Get Instruments and controls -> Multi-function display (color LCD) (if equipped) Guide for Subaru XV SUV Second Generation (2017-2022)

3-47

Instruments and controls/Multi-function display (color LCD)

condition of the road surface before

Multi-function display (color

! Road surface freeze warning indi-

driving.

cation

LCD) (if equipped)

S03BO0101

S03BP

& X-mode indicator (if

NOTE

equipped)

S03BO12

For models with multi-function display

This indicator will be shown while the X-

(black and white), refer to <Multi-func-

mode is activated. It will turn off when the

tion display (black and white)= F3-42.

X-mode is deactivated.

WARNING

& Clock

Always pay adequate attention to

S03BO10

For details about clock setting, refer to

safe driving when operating the

<Clock= F3-62.

multi-function display (color LCD)

while the vehicle is in motion. When

operation of the multi-function dis-

U.S.-spec. models

play (color LCD) is disturbing your

Except U.S.-spec. models

awareness and ability to concen-

When the outside temperature drops to a

trate on driving, stop the vehicle in

certain temperature or lower, the tempera-

a safe place before performing op-

ture indication flashes for 5 seconds to

erations on the screen. Also, do not

show that the road surface may be frozen.

concentrate on the display while

If the display is already indicating that the

driving. Doing so may cause you to

outside temperature is low when the

look away from the road and could

ignition switch is turned to the <ON=

result in an accident.

position, the indication does not flash.

NOTE

The outside temperature indication

may differ from the actual outside

temperature. The road surface freeze

warning indication should be treated

only as a guide. Be sure to check the

3 CONTINUED 3

3-48

Instruments and controls/Multi-function display (color LCD)

& Features

& Welcome screen

& Self-check screen

S03BP25

S03BP07

S03BP09

The multi-function display (color LCD) has

When the driver9s door is opened and

NOTE

the following functions.

closed, the welcome screen will appear for

When the setting is <On=, the self check

a short time.

screen appears. For details about this

Description

Page

setting, refer to <On/Off setting= F3-61.

NOTE

Displays useful messages, such

3-49

When the ignition switch is turned to the

. The welcome screen will disappear

as notification, etc.

<ON= position, the vehicle self-check will

when the ignition switch is turned to the

Displays basic screens (e.g. fuel

3-50

be performed. The screens corresponding

<ON= position while the welcome

consumption screen, etc.)

to the following items will appear one after

screen is displayed.

Sets and adjusts maintenance

another for several seconds each.

3-61

. The welcome screen can be set to on

notification

or off. For details, refer to <Screen

Also, the multi-function display (color LCD)

Settings= F3-41.

can also be used to set and initialize the

. For a certain period of time after the

multi-function display (color LCD) itself.

welcome screen has once appeared, it

may not appear again even when the

NOTE

driver9s door is opened and closed

. When the vehicle is in motion,

again. This does not indicate a mal-

certain functions and selections may

function.

not be available.

. You can set the language and units

for both the multi-function display

(color LCD) and the combination meter

at the same time. For details about

setting the language and units, refer to

Engine oil: Checks the interval of engine

oil replacement.

<Menu screens= F3-38.

Oil filter: Checks the interval of oil filter

. The images displayed in this Own-

replacement.

er9s Manual are sample images. The

Tires: Checks the interval of tire rotation.

actual image may vary depending on

Inspection and maintenance: Checks the

the market and vehicle specifications.

interval of inspection and maintenance.

When the checks are performed, the color

of the icon corresponding to the checked

3-49

Instruments and controls/Multi-function display (color LCD)

& Basic operation

item will change.

more.

If there is a notification, the message will

S03BP06

be displayed. Take the appropriate actions

& Interruption screen

based on the message indicated.

S03BP19

After the self-check is completed, today9s

date, the stored birthday or the stored

anniversary is displayed.

NOTE

. After performing the maintenance,

change the setting of the correspond-

ing maintenance item. For details, refer

to <Maintenance settings= F3-61.

. The maintenance notification screen

will be displayed under either of the

Control switch

following conditions.

1) INFO button

3 The period of time remaining until

Example

the registered notification date is 15

/SET

Useful messages, such as reminder in-

days or less.

formation, weather information (if

3 The total driving distance remain-

Press the INFO button on the steering

equipped) and traffic information (if

ing until the registered notification

wheel to switch the item displayed on the

equipped) may interrupt the current screen

distance is approximately 311 miles

basic screen. You can operate the items

and appear on the display accompanied

(500 km) or less.

on the setting screen by using the < =,

by a beep. Take proper action according to

. The maintenance notification screen

< = and < /SET= switches.

the message.

will be displayed until either of the

following conditions is satisfied.

The interruption screen will return to the

3 The period of time passed after

original screen after a few seconds. Also,

the registered notification date is 15

you can press the INFO button to skip the

days or more.

interruption screen.

3 The total distance driven after the

registered notification distance is

approximately 311 miles (500 km) or

3 CONTINUED 3

3-50

Instruments and controls/Multi-function display (color LCD)

& Basic screens

is in the <ACC= position.

! Climate control screen

S03BP1017

S03BP10

The climate control status is displayed on

While the ignition switch is in the <ACC= or

the multi-function display (color LCD).

<ON= position, the basic screen will be

displayed.

! Outside temperature indicator

S03BP1016

The outside temperature is displayed on

the multi-function display (color LCD).

NOTE

. The outside temperature indicator

shows the temperature around the

sensor. Therefore, the temperature in-

dication may differ from the actual

outside air temperature.

. The temperature unit cannot be

Climate control screen

changed.

1) Set temperature indicator (left-hand side)

2) FULL AUTO indicator

3) AUTO indicator

4) Airflow mode indicator

5) Set temperature indicator (right-hand

side)* 1

6) Air inlet selection indicator

7) SYNC indicator* 1

8) Fan speed indicator

9) Air conditioner ON indicator

*1: Models with the SYNC function only

1) Clock

2) Climate control*

3) Outside temperature

When operating the climate control sys-

4) Information screen

tem, the basic screen switches to the

*: This is not displayed on the multi-function

climate control screen. For details about

display (color LCD) when the ignition switch

3-51

Instruments and controls/Multi-function display (color LCD)

climate control operation, refer to <Climate

control panel= F4-2.

! Clock

S03BP1018

The clock can be displayed in either 12-

hour display or 24-hour display. For details

about the setting, refer to<Clock= F3-62.

3 CONTINUED 3

$3-52Instruments and controls/Multi-function display (color LCD)! Information screenS03BP1019Press the INFO button on the steering wheel to switch the item displayed on the information components operating status screenDisplays the operating status of the electric components and equipment.3-53Prevention safety screenDisplays the status of your vehicle.3-53EyeSight screen* 1Displays the operating status of EyeSight.3-54Favorite screenDisplays up to 3 optional items.3-542Weather information screen*Displays weather information.3-55Traffic information* 2 /Navigation* 3 screenDisplays information linked with the navigation system.3-55Audio screenDisplays audio system information.3-56Fuel consumption screenDisplays fuel consumption information.3-56Clock screenDisplays the clock.3-56Guidance screenMoves to the setting screen.3-57*1: Models with EyeSight system*2: Models with SiriusXM Satellite Radio*3: Models with navigation system$

3-52

Instruments and controls/Multi-function display (color LCD)

! Information screen

S03BP1019

Press the INFO button on the steering wheel to switch the item displayed on the information screen.

Content

Description

Page

Electric components operating status screen

Displays the operating status of the electric components and equipment.

3-53

Prevention safety screen

Displays the status of your vehicle.

3-53

EyeSight screen* 1

Displays the operating status of EyeSight.

3-54

Favorite screen

Displays up to 3 optional items.

3-54

Weather information screen*

Displays weather information.

3-55

Traffic information* 2 /Navigation* 3 screen

Displays information linked with the navigation system.

3-55

Audio screen

Displays audio system information.

3-56

Fuel consumption screen

Displays fuel consumption information.

3-56

Clock screen

Displays the clock.

3-56

Guidance screen

Moves to the setting screen.

3-57

*1: Models with EyeSight system

*2: Models with SiriusXM Satellite Radio

*3: Models with navigation system

3-53

Instruments and controls/Multi-function display (color LCD)

NOTE

! Electric components operation

! Prevention safety screen

screen

. Indicators do not display for func-

S03BP101902

tions that are not equipped to the

S03BP101901

vehicle.

