their indicationsleft and to see if you wear polarized! Battery drainage prevention 03BG0201When the push-button ignition switch is left& Speedometerin the <ACC= or <ON= position for approxi-S03AD03The speedometer shows the vehiclemately 1 hour, the push-button will be automatically switched to<OFF= to prevent the battery from going& hazard warning flasher is used to warnS03AD06The tachometer shows the engine speed& When access key fob doesother drivers when you have to park yourin thousands of revolutions per under emergency conditions. Thenot operate properlyhazard warning flasher works regardlessS03BG03CAUTIONRefer to <Access key fob 3 if access keyof the position of the ignition does not operate properly= not operate the engine with theTo turn on the hazard warning flasher,pointer of the tachometer in the redpush the hazard warning button on thezone. In this range, fuel injection willinstrument panel. All the turn signal lightsbe cut by the engine control moduleand the turn signal indicator lights willto protect the engine from overrev-flash. To turn off the flasher, push theving. The engine will resume run-button normally after the engine speedNOTEis reduced below the red the hazard warning flasher is on,the turn signals do not work.
3-8
Instruments and controls/Hazard warning flasher
. If the indicator light on the push-
Hazard warning flasher
Meters and gauges
button ignition switch flashes in green
S03AB
S03AD
when the push-button ignition switch is
NOTE
pressed, steering is locked. When this
Some of the meters and gauges on the
occurs, press the push-button ignition
combination meter use liquid-crystal
switch while turning the steering wheel
displays. You will find their indications
left and right.
hard to see if you wear polarized
! Battery drainage prevention func-
glasses.
tion
S03BG0201
When the push-button ignition switch is left
& Speedometer
in the <ACC= or <ON= position for approxi-
S03AD03
The speedometer shows the vehicle
mately 1 hour, the push-button ignition
speed.
switch will be automatically switched to
<OFF= to prevent the battery from going
& Tachometer
dead.
The hazard warning flasher is used to warn
S03AD06
The tachometer shows the engine speed
& When access key fob does
other drivers when you have to park your
in thousands of revolutions per minute.
vehicle under emergency conditions. The
not operate properly
hazard warning flasher works regardless
S03BG03
CAUTION
Refer to <Access key fob 3 if access key
of the position of the ignition switch.
fob does not operate properly= F9-17.
Do not operate the engine with the
To turn on the hazard warning flasher,
pointer of the tachometer in the red
push the hazard warning button on the
zone. In this range, fuel injection will
instrument panel. All the turn signal lights
be cut by the engine control module
and the turn signal indicator lights will
to protect the engine from overrev-
flash. To turn off the flasher, push the
ving. The engine will resume run-
button again.
ning normally after the engine speed
NOTE
is reduced below the red zone.
When the hazard warning flasher is on,
the turn signals do not work.

Related Topics

Popular Owner Manuals