Get Other Controls and Equipment -> Manual heating and air conditioning system Guide for Suzuki Ignis SUV First Generation (2000-2008)

5-15

OTHER CONTROLS AND EQUIPMENT

Center outlet

66RH123

Move the knob (1) horizontally or the case

(2) vertically to adjust the direction of air-

flow as desired.

CAUTION

Prolonged exposure to hot air from

the heater or air conditioner could

result in low temperature burns. All

vehicle occupants, particularly chil-

dren, the elderly, those with special

needs, individuals with delicate skin,

and sleeping individuals, should

maintain sufficient distance from the

air outlets to prevent prolonged

exposure to hot airflow.

(1) (2)

EXAMPLE

Manual heating and air conditioning system

Description of controls

75RM060

Temperature selector (1)

This is used to select the temperature by turning the selector.

Blower speed selector (2)

This is used to turn on the blower and to select blower speed by turning the selector.

(3) (1)(4)

(2) (5)

EXAMPLE

5-16

OTHER CONTROLS AND EQUIPMENT

Air flow selector (3)

75RM022

This is used to select one of the following

functions.

VENTILATION (a)

66RH132

Temperature-controlled air comes out of

the center and side air outlets.

BI-LEVEL (b)

66RH133

Temperature-controlled air comes out of

the floor outlets and cooler air comes out

of the center and side outlets. When the

temperature selector (1) is in the fully cold

position or fully hot position, however, the

air from the floor outlets and the air from

the center and side outlets will be the

same temperature.

HEAT (c)

66RH134

Temperature-controlled air comes out of

the floor outlets and the side outlets, also

comes out of the windshield defroster out-

lets and also comes slightly out of the side

defroster outlets.

HEAT & DEFROST (d)

66RH135

Temperature-controlled air comes out of

the floor outlets, the windshield defroster

outlets, the side defroster outlets and the

side outlets.

DEFROST (e)

66RH136

Temperature-controlled air comes out of

the windshield defroster outlets, the side

defroster outlets and the side outlets.

(a)

(b)

(e)

(d)

(c)

EXAMPLE

5-17

OTHER CONTROLS AND EQUIPMENT

Air intake selector (4)

75RM059

This selector is used to select the following

modes.

FRESH AIR (f)

When this mode is selected by moving the

lever to right, outside air is used.

RECIRCULATED AIR (g)

When this mode is selected by moving the

lever to left, outside air is shut out and

inside air is recirculated. This mode is suit-

able when driving through dusty or polluted

air such as in a tunnel, or when attempting

to quickly cool down the interior.

NOTE:

If you select RECIRCULATED AIR for an

extended period of time, the air in the vehi-

cle can become contaminated. Therefore,

you should occasionally select FRESH

AIR.

Air conditioning switch (5)

To turn on the air conditioning system, set

the blower speed selector to a position

other than off and push in “A/C” switch (5).

With this “A/C” switch operation, a indica-

tor light will come on when the air condi-

tioning system is on. To turn off the air

conditioning system, push “A/C” switch

again.

During operation of the air conditioner, you

may notice slight changes in engine

speed. These changes are normal, the

system is designed so that the compressor

turns on or off to maintain the desired tem-

perature.

Less operation of the compressor results

in better fuel economy.

System operating instructions

Natural ventilation

Select VENTILATION and FRESH AIR, the

temperature selector to the desired tem-

perature position, and the blower speed

selector to off. Fresh air will flow through

the vehicle during driving.

Forced ventilation

The control settings are the same as for

natural ventilation except you set the

blower speed selector to a position other

than off.

Normal heating (using outside air)

Select HEAT and FRESH AIR, the tem-

perature selector to the desired tempera-

ture position and the blower speed selector

to the desired blower speed position. Set-

ting the blower speed selector to a higher

blower speed position increases heating

efficiency.

Quick heating (using recirculated air)

The control settings are the same as for

normal heating except you select RECIR-

CULATED AIR. If you use this heating

method for an extended period of time, the

air in the vehicle can become contami-

nated and the windows can become misty.

Therefore, use this method only for quick

heating and change to the normal heating

method as soon as possible.

(g) (f)

EXAMPLE

5-18

OTHER CONTROLS AND EQUIPMENT

Head cooled/Feet warmed heating

Select BI-LEVEL and FRESH AIR, the

temperature selector to the desired tem-

perature position, and the blower speed

selector to the desired blower speed posi-

tion. Unless the temperature selector is in

the fully cold position or fully hot position,

the air that comes out of the center and

side outlets will be cooler than the air that

comes out of the floor outlets.

Normal cooling

Set the air flow selector to VENTILATION,

the temperature selector to the desired tem-

perature position and the blower speed

selector to the desired blower speed posi-

tion, and turn on “A/C” switch. Setting the

blower speed selector to a higher blower

speed position increases cooling efficiency.

You can switch the air intake selector to

either FRESH AIR or RECIRCULATED

AIR as you desire. Choosing RECIRCU-

LATED AIR increases cooling efficiency.

Quick cooling (using recirculated air)

The control settings are the same as for

normal cooling except you select RECIR-

CULATED AIR and the highest blower

speed.

NOTE:

• If you select RECIRCULATED AIR for an

extended period of time, the air in the

vehicle can become contaminated.

Therefore, you should occasionally

select FRESH AIR.

• If your vehicle has been left in the sun

with the windows closed, it will cool

faster if you open the windows briefly

while you operate the air conditioner with

the air intake selector at FRESH AIR and

the blower at high speed.

Dehumidifying

Set the air flow selector to a desired air

flow selector position, the temperature

selector to the desired temperature posi-

tion and the blower speed selector to the

desired blower speed position. Also select

FRESH AIR and turn on “A/C” switch.

NOTE:

Because the air conditioner dehumidifies

the air, turning it on will help keep the win-

dows clear, even when blowing heated air

using DEFROST or HEAT & DEFROST

functions.

66RH137

NOTE:

If you need maximum defrosting:

• select DEFROST and FRESH AIR,

• set the blower speed selector to high,

• adjust the temperature selector to the

hot end,

• turn on “A/C” switch, and

• adjust the side outlets so the air blows

on the side windows.

EXAMPLE

Other Controls and Equipment -> Manual heating and air conditioning system for Your Suzuki Ignis SUV First Generation (2000-2008)

Related Topics

Popular Owner Manuals

Latest Owner Manuals