. The indicators of functions that are

not operating are displayed in grey.

. For models with auto on/off head-

lights; If the multi-function display

(color LCD) unit, battery, or fuse is

removed, the Auto on/off headlights

indicator turns off on the multi-function

display (color LCD). After reinstalling

the removed multi-function display

(color LCD) unit, battery, or fuse to the

vehicle, the Auto on/off headlights

Telltale screen

indicator will appear once more if the

Lane Departure/Sway Warning indica-

Steering angle

light control switch is turned to the

tor* 1

Vehicle posture

<AUTO= position.

2) Pre-Collision Braking System indicator* 1

Running condition

. The exterior lights indicators on the

3) Stop lights

This screen displays the driving status of

4) Reverse Automatic Braking (RAB)* 1

screen do not notify the driver when the

the vehicle and the operation status func-

5) BSD/RCTA* 1

bulbs burn out. The indicators on the

tions. For functions that are operating, the

6) Headlights* 2

screen still illuminate.

indicator will illuminate or flash.

7) Front fog lights* 2

8) Turn signals

NOTE

9) Auto on/off headlights* 1

. The vehicle posture indication may

*1: If equipped

differ from the actual vehicle posture.

*2: The daytime running lights are not dis-

played.

. When X-mode has turned on, the

screen of the multi-function display is

switched to the prevention safety

This screen displays the electric compo-

screen.

nents operation status of the vehicle.

3 CONTINUED 3

3-54

Instruments and controls/Multi-function display (color LCD)

! EyeSight screen (models with

! Favorite screen

Item

Details

EyeSight system)

S03BP101904

S03BP101903

The engine coolant temperature is

displayed.

The engine oil temperature is

displayed.

The average vehicle speed is

displayed.

Favorite screen (display example)

The accelerator opening ratio is

displayed.

Lead vehicle indicator

This screen displays up to three optional

Your own vehicle indicator

pieces of information that can be selected

Stop lights

from the following items.

Road line indicator

The vehicle posture is displayed.

Lane indicator

This screen displays the status of the

EyeSight system. The lead vehicle indica-

The current rate of fuel consump-

tor moves forward and backward depend-

tion is displayed.

ing on the distance with the vehicle in front.

For details, refer to the Owner9s Manual

supplement for the EyeSight system.

The direction of the vehicle is

displayed.* 1

The weather information is dis-

played.* 2

3-55

Instruments and controls/Multi-function display (color LCD)

satellite radio subscription.

Item

Details

! Weather information screen (if

. The weather forecast for the set

equipped)

The posted speed limit of the road

destination remains displayed until a

S03BP101905

you are currently driving on is

new destination is set or until you reach

displayed.* 1

the destination.

. Depending on the reception timing

of XM, the display of weather informa-

The calender is displayed.

tion may be delayed.

! Navigation screen (models with

navigation system)

Nothing is displayed.

S03BP101906

*1: If equipped

*2: Models with SiriusXM Satellite Radio

NOTE

Weather information for the destination.*

Weather information for the current loca-

Some displayed items may be not

tion.

displayed depending on the model

*: Only when a destination is set in the

and specifications.

navigation system

The items shown in the favorite screen can

be changed. For details, refer to <Favorite

The weather information is displayed on

setting= F3-60.

the screen.

NOTE

The navigation system information to the

destination is displayed on the screen.

. When all of the following conditions

are satisfied, weather information is

NOTE

displayed.

When a destination is not set in the

3 The vehicle is equipped with an

navigation system, the compass orien-

audio and navigation system for

tation, name, route sign and speed limit

SiriusXM satellite radio.

of the road the vehicle is traveling on

3 You have a current SiriusXM

3 CONTINUED 3

3-56

Instruments and controls/Multi-function display (color LCD)

remain displayed on the screen.

! Fuel consumption screen

! Clock/date screen

S03BP101908

S03BP101909

! Audio screen

S03BP101907

Driving range on remaining fuel

The time and date are displayed.

Average fuel consumption corresponding

You can adjust the time and date. For

The screen of the currently selected audio

to the driving distance of each trip meter

details, refer to <Clock= F3-62.

source is displayed.

