OTHER EQUIPMENT
Clock
Overspeed warning display
The clock is displayed when the ignition is
set to ACC or ON.
To set the clock:
Before setting the clock, the overspeed warn-
ing display must be turned off. Press the
MODE button once or twice to turn off the
overspeed warning display.
1. Press and hold the MODE button for 1
second. The hour digit will flash.
2. Press “” or “” to select the hour digit.
3. Press MODE button to set the selected
hour digit. The minute digit will flash.
4. Press “” or “” to select the minute
digit.
The overspeed warning function sounds
an alarm and flashes the display if vehicle
speed exceeds the preset vehicle speed.
5. Press MODE button to set the selected
minute digit.
If the electrical power source has been dis-
connected from the clock, the time display
will automatically be set to 1:00 (one o’clock).
The warning display changes as follows each
time the MODE button is pressed:
1. Preset mode
When the instrument panel lights are turned
on, the brightness of the time indicator will
be reduced.
2. Manual setting mode
3. Display off (warning function off)
SETTING THE VEHICLE SPEED
The ignition switch must be set to ON.
In the preset mode
1. Press “” or “” and select “P1”, “P2”
or “P3”.
2. Press and hold the MODE button for 1
second.
178
English 
