5-2
OTHER CONTROLS AND EQUIPMENT
To reinstall the fuel filler cap:
1) Turn the cap clockwise until you hear
several clicks.
2) Close the fuel filler door.
Engine hood
66RH051
To open the engine hood:
1) Pull the hood release handle located on
the outboard side of the driver’s side.
This will disengage the engine hood
lock halfway.
66RH148
2) Push the under-hood release lever
sideways with your finger, as shown in
the illustration. While pushing the lever,
lift up the engine hood.
WARNING
Fuel is extremely flammable. Do not
smoke when refueling, and check
that there are no open flames or
sparks in the area.
WARNING
If you need to replace the fuel cap,
use a genuine MARUTI SUZUKI cap.
Use of an improper cap can result in
a malfunction of the fuel system or
emission control system. It may also
result in fuel leakage in the event of
an accident.
CAUTION
The release lever can be hot enough
to burn your finger right after driving.
Touch the lever after it becomes cool
enough.
NOTICE
Check that the wiper arms are not
raised before you lift up the engine
hood to avoid damaging the wiper
arms and the engine hood.
English 
