Get Operating Your Vehicle -> Rearview Camera (if equipped) Guide for Suzuki Baleno 4 Door Second Generation (2015-2021)

3-26

OPERATING YOUR VEHICLE

Warning and Indicator Messages

Vehicle without the information display symbol

If there is a problem or warning regarding the parking sensor system, a buzzer and the

status of the indicator on the parking sensor switch inform it. Follow its instruction.

• The buzzer sounds intermittently. The indicated sensor is contaminated. Wipe it clean

with a soft cloth. If the buzzer does not stop after wiping, there may be problem with the

parking sensor system. Have your vehicle inspected by an authorised Maruti Suzuki

workshop.

• The indicator does not come on when the parking sensor switch is pressed. The indica-

tor goes off while operating. There may be a problem with the parking sensor system,

Have your vehicle inspected by an authorised Maruti Suzuki workshop.

Vehicle with the information display symbol

If there is a problem or warning regarding the parking sensor system, a message is dis-

played on the information display in the instrument cluster, and a symbol blinks and the

buzzer sounds. If a message is displayed, follow its instruction.

Message Symbol Buzzer Probable cause and remedy

Two blinking

lines in a sensor

location.

Series of

double beeps

There may be a problem with the

parking sensor system.

Have your vehicle inspected by an

authorised Maruti Suzuki work-

shop.

One blinking line

in a sensor loca-

tion.

Series of sin-

gle beeps

The indicated sensor is contami-

nated.

Wipe it clean with a soft cloth.

Rearview Camera

(if equipped)

When the gearshift lever is shifted to the

“R” position while the ignition mode is

“ON”, the rearview camera system auto-

matically shows the view behind the vehi-

cle on the display.

WARNING

The distance viewed in the rearview

camera may differ from the actual

distance according to the condition

of road or the load the vehicle is car-

rying. Since the camera display area

is also limited, backing up by only

looking at the display may cause an

accident or a collision with an object.

The rearview camera cannot replace

the driver’s attention. The driver

alone is responsible for parking and

similar driving maneuvers.

• Use the rearview camera only to

provide driving assistance.

• Always drive carefully confirming

the safety of the rear and the sur-

rounding conditions by looking

directly with your eyes and using

the rear view mirror.

• Make sure that the tailgate is

securely closed when backing up.

3-27

OPERATING YOUR VEHICLE

Rearview Camera Location

68PH00315

(1) Rearview camera

The rearview camera is installed beside

the license plate light.

NOTE:

If body wax does get on the camera lens,

wipe off the wax with a clean cloth damp-

ened with mild detergent diluted with

water, then wipe with a dry cloth.

How to Use Rearview Camera

1) Press the engine switch to change the

ignition mode to “ON”.

2) Shift the gearshift lever in the “R” posi-

tion.

• The display automatically shows the

view behind the vehicle.

• When the gearshift lever is shifted

from “R” to another gearshift lever

position, the display returns to the

previous display.

NOTE:

The rearview camera display has first pri-

ority in any display mode. However, the

rearview camera display does not show

the rear view while the system is initializ-

ing.

Display Range of Rearview Camera

The rearview camera display shows the

area behind the rear end of the tailgate.

The display cannot show objects which are

close to the bumper or under the bumper.

The rearview camera display cannot show

obstacles which are higher than the cam-

era. Upper parts of tall objects such as

road signs cannot be viewed on the dis-

play.

NOTICE

If you use the rearview camera for a

long time when the ignition mode is

“ON”, but the engine is not running,

the battery may discharge.

Do not leave the ignition mode “ON”

for a long time when the engine is not

running.

(1)

EXAMPLE

NOTICE

The rearview camera is a precision

instrument. If you strike the camera,

it may be broken and cause damage

resulting in a catching fire or a mal-

function.

• Do not strike the camera.

• Do not remove snow or mud on the

camera lens with a stick.

NOTICE

If water enters the rearview camera, it

may cause a malfunction or catching

fire.

Do not use high pressure water

around the camera.

NOTICE

This lens is hard coated to prevent

damage or discoloration. Damage or

discoloration of lens may obscure

the image.

• Do not use a brush to clean lens.

• Do not use alcohol, benzene or

thinner to clean the lens.

• Do not use wax on the camera lens.

3-28

OPERATING YOUR VEHICLE

Example of display range of rearview

camera

68PH00316

68PH00317

(1) Display range

NOTE:

• Images shown on the display from the

rearview camera are reversed images

(mirror images).

• The colors of objects on the rearview

camera may differ from the actual object

colors.

• The rearview camera display may be dif-

ficult to see under the following condi-

tions, but this is not a system

malfunction.

– In dark areas, on a rainy day or at

night.

– When the temperature around the lens

is too high/low, or the camera is wet

such as on a rainy day or during peri-

ods of high humidity (dew condensa-

tion may occur on the camera lens).

– When a foreign object such as mud or

a drop of water is stuck around the

camera lens.

– When strong light directly enters the

camera (vertical lines may be seen on

the display).

– Under fluorescent light. (The display

may flicker.)

– When the outside temperature is low

(the image on the display may be

darkened).

Example of rearview camera screen

indication

The distance viewed in the rearview

camerdiffer from the actual distance

according to the condition of the road or

the load the vehicle is carrying.

Uphill incline behind the vehicle

68PH00318

(1) Object

(2) Actual distance

(3) Distance on the display

When there is an uphill incline behind the

vehicle, the object shown on the display

appears farther away than the actual dis-

tance.

Downhill incline behind the vehicle

68PH00319

(1) Object

(2) Actual distance

(3) Distance on the display

When there is a downhill incline behind the

vehicle, the object shown on the display

appears closer than the actual distance.

(1)

EXAMPLE

(1)

EXAMPLE

(1)

(2)

(3)

EXAMPLE

(1)

(3)

(2)

EXAMPLE

3-29

OPERATING YOUR VEHICLE

If the rear view from the rearview cam-

era is not shown or there is a poor

image

• If the rear view from the rearview camera

is not shown.

– Check to make sure that the ignition

mode is “ON”.

– Check to make sure that the gearshift

lever is shifted to the “R” position.

• If the image from the rearview camera is

poor.

– Check to make sure that the camera

lens is not dirty.

– Check to make sure that light from the

sun or the beam of the headlights from

the vehicle behind is not shining

directly into the lens.

If the rearview camera system is still not

working properly after checking the above,

have the system inspected by an autho-

rised Maruti Suzuki workshop as soon as

possible.

Braking

60G165S

The distance needed to bring any vehicle

to a halt increases with the speed of the

vehicle. The braking distance needed, for

example, at 60 km/h (37 mph) will be

approximately 4 times greater than the

braking distance needed at 30 km/h (19

mph). Start to brake the vehicle when there

is plenty of distance between your vehicle

and the stopping point, and slow down

gradually.

Power-Assisted Brakes

Your vehicle has power-assisted brakes. If

power assistance is lost due to a stalled

engine or other failures, the system is still

fully operational on reserve power and you

can bring the vehicle to a complete stop by

pressing the brake pedal once and holding

it down. The reserve power is partly used

up when you depress the brake pedal and

reduces each time the pedal is pressed.

Apply smooth and even pressure to the

pedal. Do not pump the pedal.

EXAMPLE

WARNING

If water gets into the brake devices,

brake performance may become poor

and unpredictable. After driving

through water or washing the under-

side of the vehicle, test the brakes

while driving at a slow speed to see if

they have maintained their normal

effectiveness. If the brakes are less

effective than normal, dry them by

repeatedly applying the brakes while

driving slowly until the brakes have

regained their normal effectiveness.

WARNING

Even without reserve power in the

brake system, you can still stop the

vehicle by pressing the brake pedal

harder than normally required. How-

ever, the stopping distance may be

longer.

Operating Your Vehicle -> Rearview Camera (if equipped) for Your Suzuki Baleno 4 Door Second Generation (2015-2021)

Related Topics

Popular Owner Manuals

Latest Owner Manuals