Smart Summon
NOTE: Depending on market region, vehicle
configuration, options purchased, and
software version, your vehicle may not be
equipped with Smart Summon.
WARNING: Smart Summon's
performance depends on the
ultrasonic sensors, the visibility of the
cameras, and the availability of an
adequate cellular signal and GPS data.
Smart Summon is designed to allow you to
move Model 3 to your location (using your
phone's GPS as a target destination) or to a
location of your choice, maneuvering around
and stopping for objects as necessary. Smart
Summon works with the Tesla mobile app
when your phone is located within
WARNING: When using Smart
Summon, you must maintain a clear
line of sight between you and Model 3
and stay prepared to stop the vehicle
at any time by releasing the button on
the mobile app.
approximately 20 feet (6 meters) of Model 3.
Using ultrasonic sensors, cameras, and GPS
data, Smart Summon maneuvers Model 3 out
of parking spaces and around corners. This is
useful for moving Model 3 out of a tight
parking spot, through puddles, or helping you
retrieve your car while carrying packages. You
must maintain a clear line of sight between
you and Model 3 and closely monitor the
vehicle and its surroundings at all times.
Before Using Smart Summon
• Download the latest version of the Tesla
mobile app to your phone, and ensure
your phone has cellular service and GPS
enabled.
• Your phone must be connected to Model
3 and located within approximately 20
feet (6 meters).
CAUTION: Ensure all cameras and
sensors are clean. Unclean cameras
and sensors, as well as environmental
conditions such as rain and faded lane
markings, can affect Autopilot
performance.
• The vehicle's Autopilot cameras must be
fully calibrated (see Drive to Calibrate
Cameras on page 107).
• You must have a clear line of sight to
Model 3.
WARNING: Smart Summon is
designed and intended for use only on
parking lots and driveways located on
private property where the
• Model 3 must be in Park, not charging,
and all doors and trunks must be closed.
surrounding area is familiar and
predictable. Do not use Smart
Summon on public roads.
Using Smart Summon
WARNING: Smart Summon must only
be used on paved surfaces.
1. Open the Tesla mobile app, and press
SUMMON.
WARNING: Smart Summon is a BETA
feature. You must continually monitor
the vehicle and its surroundings and
stay prepared to take immediate
action at any time. It is the driver's
responsibility to use Smart Summon
safely, responsibly, and as intended.
2. Press the Smart Summon icon located in
the center of the image of your Model 3. It
may take several seconds for Smart
Summon to start up.
NOTE: You can use Standby Mode to
eliminate the delay that occurs when
Smart Summon is starting up (see
Standby Mode on page 141).
WARNING: Smart Summon may not
stop for all objects (especially very
low objects such as some curbs, or
very high objects such as a shelf) and
may not react to all traffic. Smart
Summon does not recognize the
direction of traffic, does not navigate
around empty parking spaces, and
may not anticipate crossing traffic.
The mobile app displays a map with a
blue circle, which represents the
maximum proximity of 20 feet (6 meters)
that you must maintain between your
phone and Model 3. The blue dot on the
map represents your location, and the red
arrow represents the location of Model 3.
Autopilot
139