Interior features for Your Toyota Auris 4 Door First Generation (2006-2012)

3-1. Using the air conditioning  
system and defogger  
Air conditioning system..... 244  
Rear window and  
outside rear view  
mirror defoggers ............. 251  
3-2. Using the audio system  
Audio system types........... 252  
Using the radio.................. 257  
Using the CD player.......... 262  
Playing back MP3 and  
WMA discs...................... 267  
Operating an iPod............. 273  
Operating a USB  
memory........................... 280  
Optimal use of the audio  
system ............................ 288  
Using the AUX port........... 291  
Using the steering wheel  
audio switches................ 292  
242  
 
 
Interior features  
3
3-3. Using the Bluetooth®  
3-5. Using the interior lights  
audio system  
Bluetooth® audio  
system............................ 295  
Using the Bluetooth®  
Interior lights list................ 336  
• Interior light..................... 337  
• Personal lights................ 338  
3-6. Using the storage  
features  
audio system .................. 299  
Operating a Bluetooth®  
enabled portable  
player.............................. 302  
Setting up a Bluetooth®  
enabled portable  
List of storage features ..... 339  
• Glove box ....................... 340  
• Console box.................... 340  
• Cup holders .................... 341  
• Auxiliary boxes ............... 342  
player.............................. 304  
Bluetooth® audio system  
setup............................... 308  
3-7. Other interior features  
Sun visors......................... 343  
Vanity mirrors.................... 344  
Clock................................. 345  
Portable ashtray................ 346  
Cigarette lighter ................ 347  
Power outlet...................... 349  
Seat heaters ..................... 350  
Floor mat........................... 352  
3-4. Using the hands-free  
phone system  
(for cellular phone)  
Hands-free phone system  
(for cellular phone)  
features .......................... 309  
Using the hands-free  
phone system  
(for cellular phone).......... 314  
Luggage compartment  
features........................... 353  
Making a phone call.......... 320  
Setting a cellular phone.... 323  
Security and system  
setup............................... 327  
Using the phone book....... 331  
243  
 
 
3-1. Using the air conditioning system and defogger  
Air conditioning system  
Air outlets and fan speed are automatically adjusted according to the  
temperature setting.  
Temperature control  
Automatic mode  
Air conditioning  
ON/OFF switch  
Windshield defogger  
Outside air or recirculated air mode  
Off  
Fan speed  
Air outlet display  
Temperature setting display  
Changes the air outlets used  
Fan speed display  
Using the automatic mode  
STEP  
STEP  
1
2
Press  
.
The air conditioning system will begin to operate.  
Press “” to increase the temperature and “” to decrease the  
temperature on  
.
244  
 
 
3-1. Using the air conditioning system and defogger  
Adjusting the settings  
Adjusting the temperature setting  
Press “” to increase the temperature and “” to decrease the tem-  
perature on  
.
Adjusting the fan speed  
Press “” (increase) or “” (decrease) on  
.
The fan speed is shown on the display. (7 levels)  
3
Press  
to turn the fan off.  
Changing the air outlets  
Press  
.
The air outlets switch each time  
is pressed. The air flow  
shown on the display indicates the following.  
Air flows to the upper body.  
: Some models  
245  
 
 
3-1. Using the air conditioning system and defogger  
Air flows to the upper body and  
feet.  
: Some models  
Mainly air flows to the feet.  
: Some models  
Air flows to the feet and the  
windshield defogger operates.  
Recirculated air mode will auto-  
matically switch to outside air  
mode.  
: Some models  
Switching air intake modes  
Press  
.
The mode switches between outside air mode (indicator off) and recircu-  
lated air mode (indicator on) each time is pressed.  
246  
 
 
3-1. Using the air conditioning system and defogger  
Defogging the windshield  
Defogging  
The air conditioning system oper-  
ates automatically.  
Recirculated air mode will auto-  
matically switch to outside air  
mode. It is not possible to return  
to recirculated air mode when the  
switch is on.  
3
Adjusting the position of and opening and closing the air outlets  
Center outlets (type A)  
Direct air flow to the left or  
right, up or down.  
Turn the knob up to open the  
vent and down to close the  
vent.  
247  
 
 
3-1. Using the air conditioning system and defogger  
Center outlets (type B)  
Direct air flow to the left or  
right, up or down.  
Turn the knob up to open the  
vent and down to close the  
vent.  
Right and left side outlets  
Direct air flow to the left or  
right, up or down.  
Turn the knob up to open the  
vent and down to close the  
vent.  
Using the automatic mode  
Fan speed is adjusted automatically in accordance with the temperature set-  
ting and ambient conditions. As a result, the following may occur.  
Immediately after  
is pressed, the fan may stop for a while until  
warm or cool air is ready to flow.  
Cool air may flow to the area around the upper body when the heater is  
on.  
Using the recirculated air mode  
The windows will fog up more easily if the recirculated air mode is used for  
an extended period.  
248  
 
 
3-1. Using the air conditioning system and defogger  
Switching between outside air and recirculated air modes  
Recirculated air mode or outside air mode may be automatically switched to  
in accordance with the temperature setting and the inside temperature.  
Window defogger feature  
Recirculated air mode may automatically switch to outside air mode in situa-  
tions where the windows need to be defogged.  
When outside air temperature approaches 0°C (32°F)  
The air conditioning system may not operate even when  
When is selected for the air outlets used  
is pressed.  
For your driving comfort, air flowing to the feet may be warmer than air flow-  
ing to the upper body depending on the temperature setting.  
3
When Eco drive mode is on  
If the outside temperature exceeds a preset temperature, the system will  
switch to recirculated air mode.  
The effectiveness of the air conditioning will be lower than normal.  
The fan speed level drops below the normal rate.  
Air conditioning odors  
During use, various odors from inside and outside the vehicle may enter  
into and accumulate in the air conditioning system. This may then cause  
odor to be emitted from the vents.  
To reduce potential odors from occurring:  
• It is recommended that the air conditioning system be set to outside air  
mode prior to turning the vehicle off.  
• The start timing of the blower may be delayed for a short period of time  
immediately after the air conditioning system is started in automatic  
mode.  
249  
 
 
3-1. Using the air conditioning system and defogger  
CAUTION  
To prevent the windshield from fogging up  
Do not use  
during cool air operation in extremely humid weather.  
The difference between the temperature of the outside air and that of the  
windshield can cause the outer surface of the windshield to fog up, blocking  
your vision.  
NOTICE  
To prevent 12-volt battery discharge  
Do not leave the air conditioning system on longer than necessary when the  
hybrid system is off.  
250  
 
 
3-1. Using the air conditioning system and defogger  
Rear window and outside rear view mirror defoggers  
The rear window defogger is used to defog the rear window. The out-  
side rear view mirror defoggers are used to remove frost, dew or  
raindrops from the outside rear view mirrors.  
On/off  
The defoggers will automati-  
cally turn off after approxi-  
mately 15 minutes.  
3
Outside rear view mirror defoggers (if equipped)  
Turning the rear window defogger on will turn the outside rear view mirror  
defoggers on.  
CAUTION  
Outside rear view mirror defoggers  
The surfaces of the outside rear view mirrors may become hot. To prevent  
burns do not touch the mirrors.  
251  
 
 
3-2. Using the audio system  
Audio system types  
Without “touch screen”  
CD player with changer controller and AM/FM radio  
Title  
Using the radio  
Page  
P. 257  
P. 262  
P. 267  
P. 273  
P. 280  
P. 288  
P. 291  
P. 292  
Using the CD player  
Playing back MP3 and WMA discs  
Operating an iPod  
Operating a USB memory  
Optimal use of the audio system  
Using the AUX port  
Using the steering wheel audio switches  
: If equipped  
252  
 
