Get BEFORE DRIVING -> Information display (Type B) Guide for Suzuki Jimny SUV Fourth Generation (2018-2026)

To switch to the setting mode

1) Push and hold the information switch

(1) when the vehicle is stationary.

2) After the display of setting mode is

shown, select the setting item that you

want to change by turning the indicator

selector knob (2) left or right. Refer to

"Setting mode" in this section for

details.

NOTE:

If you switch to the setting mode while

either of the following items is shown on

the information display, the current value

will be reset. If you do not want to reset its

value, push the indicator selector knob (2)

quickly beforehand and switch to the other

item.

Average fuel consumption

• Driving time

• Average speed

To exit the setting mode

1) To exit the setting mode, select "Back"

and push the indicator selector knob

(2).

2) Push the information switch (1) quickly.

NOTE:

You can exit the setting mode by either of

the following operations:

Tum the ignition switch to ';,'\CC" or

"LOCK" position.

• Start driving your vehicle.

Information display

The information display is shown when the

ignition switch is in "ON" position.

(A) (B)

(C)

(

D) (E)

(F)

(G)

(1) Information display

(1)

78RB02033

BEFORE DRIVING

78RB02039

(2) Trip meter selector knob

(3) Indicator selector knob

The information display shows the follow-

ing information.

Display (A)

Clock

Display (B)

Thermometer

Display (C)

Warning and indicator messages I Fuel

consumption / Driving range / Average

speed / Driving time

Display (D)

Selector position (for Automatic transmis-

sion models)/ Gear position (for Automatic

transmission models) / Gearshift indicator

(if equipped)

2-28

BEFORE DRIVING

Display (E)

Trip meter I Rear passenger's seat belt

reminder (if equipped)

Display (F)

Odometer

Display (G)

Fuel gauge

52RS20420

When the ignition switch is turned "ON",

the message shown in the above illustra-

tion will appear on the display for several

seconds.

Some warning and indicator messages

may appear on the display when the igni-

tion switch is in "ACC" or "LOCK".

2-29

Clock

When the ignition switch is in "ON", the dis-

play (A) shows the time.

To set the clock, follow "Setting mode"

instructions in this section.

,A WARNING

If you attempt to adjust the display

while driving, you could lose control

of the vehicle.

Do not attempt to adjust the display

while driving.

Thermometer

When the ignition switch is "ON", the dis-

play (B) shows the thermometer.

The thermometer indicates the outside

temperature.

-3°c

78RB02040

If the outside temperature nears freezing

condition, the mark (a) will appear on the

display.

NOTE:

The outside temperature indication is not

the actual outside temperature when

driving at low speed, or when stopped.

If there is something wrong with the ther-

mometer, or just after the ignition switch

is turned "ON", the display may not indi-

cate the outside temperature.

When the display (C) shows the driving

range, you can change the unit of tem-

perature.

To change the unit of temperature, refer to

"Setting mode" in this section.

25°(

77 °F

(Initial

setting)

52RM20880

Fuel consumption/ Driving range/ Average speed / Driving time

When there are no warning or indicator messages on the display (C), you can select one

of the following indications to appear on the display: instantaneous fuel consumption,

average fuel consumption, driving range, average speed, driving time or no indication.

(a)

Instant fuel

economy

km/L

0 __ 2~uo

t-

(f)

..

(b)

(e)

Average fue!

economy

50.0

km/L

Or,vmg t1rne

03:19:21

(c)

(d)

Range

383

Average

speed

43

>m

km/h

78RB02041

BEFORE DRIVING

(a) Instantaneous fuel consumption

(b) Average fuel consumption

(c) Driving range

(d) Average speed

(e) Driving time

(f) No indication

To switch the display indication, push the

indicator selector knob (3) quickly.

NOTE:

The value of fuel consumption, driving

range and average speed shown on the

display are affected by the following condi-

tions;

road condiUon

surrounding traffic condition

driving condition

vehicle condition

a malfunction which causes the malfunc-

tion indicator light to come on or blink

2-30

BEFORE DRIVING

Instantaneous fuel consumption

The display shows instantaneous fuel con-

sumption with a bar graph only when the

vehicle is moving.

NOTE:

The display does not show the bar graph

unless the vehicle is moving.

Depending on the vehicle's specification,

the fuel consumption units of initial set-

ting are indicated as U100km, km/L or

MPG (UK).

The indicated maximum value of instan-

taneous fuel consumption is one of the

followings. No more than the maximum

value will be indicated on the display

even if the actual instantaneous fuel

consumption is higher.

- For U100km setting: 30

- For km/L setting: 50

- For MPG (UK) setting: 80

The indication on the display may be

delayed if fuel consumption is greatly

affected by driving conditions.

The display shows estimated values.

Indications may not be the same as

actual values.

2-31

Average fuel consumption

If you previously selected average fuel

consumption setting, the display shows

average fuel consumption from the last

reset to the present when the ignition

switch is turned "ON".

NOTE:

When you reconnect the terminals to the

lead-acid battery, the value of average fuel

consumption will be shown after driving for

a period of time.

You can select the timing to reset the value

of average fuel consumption by one of the

following three methods;

Reset after refuel: the value of average

fuel consumption will be reset automati-

cally by refueling.

Reset with trip meter A: the value of

average fuel consumption will be reset

automatically by resetting trip meter A.

Reset manually: the value of average

fuel consumption will be reset by push-

ing and holding the indicator selector

knob (3) when the display indicates the

average fuel consumption.

To change the timing to reset the value of

average fuel consumption, refer to "Setting

mode" in this section.

NOTE:

If you add only a small amount of fuel

when you select "Reset after refuel", the

average fuel consumption value may not

be reset.

Driving range

If you selected driving range the last time

you drove the vehicle, the display indicates

"---" for a few seconds and then indicates

the current driving range when the ignition

switch is turned "ON".

The driving range shown in the display is

the approximate distance you can drive

until the fuel gauge indicates "E", based on

current driving conditions.

When the low fuel warning light comes on,

the display "---" will appear.

If the low fuel warning light comes on, fill

the fuel tank immediately regardless of the

value of driving range shown in the display.

When you refuel, the driving range is

updated. However, if you only add a small

amount of fuel, the correct value will not be

displayed.

NOTE:

If you refuel when the ignition switch is

"ON", the driving range may not indicate

the correct value.

When you reconnect the terminals to the

lead-acid battery, the value of driving

range will be shown after driving for a

period of time.

Average speed

If you selected average speed the last time

you drove the vehicle, the display indicates

the last value of average speed from previ-

ous driving when the ignition switch is

turned "ON". Unless you reset the value of

average speed, the display indicates the

value of average speed which includes

average speed during previous driving.

To reset the value of average speed, push

and hold the indicator selector knob (3) for

a while when the display indicates an aver-

age speed. The display shows "---" and

then indicates a new average speed after

driving for a short time.

NOTE:

When you reconnect the terminals to the

lead-acid battery, the value of average

speed will be shown after driving for a

period of time.

Driving time

The display shows the total amount of driv-

ing time since the indication was reset.

To reset the driving time, push and hold

the indicator selector knob (3) for a while

when the display shows the driving time.

NOTE:

When you reset the indication or recon-

nect the terminals to the lead-acid bat-

tery, the driving time will be shown after

driving for a while.

The indicated maximum value of driving

time is 99:59:59. No more than the maxi-

mum value will be indicated on the dis-

play until you reset the driving time.

Gearshift indicator

The display (D) shows the gearshift indica-

tor.

Refer to "Gearshift indicator" in "OPERAT-

ING YOUR VEHICLE" section.

BEFORE DRIVING

Trip meter

The display (E) shows the trip meter.

The trip meter can be used to measure the

distance traveled on short trips or between

fuel stops.

You can use trip meter A or trip meter B

independently.

To reset the trip meter, push and hold the

trip meter selector knob (2) for a while.

NOTE:

The indicated maximum value of the trip

meter is 9999.9. When you run past the

maximum value, the indicated value will

return to 0.0.

Odometer

The display (F) shows the odometer.

The odometer records the total distance

the vehicle has been driven.

NOTICE

Keep track of your odometer reading

and check the maintenance sched-

ule regularly for required services.

Increased wear or damage to certain

parts can result from failure to per-

form required services at the proper

mileage intervals.

2-32

BEFORE DRIVING

Setting mode

When the ignition switch is "ON" and the

vehicle is stationary, you can enter the set-

ting mode of the information display by

pushing and holding the indicator selector

knob (3) for a while.

To select the setting that you want to

change, turn the indicator selector knob

(3) left or right.

To change the setting, push the indicator

selector knob (3).

To exit the setting mode, select "Back"

and push the indicator selector knob (3).

78RB02096

NOTE:

The currently selected setting item is sur-

rounded by a frame.

2-33

NOTE:

If you push and hold the indicator selec-

tor knob (3) to enter the setting mode

when the display (CJ shows average fuel

consumption or average speed, driving

time, the value will be reset simultane-

ously. If you do not want to reset the

value, push the indicator selector knob

quickly to switch the indication of the dis-

play.

If you turn the ignition switch or start to

move the vehicle when the display is in

the setting mode, the setting mode will

be canceled automatically.

Distance unit

(Odometer I trip meter I driving range I

average speed distance unit setting)

You can change the units in which odome-

ter I trip meter I driving range I average

speed distance is displayed.

Fuel economy

(Fuel consumption unit setting)

You can change the units that fuel con-

sumption is displayed in.

Language

You can change the language of the infor-

mation display.

Fuel reset

(Average fuel consumption reset setting)

You can change when the value of aver-

age fuel consumption is reset.

Temperature

(Temperature unit setting)

You can change the units that temperature

is displayed in.

To change the temperature unit, select

"Temperature" in "Setting mode". Then,

select "°C" or "°F".

NOTE:

When you change the units that tempera-

ture is displayed in, the automatic heating

and air conditioning system temperature

display units will be changed automatically.

Clock setting

(Adjusting the clock)

• Adjust the clock by selecting "Clock set-

ting" in "Setting mode". Then, select

"Adjust clock".

To change the hour indication, turn the

indicator selector knob (3) left or right

repeatedly when the hour indication

appears as reversed color. To change

the hour indication quickly, turn and hold

indicator selector knob (3). To set the

hour indication, push the indicator selec-

tor knob (3) and the minute indication

appears as reversed color.

To change the minute indication, turn the

indicator selector knob (3) left or right

repeatedly when the minute indication

appears as reversed color. To change

the minute indication quickly, turn and

hold indicator selector knob (3). To set

the minute indication, push the indicator

selector knob (3).

(Selecting 12H/24H format)

Switch the time indication between 12-

hour and 24-hour format by selecting

"Clock setting" in "Setting mode". Then,

select "12H" or "24H".

Door lock

(Door unlock setting)

You can choose either once or twice oper-

ation(s) to unlock all doors (including the

tailgate) by turning the key or operating the

keyless entry system transmitter.

You can also turn off or on the buzzer

sound when the door(s) is (are) locked or

unlocked.

Lights

(Lane change setting)

The turn signal and its indicator can be set

whether they flash three times even if you

return the turn signal control lever shortly

after operating it.

To change the lane change setting,

select "Lane change" in "Setting mode".

Then, select "ON" or "OFF"

If you want to change the number of

flashing, consult a SUZUKI dealer.

Guide me light setting

(Light setting) (if equipped)

You can change the lighting time of "To

car" function or "To home" function.

Oil change

(Oil life monitoring system reset setting)

(if equipped)

The oil life monitoring system must be

reset after changing the engine oil and oil

filter. To reset the system, push and hold

the indicator selector knob (3) for a while.

TPMS

(Tyre pressure monitoring system set-

ting) (if equipped)

You can check the current tyre pressure

on the information display.

You can set one of the initial values of

tyre pressure below that are indicated on

the tyre information label.

- Comfort Mode

- Load Mode

Refer to "Tyre pressure monitoring system

(TPMS)" in the "OPERATING YOUR VEHI-

CLE" section for details.

Traffic sign recognition

(Traffic sign recognition setting)

(if equipped)

If you select "ON" the traffic sign recogni-

tion function can be activated.

Refer to "Traffic sign recognition" in the

"OPERATING YOUR VEHICLE" section

for details.

BEFORE DRIVING

Default

(Initialization setting)

If you select "YES" and push the indicator

selector knob (3), all settings will be reini-

tialized.

2-34

BEFORE DRIVING -> Information display (Type B) for Your Suzuki Jimny SUV Fourth Generation (2018-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals