Get OTHER CONTROLS AND EQUIPMENT -> Heating system Guide for Suzuki Swift 4 Door First generation (2004-2009)

OTHER CONTROLS AND EQUIPMENT

Center outlet

Side outlet

Heating system

(2)

Description of controls

(1)

(4)

(2)

(1)

52RM50230

Move the knob (1) vertically or horizontally,

to adjust the direction of airflow as desired.

The side outlet opens when you turn the

dial (2) upward and closes when you turn it

downward.

(3)

75RM019

52RM50240

When open, air comes out regardless of

the air flow selector position.

Temperature selector (1)

This is used to adjust the temperature.

CAUTION

Prolonged exposure to hot air from

the heater or air conditioner could

result in low temperature burns. All

vehicle occupants, particularly chil-

dren, the elderly, those with special

needs, individuals with delicate skin,

and sleeping individuals, should

maintain sufficient distance from the

air outlets to prevent prolonged

exposure to hot airflow.

Blower speed selector (2)

This is used to turn on the blower and to

select blower speed.

5-15

52RM0-01E

OTHER CONTROLS AND EQUIPMENT

Air intake selector (3)

Air flow selector (4)

VENTILATION (c)

(e)

(a)

(b)

(d)

(c)

(f)

52RM50310

This selector is used to select the following

modes.

(g)

FRESH AIR (a)

When this mode is selected by moving the

lever to left, outside air comes in.

52RM50250

52RM50630

RECIRCULATED AIR (b)

This is used to select one of the following

functions.

Temperature-controlled air comes out of

the center and side air outlets.

When this mode is selected by moving the

lever to right, outside air is shut out and

inside air is recirculated. This mode is suit-

able when driving through dusty or polluted

air such as in a tunnel, or when attempting

to quickly cool down or warm up the inte-

rior.

NOTE:

If you select RECIRCULATED AIR for an

extended period of time, the air in the vehi-

cle can become contaminated and the win-

dows tend to get misted. Therefore, you

should select FRESH AIR whenever possi-

ble.

5-16

52RM0-01E

OTHER CONTROLS AND EQUIPMENT

BI-LEVEL (d)

HEAT (e)

HEAT & DEFROST (f)

52RM50640

52RM50650

52RM50660

Temperature-controlled air comes out of

the floor outlets and cooler air comes out

of the center and side outlets. When the

temperature selector (1) is in the fully cold

position or fully hot position, however, the

air from the floor outlets and the air from

the center and side outlets will be the

same temperature.

Temperature-controlled air comes out of

the floor outlets and the side outlets, also

comes out of the windshield defroster out-

lets and also comes slightly out of the side

defroster outlets.

Temperature-controlled air comes out of

the floor outlets, the windshield defroster

outlets, the side defroster outlets and the

side outlets.

5-17

52RM0-01E

OTHER CONTROLS AND EQUIPMENT

DEFROST (g)

Head cooled/Feet warmed heating

System operating instructions

Select BI-LEVEL and FRESH AIR, the

temperature selector to the desired tem-

perature position, and the blower speed

selector to the desired blower speed posi-

tion. Unless the temperature selector is in

the fully cold position or fully hot position,

the air that comes out of the center and

side outlets will be cooler than the air that

comes out of the floor outlets.

Natural ventilation

Select VENTILATION and FRESH AIR, the

temperature selector to the desired tem-

perature position, and the blower speed

selector to off. Fresh air will flow through

the vehicle during driving.

Forced ventilation

Defrosting/Feet warmed heating

The base settings are the same as for nat-

ural ventilation except you set the blower

speed selector to a position other than off.

Select HEAT & DEFROST and FRESH

AIR, the temperature selector to the

desired temperature position, and the

blower speed selector to high. When the

windshield has become clear, set the

blower speed selector to the desired

blower speed position.

52RM50670

Normal heating (using outside air)

Select HEAT and FRESH AIR, the tem-

perature selector to the desired tempera-

ture position and the blower speed selector

to the desired blower speed position. Set-

ting the blower speed selector to a higher

blower speed position increases heating

efficiency.

Temperature-controlled air comes out of

the windshield defroster outlets, the side

defroster outlets and the side outlets.

Defrosting

Select DEFROST and FRESH AIR, the

temperature selector to the desired tem-

perature position (higher temperature pro-

vides more efficient defrosting), and the

blower speed selector to high. When the

windshield has become clear, set the

blower speed selector to the desired

blower speed position.

Quick heating (using recirculated air)

The base settings are the same as for nor-

mal heating except you select RECIRCU-

LATED AIR. If you use this heating method

for an extended period of time, the air in

the vehicle can become contaminated and

the windows can become misty. Therefore,

use this method only for quick heating and

change to the normal heating method as

soon as possible.

5-18

52RM0-01E

OTHER CONTROLS AND EQUIPMENT -> Heating system for Your Suzuki Swift 4 Door First generation (2004-2009)

Related Topics

Popular Owner Manuals

Latest Owner Manuals