Get VEHICLE SPECIFICATIONS -> Specifications Guide for Toyota Aurion 4 Door Second Generation (2013-2017)

VEHICLE SPECIFICATIONS

Specifications

DIMENSIONS

4835 mm (190.4 in.) - Vehicles without front

spoiler

Overall length

4855 mm (191.1 in.) - Vehicles with front

spoiler

Overall width

1825 mm (71.9 in.)

Except Papua New Guinea and Fiji:

– 1470 mm (57.9 in.)

Overall height (Unladen)

Papua New Guinea and Fiji:

– 1480 mm (58.3 in.)

Wheelbase

Front tread

Rear tread

2775 mm (109.3 in.)

1575 mm (62.0 in.)

1565 mm (61.6 in.)

ENGINE NUMBER

The engine number is stamped on the

engine block as shown.

VEHICLE IDENTIFICATION NUMBER (VIN)

The vehicle identification number (VIN) is

the legal identifier for your vehicle. This

number is stamped under the right front

seat.

This is the primary identification number

for your Toyota. It is used in registering the

ownership of your vehicle.

326

VEHICLE SPECIFICATIONS

Specifications

The vehicle identification number (VIN) is

also on the manufacturer’s label.

The manufacturer’s label adhered on the

left front and rear door pillars contains

VIN and other model data such as date of

manufacture.

Date of manufacture

The date of manufacture, indicated on the

vehicle as the “Built Date”, is the calendar

month and year in which the body shell

and powertrain sub-assemblies are joined

and the vehicle is driven or moved from the

production line.

Use the VIN, built date and other model

data to identify your Toyota for purposes

such as registration, parts ordering,

insurance, and communication with Toyota.

CTY61PAC001

ENGINE

Model

2GR-FE

Type

6 cylinder V type, 4 cycle, petrol

94.0 x 83.0 mm (3.70 x 3.27 in.)

3456 cm3 (210.9 cu in.)

Bore and stroke

Displacement

Drive belt tension

Valve clearance (engine cold)

Automatic adjustment

327

VEHICLE SPECIFICATIONS

Specifications

FUEL

Selecting the correct fuel is essential for satisfactory engine performance.

Engine damage caused by use of incorrect fuels is not covered under Toyota’s new vehicle

warranty.

Unleaded petrol only

Fuel type

(Unleaded petrol containing up to 10%

ethanol may be safely used)

Research Octane Number (RON)

Fuel tank capacity

91 or higher

70 L (18.5 gal., 15.4 Imp. gal.)

To help prevent petrol station mix-ups, your vehicle has a smaller fuel tank opening. The

special nozzle on pumps with unleaded fuel will fit it, but the larger standard nozzle on

pumps with leaded petrol will not.

NOTICE

Do not use leaded petrol. Use of leaded petrol will cause the three-way catalytic

converter to lose its effectiveness and the emission control system to function

incorrectly. Also, this can increase maintenance costs.

If your engine knocks

If you detect heavy knocking even when using the recommended fuel, or if you hear steady

knocking while holding a steady speed on level roads, consult your Toyota dealer.

However, occasionally, you may notice light knocking for a short time while accelerating or

driving up hills. This is normal and there is no need for concern.

328

VEHICLE SPECIFICATIONS

Specifications

LUBRICATION

Oil capacity (drain and refill*)

 With filter

6.1 L (6.4 qt., 5.4 Imp. qt.)

 Without filter

5.7 L (6.0 qt., 5.0 Imp. qt.)

5W-30, 10W-30:

Oil grade

API grade SL “Energy-Conserving”, SM

“Energy-Conserving”, SN “Resource-

Conserving” or ILSAC multigrade engine oil

15W-40 and 20W-50:

API grade SL, SM or SN multigrade engine

oil

Recommended oil viscosity

“Toyota Genuine Motor Oil” is used in

your Toyota vehicle. Use Toyota approved

“Toyota Genuine Motor Oil” or equivalent

to satisfy the following grade and viscosity.

Temperature range anticipated before

next oil change.

*: The engine oil capacity is a reference quantity to be used when changing the engine oil.

Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the

dipstick.

Please contact your Toyota dealer for further details.

329

VEHICLE SPECIFICATIONS

Specifications

COOLING SYSTEM

Total capacity

Coolant type

9.4 L (9.9 qt., 8.3 Imp. qt.)

“Toyota Super Long Life Coolant” is used in

your Toyota vehicle at factory fill.

In order to avoid technical problems, only

use “Toyota Super Long Life Coolant” or

similar high quality ethylene glycol based

non-silicate, non-amine, non-nitrite, and non-

borate coolant with long-life hybrid organic

acid technology.

Coolant with long-life hybrid organic

acid technology is a combination of low

phosphates and organic acids.

Do not use plain water alone.

Contact your Toyota dealer for further details.

IGNITION

Spark plug

DENSO

FK20HR11

Spark plug gap

1.1 mm (0.043 in.)

NOTICE

Use only iridium tipped spark plugs. Do not adjust the spark plug gap.

ELECTRICAL SYSTEM

Battery

Specific gravity reading at 20°C (68°F):

1.250–1.270 Fully charged

1.160–1.180 Half charged

1.060–1.080 Discharged

Charging rates

Quick charge: 15 A max.

Slow charge: 5 A max.

NOTE: If the battery requires replacement, ensure the new battery meets the same

standard as the original.

330

VEHICLE SPECIFICATIONS

Specifications

AUTOMATIC TRANSAXLE

Fluid capacity*

Fluid type

6.5 L (6.9 qt., 5.7 Imp. qt.)

Toyota Genuine ATF WS

*: The fluid capacity is a reference quantity only.

Generally, it is necessary to change automatic transmission fluid only if your vehicle is

driven under one of the Additional Service Requirements listed in your “Warranty and

Service Book”.

When changing the automatic transmission fluid, use only “Toyota Genuine ATF WS” (ATF

JWS3324 or NWS9638) to aid in assuring optimum transaxle performance.

NOTICE

Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause

deterioration in shift quality, locking up of your transmission accompanied by vibration,

and ultimately damage the automatic transmission of your vehicle.

Please contact your Toyota dealer for further details.

BRAKES

Minimum pedal clearance

–when depressed with the force of 500 N

(51 kgf, 112 lbf) with the engine running.

98 mm (3.86 in.)

Pedal free play

1–6 mm (0.04–0.24 in.)

Parking brake pedal travel

–when depressed with the force of 300 N 9–12 clicks

(31 kgf, 67 lbf)

Fluid type

SAE J1703 or FMVSS No.116 DOT 3

STEERING

Steering wheel free play

Less than 30 mm (1.2 in)

331

VEHICLE SPECIFICATIONS

Specifications

TYRES AND WHEELS

16-inch wheels

Tyre size

215/60R16 95V

Tyre inflation pressure

(cold tyre)

240 kPa (2.4 kgf/cm²or bar, 35 psi)

Wheel size

16 x 6 1/2 J

Wheel nut torque

103 Nm (10.5 kgf m, 76 lb ft∙)

17-inch wheels

Tyre size

215/55R17 94V tyres

Tyre inflation pressure

– cold tyre

240 kPa (2.4 kgf/cm²or bar, 35 psi)

Wheel size

17 x 7 J

Wheel nut torque

103 Nm (10.5 kgf m, 76 lb ft∙)

NOTE: For complete information on tyres (e.g. replacing tyres or replacing wheels), refer to

“Tyres” on page 267 through to “Wheels” on page 271.

332

VEHICLE SPECIFICATIONS -> Specifications for Your Toyota Aurion 4 Door Second Generation (2013-2017)

Related Topics

VEHICLE SPECIFICATIONS

Popular Owner Manuals

Latest Owner Manuals