Current fuel consumption

For details about how to use the audio set,

The fuel consumption information is dis-

refer to the separate navigation/audio

played on the screen.

Owner9s Manual.

NOTE

The driving range on remaining fuel is

only a guide. The indicated value may

differ from the actual driving range on

remaining fuel, so you must immedi-

ately fill the tank when the low fuel

warning light illuminates.

3-57

Instruments and controls/Multi-function display (color LCD)

NOTE

& Setting screen

! Guidance screen

S03BP28

S03BP101910

1. Press and hold the INFO button on the

guidance screen. The top menu is dis-

played.

2. Operate the < = or < = switch to

select the preferred menu from the top

menu.

3. Pull the < /SET= switch to enter the

selected menu.

4. Operate the < = or < = switch to

select the preferred menu from the 2nd

menu.

5. Pull the < /SET= switch to enter the

selected menu.

When the INFO button on the steering

wheel is pressed and held on this screen,

When the combination meter display

the setting screen can be displayed.

(color LCD) is displaying the menu

For details, refer to <Setting screen= F3-

screen entering screen, the system will

57.

not move to the setting screen even if

the INFO button is pressed and held.

3 CONTINUED 3

3-58

Instruments and controls/Multi-function display (color LCD)

The menu list is as follows.

Top menu

2nd menu

Description

Page

Time/Date

Time/Date*

Set and adjust the time and date. 12h or 24h format can be selected.

3-59

Birthday

Set a birthday.

3-59

Anniversary

Set an anniversary day.

3-59

Go Back

Return to the 1st menu.

Display/Beep

Screen Off*

Turn the screen on or off.

Yes or No

3-59

Favorite

Set and customize the triple meter.

3-60

Bypass Screen

Set the bypass screen for each item.

On or Off

3-60

Beep

Adjust the beep sound volume.

High, Low or Off

3-60

Go Back

Return to the 1st menu.

Maintenance

Engine Oil

Set and adjust the oil maintenance notification date.

3-61

Oil Filter

Set and adjust the oil filter maintenance notification date.

3-61

Tires

Set and adjust the tire maintenance notification date.

3-61

Maintenance Schedule

Set and adjust the vehicle maintenance notification date.

3-61

Turn on or off the self-check screen that is

ON/OFF

activated when the ignition switch is turned to the On or Off

3-61

<ON= position.

Clear All Settings

Clear all settings for maintenance items.

Yes or No

3-61

Go Back

Return to the 1st menu.

Initialize

Reset all settings to the default settings.

Yes or No

3-62

Go Back

Return to the setting screen.

*: You can also set this while driving.

3-59

Instruments and controls/Multi-function display (color LCD)

NOTE

want to register.

! Date and time settings

S03BP2801

You can store a maximum of 5 anniver-

You can set the date, time and 12h or 24h

saries.

format settings.

! Display/Beep settings

! Current date and time setting

S03BP2805

S03BP280101

You can set the display settings and

For details about clock setting, refer to

volume settings.

<Clock= F3-62.

! Screen OFF setting

! Birthday setting

S03BP280501

S03BP280102

If a birthday or anniversary is approaching,

1. Select <Screen Off= from the 2nd menu

a message will be displayed when the

in setting screen. Refer to <Setting screen=

ignition switch is turned to the <ON=

F3-57.

position. This function can be set to on or

off. For details, refer to <Bypass screen

setting= F3-60.

3. Enter the date and the text by using the

1. Select <Birthday= from the 2nd menu in

control switches.

the setting screen. Refer to <Setting

4. Select <Set= to exit settings. Select <Go

screen= F3-57.

Back= to return to the previous screen

without applying the setting changes.

NOTE

You can store a maximum of 5 birth-

days.

! Anniversary setting

2. Select <Yes= to turn off the screen.

S03BP280103

1. The procedure for setting an anniver-

Select <No= to return to the previous

sary is the same as <Birthday setting= F3-

screen.

59, except that in step 1 <Anniversary= is

selected.

Restoring the screen

When the INFO button is operated after

2. Select from the list the number that you

the ignition switch is turned to the <ON= or

3 CONTINUED 3

3-60

Instruments and controls/Multi-function display (color LCD)

<ACC= position, the screen will be restored.

