Get Other Equipment -> Overspeed warning display Guide for Toyota Aurion 4 Door First Generation (2006-2012)

OTHER EQUIPMENT

Clock

Overspeed warning display

The clock is displayed when the ignition is

set to ACC or ON.

To set the clock:

Before setting the clock, the overspeed warn-

ing display must be turned off. Press the

MODE button once or twice to turn off the

overspeed warning display.

1. Press and hold the MODE button for 1

second. The hour digit will flash.

2. Press “” or “” to select the hour digit.

3. Press MODE button to set the selected

hour digit. The minute digit will flash.

4. Press “” or “” to select the minute

digit.

The overspeed warning function sounds

an alarm and flashes the display if vehicle

speed exceeds the preset vehicle speed.

5. Press MODE button to set the selected

minute digit.

If the electrical power source has been dis-

connected from the clock, the time display

will automatically be set to 1:00 (one o’clock).

The warning display changes as follows each

time the MODE button is pressed:

1. Preset mode

When the instrument panel lights are turned

on, the brightness of the time indicator will

be reduced.

2. Manual setting mode

3. Display off (warning function off)

SETTING THE VEHICLE SPEED

The ignition switch must be set to ON.

In the preset mode

1. Press “” or “” and select “P1”, “P2”

or “P3”.

2. Press and hold the MODE button for 1

second.

178

OTHER EQUIPMENT

Cigarette lighter and ashtray

3. Press “” or “” to adjust to the desired

vehicle speed.

4. Press MODE button to set.

In the manual setting mode

1. Press “” or “” to adjust to the desired

vehicle speed.

2. Press “” and “” simultaneously to set.

The setting speed can be adjusted at 5 km/h

intervals, between 40 to 130 km/h.

“---- km/h” appears when the speed above 130

km/h is selected, and the warning function

is disabled.

CIGARETTE LIGHTER

Activating the warning function

To use the cigarette lighter, push on the

lid to open it. Then press the cigarette

lighter in. After it finishes heating up, it

automatically pops out ready for use.

If vehicle speed rises above the preset vehi-

cle speed, the buzzer will sound and the

warning display will flash for 5 seconds. After

that, if the vehicle speed is still above the

preset vehicle speed, the warning display will

keep flashing and a remainder beep will be

given every 30 seconds.

If the engine is not running, the ignition switch

must be set to ACC to use the lighter.

Do not hold the cigarette lighter pressed in.

When vehicle speed drops 3 km/h below the

preset speed, the warning function is auto-

matically cancelled.

Use a Toyota genuine cigarette lighter or

equivalent for replacement.

ASHTRAY

If the MODE button is pressed while warning

is activated, current warning is temporarily

cancelled. When vehicle speed drops 3 km/h

below the preset speed and then rises above

the preset speed, the warning function will

activate again.

To use the ashtray, push on the lid.

When finished with your cigarette, thoroughly

extinguish it in the ashtray to prevent other

cigarette butts from catching fire. After using

the ashtray, close the lid completely.

To remove the ashtray, press down on the

lock spring plate and pull out.

If the electrical power source has been dis-

connected, the overspeed warning display

turns off and the preset vehicle speed is set

to “---- km/h”.

CAUTION

To reduce the chance of injury in case

of an accident or sudden stop while driv-

ing, always completely close the ashtray

after use.

179

Other Equipment -> Overspeed warning display for Your Toyota Aurion 4 Door First Generation (2006-2012)

Related Topics

Other Equipment

Popular Owner Manuals

Latest Owner Manuals