Get Inspection and Maintenance -> Periodic Maintenance Schedule - Alto K-10 Guide for Suzuki Alto 4 Door Sixth Generation (2004-2008)

76G-74E

A....Adjust. I....Inspect and correct or replace if necessary.

T....Tighten to specified torque. C....Clean.

R....Replace or change. O....Rotate

L....Lubricate.

Note:

This table includes services as scheduled up to 80,000 km mileage. Beyond 80,000 km, carry out the same services at the same intervals respectively.

INSPECTION AND MAINTENANCE

9-6

ALTO K10

76G-74E

INSPECTION AND MAINTENANCE

9-7

76G-74E

INSPECTION AND MAINTENANCE

9-8

76G-74E

w WARNING

The rear shock absorbers are filled with

high pressure gas. Never attempt to

disassemble it or throw it into a fire.

Avoid storing it near a heater or heating

device. When scrapping the absorber,

the gas must be released from the

absorber safely. Ask your dealer for

assistance.

• All maintenance should be carried out with

the ignition switch in the “OFF” position

and the car parked securely on the level

ground unless otherwise specified.

• If you are in any way unsure of your

ability to undertake a task, then do not

start it but contact your MARUTI SUZUKI

dealer to perform the work for you.

w WARNING

INSPECTION AND MAINTENANCE

9-9

Inspection and Maintenance -> Periodic Maintenance Schedule - Alto K-10 for Your Suzuki Alto 4 Door Sixth Generation (2004-2008)