Back= to return to the previous screen

3. Select <Set= to exit settings. Select <Go

The screen will be restored with the basic

without applying the setting changes.

Back= to return to the previous screen

screen that was displayed when the

without applying the setting changes.

NOTE

screen was turned off.

. You can display a maximum of the 3

NOTE

items.

Traffic information setting is only dis-

While the screen is off, the screen

. The same item cannot be selected

played for the audio unit with SiriusXM

switches to the climate control screen

for the left, center or right location.

satellite radio.

only when the climate control system is

. Weather information for 3 hours

operated.

later or 6 hours later can be displayed.

! Beep setting

S03BP280504

! Favorite setting

1. Select <Beep= from the 2nd menu in the

! Bypass screen setting

S03BP280502

setting screen. Refer to <Setting screen=

1. Select the <Favorite= from the 2nd

S03BP280503

1. Select <Bypass Screen= from the 2nd

menu in setting screen. Refer to <Setting

F3-57.

menu in the setting screen. Refer to

screen= F3-57.

<Setting screen= F3-57.

2. Set the beep volume by using the

control switches.

2. Set the desired items by using the

2. Select <On= or <Off= to turn the display

3. Select <Set= to exit settings. Select <Go

control switches. For details about items,

of items on or off by using the control

Back= to return to the previous screen

refer to <Favorite screen= F3-54.

switches.

without applying the setting changes.

3. Select <Set= to exit settings. Select <Go

3-61

Instruments and controls/Multi-function display (color LCD)

NOTE

! Maintenance settings

! On/Off setting

. The reminder will be displayed by

S03BP2803

S03BP280305

You can set maintenance reminders.

1. Select <On/Off= from the 2nd menu on

either date or distance in accordance

the setting screen. Refer to <Setting

! Engine oil setting

with the setting.

screen= F3-57.

S03BP280301

. Even when either <Day= or <Dis-

1. Select <Engine Oil= from the 2nd menu

tance= are displayed as <_ _= a pop-up

in the setting screen. Refer to <Setting

screen will appear.

screen= F3-57.

. The reminder will be displayed until

either of the following conditions is

satisfied.

3 The period of time passed after

the registered notification date is 15

days or more.

3 The total distance driven after the

registered notification distance is

approximately 311 miles (500 km) or

more.

2. Select <On= or <Off= to turn the opening

! Oil filter setting

screen on or off by using the control

S03BP280302

The setting procedure is the same as

switches.

<Engine oil setting= F3-61, but select the

2. Set the date and distance of the

3. Select <Set= to exit settings. Select <Go

<Oil Filter= item in step 1.

reminder by using the control switches.

Back= to return to the previous screen

3. Select <Set= to exit settings. Select

! Tires setting

without applying the setting changes.

<Update= to change the notification dis-

S03BP280303

The setting procedure is the same as

tance to the default value. Select <Go

<Engine oil setting= F3-61, but select the

! Clear setting

Back= to return to the previous screen

<Tires= item in step 1.

S03BP280306

1. Select <Clear All Settings= from the 2nd

without applying the setting changes.

menu on the setting screen. Refer to

! Maintenance schedule setting

<Setting screen= F3-57.

S03BP280304

The setting procedure is the same as

<Engine oil setting= F3-61, but select the

<Maintenance Schedule= item in step 1.

3 CONTINUED 3

3-62

Instruments and controls/Clock

Clock

S03AF

For models with a SUBARU genuine

navigation and/or audio system, the clock

can be adjusted using either <Auto= mode

or <Manual= mode.

. Auto mode: automatic clock adjustment

. Manual mode: manual clock adjust-

ment

2. Select <Yes= or <No= by using the

control switches.

! Initialize

& How to get the source code

S03BP2804

using the open source

You can initialize the items that have been

set to your preference.

S03BP29

Free/Open Source Software Information

1. Select <Initialize= from the 2nd menu on

This product contains Free/Open Source

the setting screen. Refer to <Setting

Software (FOSS).

screen= F3-57.

The license information and/or the source

code of such FOSS can be found at the

following URL.

source/ivi/subaru/

Instruments and controls -> Multi-function display (color LCD) (if equipped) for Your Subaru XV SUV Second Generation (2017-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals