2004-2009 Suzuki Swift 4 Door OPERATING YOUR VEHICLE -> Keyless push start system (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

OPERATING YOUR VEHICLE -> Keyless push start system (if equipped) for Your Suzuki Swift 4 Door First generation (2004-2009)

OPERATING YOUR VEHICLE  
• When the engine is off and the position  
lights are on. The illumination will go out  
when the position lights are turned off.  
• When the engine is on and the position  
lights and/or the headlights are on. The  
illumination will go out when the position  
lights and/or the headlights are turned  
off.  
Selection of ignition modes  
Keyless push start system  
(if equipped)  
Press the engine switch to select “ACC” or  
“ON” mode as follows when you use an  
electric accessory or check the operation  
of instruments without running the engine.  
Provided the keyless push start system  
remote controller is within the interior work-  
able area (refer to the related explanation  
in this section), you can use the engine  
switch for starting the engine and selecting  
an ignition mode (“ACC” or “ON”). In addi-  
tion, the following functions can be used:  
1) Bring the keyless push start system  
remote controller with you and sit in the  
driver’s seat.  
2) Manual transaxle – Without depressing  
the clutch pedal, press the engine  
switch (1).  
• Keyless entry function. Refer to “Keyless  
push start system remote controller /  
keyless entry system transmitter (if  
equipped)” in “BEFORE DRIVING” sec-  
tion for details.  
• Locking and unlocking doors (including  
the tailgate) using a request switch.  
Refer to “Keyless push start system  
remote controller / keyless entry system  
transmitter (if equipped)” in “BEFORE  
DRIVING” section for details.  
Automatic transaxle or CVT – Without  
depressing the brake pedal, press the  
engine switch (1).  
82K253  
• Immobilizer (anti-theft) function. Refer to  
“Immobilizer system” in “BEFORE DRIV-  
ING” section for details.  
NOTE:  
To save the lead-acid battery, the illumina-  
tion will be automatically turned off when  
both of the following conditions are simul-  
taneously met:  
Engine switch illumination  
(1)  
• The headlights and position lights are  
turned off.  
• 15 minutes has elapsed since opening  
the driver’s door.  
The engine switch is illuminated (lit) in the  
following situations:  
• When the engine is off and the driver’s  
door is open, or for 15 seconds after the  
driver’s door is closed. The illumination  
will fade out after 15 seconds passed.  
82K254  
3-7  
52RM0-01E  
OPERATING YOUR VEHICLE  
Every time you press the engine switch,  
the ignition mode changes as follows.  
NOTE:  
• Automatic transaxle or CVT – If the  
gearshift lever is in any position other  
than “P”, or if the knob button is pushed  
when the gearshift lever is in “P” position  
the ignition mode cannot be returned to  
“LOCK” (OFF).  
EXAMPLE  
Manual transaxle  
(1)  
• When selecting the ignition modes, the  
information display in the instrument  
cluster shows certain messages. Refer  
to “Information display” in “BEFORE  
DRIVING” section for details.  
(2)  
(Audio equipment)  
(OFF)  
If the master warning indicator light  
blinks and the ignition modes cannot  
be selected  
52RM30020  
1) Without depressing the brake pedal  
and the clutch pedal, push the engine  
switch (1).  
Your keyless push start system remote con-  
troller may not be sensed as being within the  
interior workable area (refer to the related  
explanation in this section). Try again after  
checking that you have the remote controller  
with you. If the ignition modes still cannot be  
selected, the battery of the remote controller  
may be discharged. To select an ignition  
mode, you must then use the following  
method:  
68PH00322  
2) The master warning indicator light in  
the instrument cluster blinks and the  
message “PLACE KEY FOB ON  
START SWITCH” appears in the infor-  
mation display within about 10 sec-  
onds. Touch the engine switch with  
“LOCK” button side of remote controller  
(2) for about 2 seconds.  
Automatic transaxle or CVT  
Gearshift  
lever in  
P
LOCK  
(OFF)  
ACC  
ON  
(Audio equipment)  
Gearshift lever in a  
position other than  
P
57L31006  
3-8  
52RM0-01E  
OPERATING YOUR VEHICLE  
NOTE:  
REMOTE CONTROLLER OUTSIDE  
warning  
• If you still cannot select the ignition  
modes, there may be some problem with  
the keyless push start system. Contact  
an authorized SUZUKI dealer for an  
inspection of the system.  
EXAMPLE  
(2)  
(1)  
When either of the conditions described  
below is met, the system causes  
a
REMOTE CONTROLLER OUTSIDE warn-  
ing by sounding the interior and exterior  
buzzers. At the same time, the immobi-  
lizer/keyless push start system warning  
light comes on and the master warning  
indicator light blinks.  
• The immobilizer/keyless push start sys-  
tem warning light will come on for about  
5 seconds while the master warning indi-  
cator light is blinking. In addition, the  
information display in the instrument  
cluster will show a message during this  
time. Refer to “Information display” in  
“BEFORE DRIVING” section for details.  
• You may customize the system to cause  
the interior buzzer to sound once for  
warning that remote controller is out of  
sensing range. To incorporate this cus-  
tomization, please contact an authorized  
SUZUKI dealer.  
• If the battery of the remote controller is  
becoming discharged, the correspond-  
ing message will appear in the informa-  
tion display when you press the engine  
switch to change the ignition mode to  
“ON”. Refer to “Information display” in  
“BEFORE DRIVING” section for details.  
For details on replacing the battery, refer  
to “Keyless push start system remote  
controller / keyless entry system trans-  
mitter (if equipped)” in “BEFORE DRIV-  
ING” section.  
• Any door is opened and then closed  
while the remote controller is not inside  
the vehicle and the engine is running or  
the ignition mode has been changed to  
“ACC” or “ON” by pressing the engine  
switch.  
• The remote controller is not inside the  
vehicle when you attempt to start the  
engine after changing the ignition mode  
to “ACC” or “ON” by pressing the engine  
switch.  
52RM30230  
(1) Immobilizer/keyless push start sys-  
tem warning light (blinks)  
(2) Master warning indicator light (blinks)  
NOTE:  
• If the warning is given, relocate the  
remote controller as soon as possible.  
• Any attempt to start the engine will fail  
while the warning is active. The mes-  
sage appearing in the information dis-  
play in the instrument cluster will also  
indicate this condition. Refer to “Informa-  
tion display” in “BEFORE DRIVING” sec-  
tion for details.  
• Normally, the immobilizer/keyless push  
start system warning light should go out  
and the master warning indicator light  
should stop blinking shortly after the  
remote controller is brought back inside  
the vehicle. If they remain lit and blinking,  
change the ignition mode to “LOCK” (OFF)  
3-9  
52RM0-01E  

Related Topics

OPERATING YOUR VEHICLE
Exhaust gas warning Daily inspection checklist Engine oil consumption Ignition switch (vehicle without keyless push start system) (if equipped) Engine switch (vehicle with keyless push start system) (if equipped) Parking brake lever Pedal Starting engine (vehicle without keyless push start system) (if equipped) Starting engine (vehicle with keyless push start system) (if equipped) Using transaxle Gearshift indicator SHVS (Smart Hybrid Vehicle by Suzuki) (if equipped) Adaptive cruise control system (if equipped) Speed limiter (if equipped) Emergency stop signal (ESS) Rearview camera (if equipped) Braking Electronic stability program (ESP?)

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot