Get VEHICLE SPECIFICATIONS Guide for Toyota Aurion 4 Door Second Generation (2013-2017)

VEHICLE SPECIFICATIONS

Specifications ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 326

DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .326

ENGINE NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .326

VEHICLE IDENTIFICATION NUMBER (VIN). . . . . . . . . . . . .326

ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .327

FUEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .328

LUBRICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329

COOLING SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330

IGNITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330

ELECTRICAL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330

AUTOMATIC TRANSAXLE . . . . . . . . . . . . . . . . . . . . . . . . . . .331

BRAKES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331

STEERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331

TYRES AND WHEELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332

Customisation ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 333

CUSTOMISABLE FEATURES . . . . . . . . . . . . . . . . . . . . . . . . .333

CUSTOMISING DOOR LOCK AND UNLOCK

FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .338

VEHICLE SPECIFICATIONS

Specifications

DIMENSIONS

4835 mm (190.4 in.) - Vehicles without front

spoiler

Overall length

4855 mm (191.1 in.) - Vehicles with front

spoiler

Overall width

1825 mm (71.9 in.)

Except Papua New Guinea and Fiji:

– 1470 mm (57.9 in.)

Overall height (Unladen)

Papua New Guinea and Fiji:

– 1480 mm (58.3 in.)

Wheelbase

Front tread

Rear tread

2775 mm (109.3 in.)

1575 mm (62.0 in.)

1565 mm (61.6 in.)

ENGINE NUMBER

The engine number is stamped on the

engine block as shown.

VEHICLE IDENTIFICATION NUMBER (VIN)

The vehicle identification number (VIN) is

the legal identifier for your vehicle. This

number is stamped under the right front

seat.

This is the primary identification number

for your Toyota. It is used in registering the

ownership of your vehicle.

326

VEHICLE SPECIFICATIONS

Specifications

The vehicle identification number (VIN) is

also on the manufacturer’s label.

The manufacturer’s label adhered on the

left front and rear door pillars contains

VIN and other model data such as date of

manufacture.

Date of manufacture

The date of manufacture, indicated on the

vehicle as the “Built Date”, is the calendar

month and year in which the body shell

and powertrain sub-assemblies are joined

and the vehicle is driven or moved from the

production line.

Use the VIN, built date and other model

data to identify your Toyota for purposes

such as registration, parts ordering,

insurance, and communication with Toyota.

CTY61PAC001

ENGINE

Model

2GR-FE

Type

6 cylinder V type, 4 cycle, petrol

94.0 x 83.0 mm (3.70 x 3.27 in.)

3456 cm3 (210.9 cu in.)

Bore and stroke

Displacement

Drive belt tension

Valve clearance (engine cold)

Automatic adjustment

327

VEHICLE SPECIFICATIONS

Specifications

FUEL

Selecting the correct fuel is essential for satisfactory engine performance.

Engine damage caused by use of incorrect fuels is not covered under Toyota’s new vehicle

warranty.

Unleaded petrol only

Fuel type

(Unleaded petrol containing up to 10%

ethanol may be safely used)

Research Octane Number (RON)

Fuel tank capacity

91 or higher

70 L (18.5 gal., 15.4 Imp. gal.)

To help prevent petrol station mix-ups, your vehicle has a smaller fuel tank opening. The

special nozzle on pumps with unleaded fuel will fit it, but the larger standard nozzle on

pumps with leaded petrol will not.

NOTICE

Do not use leaded petrol. Use of leaded petrol will cause the three-way catalytic

converter to lose its effectiveness and the emission control system to function

incorrectly. Also, this can increase maintenance costs.

If your engine knocks

If you detect heavy knocking even when using the recommended fuel, or if you hear steady

knocking while holding a steady speed on level roads, consult your Toyota dealer.

However, occasionally, you may notice light knocking for a short time while accelerating or

driving up hills. This is normal and there is no need for concern.

328

VEHICLE SPECIFICATIONS

Specifications

LUBRICATION

Oil capacity (drain and refill*)

 With filter

6.1 L (6.4 qt., 5.4 Imp. qt.)

 Without filter

5.7 L (6.0 qt., 5.0 Imp. qt.)

5W-30, 10W-30:

Oil grade

API grade SL “Energy-Conserving”, SM

“Energy-Conserving”, SN “Resource-

Conserving” or ILSAC multigrade engine oil

15W-40 and 20W-50:

API grade SL, SM or SN multigrade engine

oil

Recommended oil viscosity

“Toyota Genuine Motor Oil” is used in

your Toyota vehicle. Use Toyota approved

“Toyota Genuine Motor Oil” or equivalent

to satisfy the following grade and viscosity.

Temperature range anticipated before

next oil change.

*: The engine oil capacity is a reference quantity to be used when changing the engine oil.

Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the

dipstick.

Please contact your Toyota dealer for further details.

329

VEHICLE SPECIFICATIONS

Specifications

COOLING SYSTEM

Total capacity

Coolant type

9.4 L (9.9 qt., 8.3 Imp. qt.)

“Toyota Super Long Life Coolant” is used in

your Toyota vehicle at factory fill.

In order to avoid technical problems, only

use “Toyota Super Long Life Coolant” or

similar high quality ethylene glycol based

non-silicate, non-amine, non-nitrite, and non-

borate coolant with long-life hybrid organic

acid technology.

Coolant with long-life hybrid organic

acid technology is a combination of low

phosphates and organic acids.

Do not use plain water alone.

Contact your Toyota dealer for further details.

IGNITION

Spark plug

DENSO

FK20HR11

Spark plug gap

1.1 mm (0.043 in.)

NOTICE

Use only iridium tipped spark plugs. Do not adjust the spark plug gap.

ELECTRICAL SYSTEM

Battery

Specific gravity reading at 20°C (68°F):

1.250–1.270 Fully charged

1.160–1.180 Half charged

1.060–1.080 Discharged

Charging rates

Quick charge: 15 A max.

Slow charge: 5 A max.

NOTE: If the battery requires replacement, ensure the new battery meets the same

standard as the original.

330

VEHICLE SPECIFICATIONS

Specifications

AUTOMATIC TRANSAXLE

Fluid capacity*

Fluid type

6.5 L (6.9 qt., 5.7 Imp. qt.)

Toyota Genuine ATF WS

*: The fluid capacity is a reference quantity only.

Generally, it is necessary to change automatic transmission fluid only if your vehicle is

driven under one of the Additional Service Requirements listed in your “Warranty and

Service Book”.

When changing the automatic transmission fluid, use only “Toyota Genuine ATF WS” (ATF

JWS3324 or NWS9638) to aid in assuring optimum transaxle performance.

NOTICE

Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause

deterioration in shift quality, locking up of your transmission accompanied by vibration,

and ultimately damage the automatic transmission of your vehicle.

Please contact your Toyota dealer for further details.

BRAKES

Minimum pedal clearance

–when depressed with the force of 500 N

(51 kgf, 112 lbf) with the engine running.

98 mm (3.86 in.)

Pedal free play

1–6 mm (0.04–0.24 in.)

Parking brake pedal travel

–when depressed with the force of 300 N 9–12 clicks

(31 kgf, 67 lbf)

Fluid type

SAE J1703 or FMVSS No.116 DOT 3

STEERING

Steering wheel free play

Less than 30 mm (1.2 in)

331

VEHICLE SPECIFICATIONS

Specifications

TYRES AND WHEELS

16-inch wheels

Tyre size

215/60R16 95V

Tyre inflation pressure

(cold tyre)

240 kPa (2.4 kgf/cm²or bar, 35 psi)

Wheel size

16 x 6 1/2 J

Wheel nut torque

103 Nm (10.5 kgf m, 76 lb ft∙)

17-inch wheels

Tyre size

215/55R17 94V tyres

Tyre inflation pressure

– cold tyre

240 kPa (2.4 kgf/cm²or bar, 35 psi)

Wheel size

17 x 7 J

Wheel nut torque

103 Nm (10.5 kgf m, 76 lb ft∙)

NOTE: For complete information on tyres (e.g. replacing tyres or replacing wheels), refer to

“Tyres” on page 267 through to “Wheels” on page 271.

332

VEHICLE SPECIFICATIONS

Customisation

CUSTOMISABLE FEATURES

Introduction

Your vehicle includes a variety of electronic features that can be personalised.

Programming some of these settings requires specialised equipment and must be

^{performed by your Toyota dealer, while others you can do yourself. This is shown by a} ^or

in the applicable column for each system.



These settings can be changed using the touch-screen audio system.

For details refer to “Vehicle settings” on page 167.

Touch-screen

These settings can be changed using the navigation system. For further

Navigation

details, refer to the Navigation System Owner’s Manual.

These settings can be changed by your Toyota dealer using specialised

equipment.

Dealer

On vehicles with smart entry and start system, this setting can be

Key

changed with the wireless remote control on the electronic key. For

details, referto“Customisingdoorlockandunlockfunctions”onpage338.

NOTE: Some settings may affect another system, this is shown where two systems are

described together. Contact your Toyota dealer for further assistance.

Wireless remote control and Smart entry and start system*

Function

Default Setting

Customised setting

Time before automatic door

lock function is activated,

if door is not opened after

being unlocked

60 seconds

30 seconds

ON

  

  

120 seconds

Operation signal

(Hazard answer back)

OFF

Operation signal

(Door lock buzzer)

ON

OFF

  

  

Open door warning buzzer

Operation buzzer volume

(Lock feedback volume)

Level 5

OFF to Level 7

* For further information on customising these systems refer to “Introduction” on page 333.

333

VEHICLE SPECIFICATIONS

Customisation

Wireless remote control*

Function

Default Setting

Customised setting

Wireless remote control

ON

OFF

  

  

Driver’s door

unlocked in one

step, all doors

unlocked in two

steps

Unlock operation

(Remote 2-press unlock)

All doors unlocked

in one step

OFF

Press and hold

(long)

Press and hold the

boot lid open switch

(short)

Boot lid opening

  

Press twice

One short press

Smart entry and start system*

Function

Default Setting

Customised setting

Unlock the doors by simply

carrying a key

All doors

Twice

ON

Driver’s door

Unlimited

OFF

  

  

  

Number of permissible times

of continuous smart lock

Smart entry and start system

(Entry and start system)

* For further information on customising these systems refer to “Introduction” on page 333.

334

VEHICLE SPECIFICATIONS

Customisation

Door lock*

Function

Default Setting

Customised setting

Speed-detecting automatic

door lock function

(Speed sensitive auto

locking)

ON

OFF

  

Opening the driver’s door

unlocks all the doors

OFF

ON

  

  

Moving the shift lever to P

position unlocks all doors

(Auto unlock by shift to P)

Moving the shift lever out of P

position locks all doors

Auto lock by shift from P)

OFF

ON

  

  

Driver’s door

unlocked in one

step, all doors

unlocked in two

steps

All doors unlocked

in one step

Unlocking using a key

Automatic light control system*

Function

Default Setting

Customised setting

Level 1 to

Level 5

Light sensor sensitivity

Level 3

  

Time before headlights

automatically come on

Standard

ON

Longer

OFF

  

Automatic high beam system

* For further information on customising these systems refer to “Introduction” on page 333.

335

VEHICLE SPECIFICATIONS

Customisation

Interior illumination*

Function

Default Setting

Customised setting

OFF

Time before interior lights

turn off

15 seconds

ON

7.5 seconds

30 seconds

  

  

Operation when the doors

are unlocked

OFF

Vehicles with standard type

ignition switch:

Operation after the ignition

switch turned to the LOCK

position

ON

OFF

  

Vehicles with smart entry and

start system:

Operation after the ENGINE

START STOP switch is

pressed OFF

OFF

Vehicles with smart entry and

start system:

Operation when you

approach the vehicle with the

electronic key on your person

ON

Automatic air conditioning system*

Function

Default Setting

Customised setting

Switching between outside

air and recirculated air

mode linked to AUTO switch

operation

Auto

Manual

  

A/C auto switch operation

* For further information on customising these systems refer to “Introduction” on page 333.

336

VEHICLE SPECIFICATIONS

Customisation

Toyota parking assist sensor

Function

Default Setting

Customised setting

Buzzer volume

Level 3

Levels 1 to 5

  

Power windows and moon roof*

Function

Default Setting

Customised setting

Key linked opening

Key linked closing

OFF

ON

  

Wireless remote control

linked opening

OFF

ON

  

Wireless remote control

linked opening buzzer

OFF

Moon roof*

Function

Default Setting

Customised setting

Linked operation of

components when door key

is used

Slide only

Tilt only

  

Linked operation of

components when wireless

remote control is used

* For further information on customising these systems refer to “Introduction” on page 333.

337

VEHICLE SPECIFICATIONS

Customisation

CUSTOMISING DOOR LOCK AND UNLOCK FUNCTIONS

Vehicles with smart entry and start system

It is possible to set which doors the smart entry function unlocks when using the wireless

remote control on the electronic key.

1. Press the ENGINE START STOP switch off.

2. When the indicator on the key is off, press and hold either or

or

for about

5 seconds while also pressing and holding

.

3. A confirmation beep will sound.

•

The setting will change (from default to customised to default, etc.) each time the

above operation is performed.

Setting

Unlocking doors

Beep

•

Holding the driver’s door handle

unlocks only the driver’s door

Exterior: Three double beeps

Interior: Beeps once

Customised

Holding the front passenger’s door

handle unlocks all doors

Holding either front door handle unlocks

all doors

Exterior: Two double beeps

Interior: Beeps once

Default

•

If changing the setting continuously, release the buttons after each change, wait for at

least 5 seconds, and repeat step 2.

To prevent unintended triggering of the alarm after the settings have been changed,

unlock the doors using the wireless remote control and open and close a door once.

–

If a door is not opened within 30 seconds after is pressed, the doors will be

locked again and the alarm will automatically be set.

–

If the alarm is triggered, immediately stop the alarm by pressing a switch on the

electronic key or pressing the ENGINE START STOP switch to IGNITION ON mode.

338

VEHICLE SPECIFICATIONS for Your Toyota Aurion 4 Door Second Generation (2013-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals