Get VEHICLE SPECIFICATIONS -> Customisation Guide for Toyota Aurion 4 Door Second Generation (2013-2017)

VEHICLE SPECIFICATIONS

Customisation

CUSTOMISABLE FEATURES

Introduction

Your vehicle includes a variety of electronic features that can be personalised.

Programming some of these settings requires specialised equipment and must be

^{performed by your Toyota dealer, while others you can do yourself. This is shown by a} ^or

in the applicable column for each system.



These settings can be changed using the touch-screen audio system.

For details refer to “Vehicle settings” on page 167.

Touch-screen

These settings can be changed using the navigation system. For further

Navigation

details, refer to the Navigation System Owner’s Manual.

These settings can be changed by your Toyota dealer using specialised

equipment.

Dealer

On vehicles with smart entry and start system, this setting can be

Key

changed with the wireless remote control on the electronic key. For

details, referto“Customisingdoorlockandunlockfunctions”onpage338.

NOTE: Some settings may affect another system, this is shown where two systems are

described together. Contact your Toyota dealer for further assistance.

Wireless remote control and Smart entry and start system*

Function

Default Setting

Customised setting

Time before automatic door

lock function is activated,

if door is not opened after

being unlocked

60 seconds

30 seconds

ON

  

  

120 seconds

Operation signal

(Hazard answer back)

OFF

Operation signal

(Door lock buzzer)

ON

OFF

  

  

Open door warning buzzer

Operation buzzer volume

(Lock feedback volume)

Level 5

OFF to Level 7

* For further information on customising these systems refer to “Introduction” on page 333.

333

VEHICLE SPECIFICATIONS

Customisation

Wireless remote control*

Function

Default Setting

Customised setting

Wireless remote control

ON

OFF

  

  

Driver’s door

unlocked in one

step, all doors

unlocked in two

steps

Unlock operation

(Remote 2-press unlock)

All doors unlocked

in one step

OFF

Press and hold

(long)

Press and hold the

boot lid open switch

(short)

Boot lid opening

  

Press twice

One short press

Smart entry and start system*

Function

Default Setting

Customised setting

Unlock the doors by simply

carrying a key

All doors

Twice

ON

Driver’s door

Unlimited

OFF

  

  

  

Number of permissible times

of continuous smart lock

Smart entry and start system

(Entry and start system)

* For further information on customising these systems refer to “Introduction” on page 333.

334

VEHICLE SPECIFICATIONS

Customisation

Door lock*

Function

Default Setting

Customised setting

Speed-detecting automatic

door lock function

(Speed sensitive auto

locking)

ON

OFF

  

Opening the driver’s door

unlocks all the doors

OFF

ON

  

  

Moving the shift lever to P

position unlocks all doors

(Auto unlock by shift to P)

Moving the shift lever out of P

position locks all doors

Auto lock by shift from P)

OFF

ON

  

  

Driver’s door

unlocked in one

step, all doors

unlocked in two

steps

All doors unlocked

in one step

Unlocking using a key

Automatic light control system*

Function

Default Setting

Customised setting

Level 1 to

Level 5

Light sensor sensitivity

Level 3

  

Time before headlights

automatically come on

Standard

ON

Longer

OFF

  

Automatic high beam system

* For further information on customising these systems refer to “Introduction” on page 333.

335

VEHICLE SPECIFICATIONS

Customisation

Interior illumination*

Function

Default Setting

Customised setting

OFF

Time before interior lights

turn off

15 seconds

ON

7.5 seconds

30 seconds

  

  

Operation when the doors

are unlocked

OFF

Vehicles with standard type

ignition switch:

Operation after the ignition

switch turned to the LOCK

position

ON

OFF

  

Vehicles with smart entry and

start system:

Operation after the ENGINE

START STOP switch is

pressed OFF

OFF

Vehicles with smart entry and

start system:

Operation when you

approach the vehicle with the

electronic key on your person

ON

Automatic air conditioning system*

Function

Default Setting

Customised setting

Switching between outside

air and recirculated air

mode linked to AUTO switch

operation

Auto

Manual

  

A/C auto switch operation

* For further information on customising these systems refer to “Introduction” on page 333.

336

VEHICLE SPECIFICATIONS

Customisation

Toyota parking assist sensor

Function

Default Setting

Customised setting

Buzzer volume

Level 3

Levels 1 to 5

  

Power windows and moon roof*

Function

Default Setting

Customised setting

Key linked opening

Key linked closing

OFF

ON

  

Wireless remote control

linked opening

OFF

ON

  

Wireless remote control

linked opening buzzer

OFF

Moon roof*

Function

Default Setting

Customised setting

Linked operation of

components when door key

is used

Slide only

Tilt only

  

Linked operation of

components when wireless

remote control is used

* For further information on customising these systems refer to “Introduction” on page 333.

337

VEHICLE SPECIFICATIONS

Customisation

CUSTOMISING DOOR LOCK AND UNLOCK FUNCTIONS

Vehicles with smart entry and start system

It is possible to set which doors the smart entry function unlocks when using the wireless

remote control on the electronic key.

1. Press the ENGINE START STOP switch off.

2. When the indicator on the key is off, press and hold either or

or

for about

5 seconds while also pressing and holding

.

3. A confirmation beep will sound.

•

The setting will change (from default to customised to default, etc.) each time the

above operation is performed.

Setting

Unlocking doors

Beep

•

Holding the driver’s door handle

unlocks only the driver’s door

Exterior: Three double beeps

Interior: Beeps once

Customised

Holding the front passenger’s door

handle unlocks all doors

Holding either front door handle unlocks

all doors

Exterior: Two double beeps

Interior: Beeps once

Default

•

If changing the setting continuously, release the buttons after each change, wait for at

least 5 seconds, and repeat step 2.

To prevent unintended triggering of the alarm after the settings have been changed,

unlock the doors using the wireless remote control and open and close a door once.

–

If a door is not opened within 30 seconds after is pressed, the doors will be

locked again and the alarm will automatically be set.

–

If the alarm is triggered, immediately stop the alarm by pressing a switch on the

electronic key or pressing the ENGINE START STOP switch to IGNITION ON mode.

338

VEHICLE SPECIFICATIONS -> Customisation for Your Toyota Aurion 4 Door Second Generation (2013-2017)

Related Topics

VEHICLE SPECIFICATIONS

Popular Owner Manuals

Latest Owner Manuals