2018-2026 Suzuki Jimny SUV BEFORE DRIVING -> Keyless entry system transmitter (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

BEFORE DRIVING -> Keyless entry system transmitter (if equipped) for Your Suzuki Jimny SUV Fourth Generation (2018-2026)

Keyless entry system
transmitter (if equipped)
(2)
79MH0237
(1) LOCK button
(2) UNLOCK button
There are two ways to lock or unlock all
doors (including the tailgate) simultane-
ously by operating the transmitter near the
vehicle.
Central door locking system
To lock all doors, push LOCK button (1)
once.
• To unlock all door, push UNLOCK button
(2) once.
NOTE:
You can switch the function that unlocks all
doors from requiring two pushes to requir-
ing one push, and vice versa, via the infor-
mation display setting mode. For details on
how to use the information display, refer to
"Information display" in this section.
The turn signal lights will flash once when
the doors are locked.
When the doors are unlocked:
The turn signal lights will flash twice.
If the interior light switch is in DOOR
position, the interior light will turn on for
about 15 seconds and then fade out. If
you insert the key into the ignition switch
during this time, the light will start to fade
out immediately.
Check that the doors are locked after you
operate LOCK button (1 ).
NOTE:
If no door is opened within about 30 sec-
onds after UNLOCK button (2) is operated,
the doors will automatically lock again.
BEFORE DRIVING
NOTE:
The maximum operating distance of the
keyless entry system transmitter is about
5 m (16 ft.), but this can vary depending
on the surroundings, especially near
other transmitting devices such as radio
towers or CB (Citizen's Band) radios.
The door locks cannot be operated with
the transmitter, if the ignition key is
inserted in the ignition switch.
When any door is open, the door locks
can only be unlocked with the transmit-
ter, and the turn signal light will flash.
If you lose one of the transmitters, ask a
SUZUKI dealer as soon as possible for a
replacement. Have a SUZUKI dealer
program the new transmitter code in
your vehicle's memory so that the old
code is erased.
NOTICE
The transmitter is a sensitive elec-
tronic instrument. To avoid damaging
the transmitter:
Do not expose it to impacts, mois-
ture or high temperature such as
by leaving it on the dashboard
under direct sunlight.
Keep the transmitter away from
magnetic objects such as a televi-
sion.
2-6
BEFORE DRIVING
Battery replacement
If the transmitter becomes unusable,
replace the battery.
To replace the battery of the transmitter:
(2)
68LM248
1) Remove the screw (1), and open the
transmitter cover.
2) Remove the transmitter (2).
2-7
68LM249
(3) Lithium disc type battery:
CR1616 or equivalent
3) Put the edge of a flat-bladed screw-
driver in the slot of the transmitter (2)
and pry it open.
4) Replace the battery (3) so its+ terminal
faces "+" mark of the transmitter.
5) Close the transmitter and install it into
the transmitter holder.
6) Close the transmitter cover, install and
tighten the screw (1 ).
7) Check that the door locks can be oper-
ated with the transmitter.
8) Dispose of the used battery properly
according to applicable rules or regula-
tions. Do not dispose of lithium batter-
ies with ordinary household trash.
A WARNING
Swallowing a lithium battery may
cause serious internal injury. Do not
allow anyone to swallow a lithium
battery. Keep lithium batteries away
from children and pets. If swallowed,
contact a physician immediately.
NOTICE
• The transmitter is a sensitive elec-
)ron!c instrument. To avoid damag-
ing ,t, do not expose it to dust or
moisture or tamper with internal
parts.
When replacing the battery by
yourself, the transmitter controller
could be damaged affected by
static electricity. Discharge the
static electricity built up in your
body by touching metal before
replacing the battery.
NOTE:
Used batteries must be disposed of prop-
erly according to applicable rules or regu-
lations and must not be disposed of with
ordinary household trash.
80JM133
(1) Crossed-out wheeled bin symbol
The crossed-out wheeled bin symbol (1)
indicates that a used battery should be col-
lected separately from ordinary household
trash.
By ensuring the used battery is disposed
of or recycled correctly, you will help pre-
vent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropri-
ate battery disposal. The recycling of
materials will help to conserve natural
resources. For more detailed information
about disposing of or recycling of the used
battery, consult a SUZUKI dealer.
Theft deterrent alarm system
(if equipped)
A theft deterrent alarm system is armed in
about 20 seconds after you lock the doors.
Keyless entry system - Use the transmit-
ter.
Once the system is armed, any attempt to
open a door by using any other means (')
than the keyless entry system transmitter
or any attempt to open the engine hood will
cause the alarm to be triggered.
• These means include the following:
- The key
- The lock knob on a door
NOTICE
Do not modify or remove the theft
deterrent alarm system. If modified or
removed, the system cannot be prop-
erly operated.
BEFORE DRIVING
NOTE:
The theft deterrent alarm system gener-
ates alarms when any of the predeter-
mined conditions is met. However, the
system does not have any function of
blocking unauthorized entry into your
vehicle.
Always use the keyless entry system
transmitter to unlock the doors when the
theft deterrent alarm system has been
armed. Using a key instead will trigger
the alarm.
If a person who does not know the theft
deterrent alarm system is going to drive
your vehicle, we recommend you explain
the system and its operation to the per-
son, or disable the system beforehand.
Mistakenly triggering the alarm may
cause a nuisance to others.
Even if the theft deterrent alarm system
is armed, you should still be careful to
guard against theft. Do not leave money
or things of value in your vehicle.
The theft deterrent alarm system js
maintenance-free.
2-8

Related Topics

Popular Owner Manuals