 
3-2. Using the audio system  
With “touch screen”  
Owners of models equipped with a “touch screen” should refer to  
the ““touch screen” Owner's manual”.  
3
Using cellular phones  
Interference may be heard through the audio system's speakers if a cellular  
phone is being used inside or close to the vehicle while the audio system is  
operating.  
NOTICE  
To prevent 12-volt battery discharge  
Do not leave the audio system on longer than necessary when the hybrid  
system is off.  
To avoid damaging the audio system  
Take care not to spill drinks or other fluids over the audio system.  
253  
 
 
3-2. Using the audio system  
Certification for the “touch screen”  
254  
 
 
3-2. Using the audio system  
3
255  
 
 
3-2. Using the audio system  
256  
 
 
3-2. Using the audio system  
Using the radio  
Power Volume  
Station selector  
TA mode button  
Adjusting the  
frequency  
3
Changing the  
program types  
Automatic presetting  
of radio stations  
AM/FM mode  
AF mode button  
Seeking the frequency  
buttons  
Setting station presets  
Manually  
STEP  
1
Search for desired stations by turning  
or pressing “”  
or “” on  
.
STEP  
2
Press and hold the button (from  
to be set to until you hear a beep.  
to  
) the station is  
: If equipped  
257  
 
 
3-2. Using the audio system  
Automatically  
Press and hold  
until you hear a beep.  
Up to 6 stations are set in order of reception quality. When the settings  
are finished, 2 beeps will be heard.  
In the FM1 or FM2 mode, the stations automatically set by the audio sys-  
tem will be set in the FM3 presets.  
RDS (Radio Data System)  
This feature allows your radio to receive station and program informa-  
tion (classical, news, etc.) from radio stations that broadcast this  
information.  
Listening to stations of the same network  
Press  
.
AF-ON, REG-OFF modes:The station among those of the same  
network with strong reception is  
selected.  
AF-ON, REG-ON modes: The station among those of the same  
network with strong reception and  
broadcasting the same program is  
selected.  
Each time  
is pressed, the mode changes in the order of AF-ON,  
REG-OFFAF-ON, REG-ONAF-OFF, REG-OFF.  
Specifying program type  
Press  
.
Each time  
is pressed, the program type changes in the order of  
“NEWS”“SPORTS”“TALK”“POP”“CLASSICS”.  
258  
 
 
3-2. Using the audio system  
Traffic information  
Press  
.
TP mode: The system automatically switches to traffic information  
when a broadcast with a traffic information signal is  
received.  
The station returns to the previous one when the traffic infor-  
mation ends.  
TA mode: The system automatically switches to traffic information  
when a broadcast with a traffic information signal is  
received. In FM modes, the system will be mute unless  
traffic information is being broadcast.  
The audio system returns to the previous mode when the traf-  
fic information ends.  
3
Traffic information cannot be heard if the hands-free phone  
system is in use.  
The audio system mode changes as follows each time  
pressed.  
is  
FM modes: TPTAOFF  
Modes other than FM modes: TAOFF  
Emergency broadcast reception mode  
“ALARM” appears on the display in the event that an emergency  
broadcast is received, and the emergency broadcast is aired.  
259  
 
 
3-2. Using the audio system  
Certification for the radio (for Italy)  
IL PRODUTTORE Panasonic Corporation Automotive Systems Company  
4261, Ikenobe-cho, Tsuzuki-ku, Yokohama, 224-8520, JAPAN  
DI QUESTO APPARECCHIO MODELLO 86120-02F50 DICHIARA CHE  
ESSO E’CONFORME AL D.M.28.08.1995 Nr.548, OTTEMPERANDO ALLE  
PRESCRIZIONI DI CUI AL D.M.25.6.1985 (PARAGRAFO 3,ALL.A) ED AL  
D.M.27.8.1987 (PARAGRAFO 3,ALL.I)  
IL PRODUTTORE FUJITSU TEN (EUROPE) GmbH, Mündelheimer Weg  
39, 40472 Düsseldorf, Germania DI QUESTO APPARECCHIO MODELLO  
FT0001n DICHIARA CHE ESSO E’CONFORME AL D.M.28.08.1995  
Nr.548, OTTEMPERANDO ALLE PRESCRIZIONI DI CUI AL  
D.M.25.06.1985 (PARAGRAFO 3,ALL.A) ED AL D.M.27.08.1987  
(PARAGRAFO 3,ALL.I.).  
EON (Enhanced Other Network) system (for traffic announcement  
function)  
If the RDS station (with EON data) you are listening to is not broadcasting a  
traffic information program and the audio system is in the TA (traffic  
announcement) mode, the radio will be switched automatically to a station  
broadcasting a traffic information program in the EON AF list when traffic  
information begins.  
When the 12-volt battery is disconnected  
Stations presets are erased.  
Reception sensitivity  
Maintaining perfect radio reception at all times is difficult due to the con-  
tinually changing position of the antenna, differences in signal strength  
and surrounding objects, such as trains, transmitters, etc.  
When  
is used, automatic station selection and automatic regis-  
tering of stations may not be possible.  
The radio antenna is mounted on the rear roof. The antenna can be  
removed from the base by turning it.  
260  
 
 
3-2. Using the audio system  
Digital Audio Broadcast (DAB) radio  
The optional radio antenna and tuner are necessary for the use of Digital  
Audio Broadcast (DAB) radio.  
NOTICE  
To prevent damage, remove the antenna in the following cases.  
The antenna will touch the ceiling of a garage.  
A cover will be put on the roof.  
3
261  
 
 
3-2. Using the audio system  
Using the CD player  
Power Volume  
CD eject  
Selecting a CD  
(with changer only)  
Displays text message  
Random playback  
Repeat play  
Playback  
Selecting a track, fast-forwarding or reversing  
Loading CDs  
Insert a CD.  
Ejecting CDs  
Press  
and remove the CD.  
Selecting a track  
Press “” to move up or “” to move down using  
until the  
desired track number is displayed.  
: If equipped  
262  
 
 
3-2. Using the audio system  
Fast-forwarding and reversing tracks  
To fast-forward or reverse, press and hold “” or “” on  
.
Selecting a CD (CD player with changer only)  
To select the desired CD, press  
() or  
().  
Repeat play  
To repeat a track  
Press  
(RPT).  
3
To repeat all of the tracks on a CD (CD player with changer  
only)  
Press and hold  
(RPT) until you hear a beep.  
Random playback  
Current CD  
Press  
(RAND).  
Tracks are played in a random order until  
is pressed once more.  
All CDs (CD player with changer only)  
Press and hold  
(RAND) until you hear a beep.  
Tracks on all loaded CDs are played in a random order until  
pressed once more.  
is  
Switching the display  
Press  
.
Each time  
is pressed, the display changes in the order of Track  
no./Elapsed timeCD titleTrack name.  
263  
 
 
3-2. Using the audio system  
Display  
Up to 12 characters can be displayed at a time.  
If there are 13 characters or more, pressing and holding  
for 1  
second or more will display the remaining characters.  
A maximum of 24 characters can be displayed.  
If  
is pressed for 1 second or more again or has not been pressed  
for 6 seconds or more, the display will return to the first 12 characters.  
Depending on the contents recorded, the characters may not be displayed  
properly or may not be displayed at all.  
Canceling random and repeat playback  
Press  
(RAND) or  
(RPT) again.  
Error message  
“ERROR”: This indicates a problem either in the CD or inside the player.  
The CD may be dirty, damaged or inserted up-side down.  
Discs that can be used  
Discs with the marks shown below can be used.  
Playback may not be possible depending on recording format or disc fea-  
tures, or due to scratches, dirt or deterioration.  
CDs with copy-protect features may not be used.  
CD player protection feature  
To protect the internal components, playback is automatically stopped when  
a problem is detected while the CD player is being used.  
If a CD is left inside the CD player or in the ejected position for  
extended periods  
The CD may be damaged and may not play properly.  
Lens cleaners  
Do not use lens cleaners. Doing so may damage the CD player.  
264  
 
 
3-2. Using the audio system  
CAUTION  
Certification for the CD player  
This product is a class I laser product.  
A laser beam leak may result in hazardous radiation exposure.  
Do not open the cover of the player or attempt to repair the unit yourself.  
Refer servicing to qualified personnel.  
Laser power: No hazardous  
NOTICE  
CDs and adapters that cannot be used  
3
Do not use the following types of CDs or 8 cm (3 in.) CD adapters or Dual  
Disc.  
Doing so may damage the CD player and/or the CD insert/eject function.  
CDs that have a diameter that is not 12  
cm (4.7 in.)  
Low-quality and deformed CDs  
265  
 
 
3-2. Using the audio system  
NOTICE  
CDs with a transparent or translucent  
recording area  
CDs that have had tape, stickers or CD-  
R labels attached to them, or that have  
had the label peeled off  
CD player precautions  
Failure to follow the precautions below may result in serious damage to the  
CDs or the player itself.  
Do not insert anything other than CDs into the CD slot.  
Do not apply oil to the CD player.  
Store CDs away from direct sunlight.  
Never try to disassemble any part of the CD player.  
266  
 
 
3-2. Using the audio system  
Playing back MP3 and WMA discs  
Selecting a CD  
Power Volume  
Selecting a file  
(with changer only)  
CD eject  
3
Displays text message  
Random playback  
Repeat play  
Playback  
Selecting a file, fast-forwarding or reversing  
Selecting a folder  
Loading and ejecting MP3 and WMA discs  
P. 262  
Selecting a CD (CD player with changer only)  
To select the desired CD, press  
() or  
().  
Selecting a folder  
To select the desired folder, press  
() or  
().  
To return to the first folder, press and hold  
beep.  
() until you hear a  
: If equipped  
267  
 
 
3-2. Using the audio system  
Selecting files  
Turn  
or press “” or “” on  
to select the desired file.  
Fast-forwarding and reversing files  
To fast-forward or reverse, press and hold “” or “” on  
.
Repeat play  
To repeat a file  
Press  
(RPT).  
To repeat all of the files on a folder  
Press and hold  
(RPT) until you hear a beep.  
Random playback  
To play files from a particular folder in random order  
Press  
(RAND).  
To play all of the files on a disc in random order  
Press and hold  
(RAND) until you hear a beep.  
Switching the display  
Press  
.
Each time  
is pressed, the display changes in the order of  
Folder no./File no./Elapsed time Folder name File name Album  
title (MP3 only) Track title Artist name.  
268  
 
 
3-2. Using the audio system  
Display  
Up to 12 characters can be displayed at a time.  
If there are 13 characters or more, pressing and holding  
for 1  
second or more will display the remaining characters.  
A maximum of 24 characters can be displayed.  
If  
is pressed for 1 second or more again or has not been pressed  
for 6 seconds or more, the display will return to the first 12 characters.  
Depending on the contents recorded, the characters may not be displayed  
properly or may not be displayed at all.  
Canceling random and repeat playback  
Press  
Error messages  
“ERROR”:  
(RAND) or  
(RPT) again.  
3
This indicates a problem either in the CD or inside the player.  
The CD may be dirty, damaged or inserted up-side down.  
“NO MUSIC”: This indicates that the MP3/WMA file is not included in the  
CD.  
Discs that can be used  
Discs with the marks shown below can be used.  
Playback may not be possible depending on recording format or disc fea-  
tures, or due to scratches, dirt or deterioration.  
CD player protection feature  
To protect the internal components, playback is automatically stopped when  
a problem is detected while the CD player is being used.  
If a CD is left inside the CD player or in the ejected position for  
extended periods  
The CD may be damaged and may not play properly.  
269  
 
 
3-2. Using the audio system  
Lens cleaners  
Do not use lens cleaners. Doing so may damage the CD player.  
MP3 and WMA files  
MP3 (MPEG Audio LAYER3) is a standard audio compression format.  
Files can be compressed to approximately 1/10 of their original size by using  
MP3 compression.  
WMA (Windows Media Audio) is a Microsoft audio compression format.  
This format compresses audio data to a size smaller than that of the MP3  
format.  
There is a limit to the MP3 and WMA file standards and to the media/formats  
recorded by them that can be used.  
MP3 file compatibility  
• Compatible standards  
MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3)  
• Compatible sampling frequencies  
MPEG1 LAYER3: 32, 44.1, 48 (kHz)  
MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz)  
• Compatible bit rates  
MPEG1 LAYER3: 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps)  
MPEG2 LSF LAYER3: 64, 80, 96, 112, 128, 144, 160 (kbps)  
* Compatible with VBR  
• Compatible channel modes: stereo, joint stereo, dual channel and  
monaural  
WMA file compatibility  
• Compatible standards  
WMA Ver. 7, 8, 9  
• Compatible sampling frequencies  
32, 44.1, 48 (kHz)  
• Compatible bit rates  
Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps)  
Ver. 9: CBR 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps)  
* Only compatible with 2-channel playback  
270  
 
 
3-2. Using the audio system  
Compatible media  
Media that can be used for MP3 and WMA playback are CD-Rs and CD-  
RWs.  
Playback in some instances may not be possible, depending on the status  
of the CD-R or CD-RW. Playback may not be possible or the audio may  
jump if the disc is scratched or marked with fingerprints.  
Compatible disc formats  
The following disc formats can be used.  
• Disc formats: CD-ROM Mode 1 and Mode 2  
CD-ROM XA Mode 2, Form 1 and Form 2  
• File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet)  
MP3 and WMA files written in any format other than those listed above  
may not play correctly, and their file names and folder names may not  
be displayed correctly.  
3
Items related to standards and limitations are as follows.  
• Maximum directory hierarchy: 8 levels  
• Maximum length of folder names/file names: 32 characters  
• Maximum number of folders: 192 (including the root)  
• Maximum number of files per disc: 255  
File names  
The only files that can be recognized as MP3/WMA and played are those  
with the extension .mp3 or .wma.  
Multi-sessions  
As the audio system is compatible with multi-sessions, it is possible to play  
discs that contain MP3 and WMA files. However, only the first session can  
be played.  
ID3 and WMA tags  
ID3 tags can be added to MP3 files, making it possible to record the track  
title, artist name, etc.  
The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags.  
(The number of characters is based on ID3 Ver. 1.0 and 1.1.)  
WMA tags can be added to WMA files, making it possible to record the  
track title and artist name in the same way as with ID3 tags.  
271  
 
 
3-2. Using the audio system  
MP3 and WMA playback  
When a disc containing MP3 or WMA files is inserted, all files on the disc  
are first checked. Once the file check is finished, the first MP3 or WMA file  
is played. To make the file check finish more quickly, we recommend you  
do not write in any files other than MP3 or WMA files or create any unnec-  
essary folders.  
If the discs contain a mixture of music data and MP3 or WMA format data,  
only music data can be played.  
Extensions  
If the file extensions .mp3 and .wma are used for files other than MP3 and  
WMA files, they will be mistakenly recognized and played as MP3 and  
WMA files. This may result in large amounts of interference and damage  
to the speakers.  
Playback  
• To play MP3 files with steady sound quality, we recommend a fixed bit  
rate of 128 kbps and a sampling frequency of 44.1 kHz.  
• CD-R or CD-RW playback may not be possible in some instances,  
depending on the characteristics of the disc.  
• There is a wide variety of freeware and other encoding software for  
MP3 and WMA files on the market, and depending on the status of the  
encoding and the file format, poor sound quality or noise at the start of  
playback may result. In some cases, playback may not be possible at  
all.  
• When files other than MP3 or WMA files are recorded on a disc, it may  
take more time to recognize the disc and in some cases, playback may  
not be possible at all.  
• Microsoft, Windows, and Windows Media are the registered trade-  
marks of Microsoft Corporation in the U.S. and other countries.  
NOTICE  
CDs and adapters that cannot be used (P. 265)  
CD player precautions (P. 266)  
272  
 
 
3-2. Using the audio system  
Operating an iPod  
Connecting an iPod enables you to enjoy music from the vehicle  
speakers.  
Connecting an iPod  
Open the auxiliary box.  
STEP  
1
3
Open the cover and connect  
an iPod using an iPod cable.  
STEP  
2
Turn on the power of the iPod if  
it is not turned on.  
STEP  
3
Close the auxiliary box and press  
.
: If equipped  
273  
 
 
3-2. Using the audio system  
Control panel  
Power Volume  
iPod menu/Song  
selector knob  
Go back button  
Repeat play button  
Text button  
Shuffle playback button  
Playback/Pause button  
Playback button  
Selecting a song, fast-forwarding or reversing  
Selecting a play mode  
STEP  
1
Press  
to select iPod menu mode.  
STEP  
2
Turning  
changes the play mode in the following order:  
“PLAYLISTS”“ARTISTS”“ALBUMS”“SONGS”  
“PODCASTS”“GENRES”“COMPOSERS”  
“AUDIOBOOKS”  
STEP  
3
Press  
to select the desired play mode.  
274  
 
 
3-2. Using the audio system  
Play mode list  
First  
selection  
Second  
selection  
Third  
selection  
Fourth  
selection  
Play mode  
“PLAYLISTS”  
“ARTISTS”  
“ALBUMS”  
“SONGS”  
Playlists  
select  
Songs  
select  
-
-
-
-
-
Albums  
select  
Songs  
select  
Artists select  
Albums  
select  
Songs  
select  
-
-
-
Songs select  
-
Albums  
select  
Songs  
select  
“PODCASTS”  
“GENRES”  
“COMPOSERS”  
“AUDIOBOOKS”  
-
3
Albums  
select  
Songs  
select  
Genre select Artists select  
Composers  
select  
Albums  
select  
Songs  
select  
-
-
Songs  
select  
-
-
Selecting a list  
STEP  
STEP  
STEP  
1
2
3
Turn  
to display the first selection list.  
to select the desired item.  
Press  
Pressing the knob changes to the second selection list.  
Repeat the same procedure to select the desired item.  
To return to the previous selection list, select “GO BACK” or press  
(
).  
275  
 
 
3-2. Using the audio system  
Selecting songs  
Turn  
or press “” or “” on  
to select the desired song.  
Playing and pausing songs  
To play or pause a song, press  
(
).  
Fast-forwarding and reversing songs  
To fast-forward or reverse, press and hold “” or “” on  
.
Shuffle playback  
Playing songs from one playlist or album in random order  
Press (RAND).  
To cancel, press  
(RAND) again.  
Playing songs from all the playlists or albums in random order  
Press and hold  
To cancel, press  
(RAND) until you hear a beep.  
(RAND) again.  
Repeat play  
Press  
(RPT).  
To cancel, press  
(RPT) again.  
276  
 
 
3-2. Using the audio system  
Switching the display  
Press  
.
Each time the button is pressed, the display changes in the following  
order: Elapsed time Album title Track title Artist name  
Adjusting sound quality and volume balance  
STEP  
STEP  
1
2
Press  
to enter iPod menu mode.  
Pressing  
changes sound modes. (P. 288)  
3
About iPod  
Apple is not responsible for the operation of this device or its compliance  
with safety and regulatory standards.  
iPod is a trademark of Apple Inc., registered in the U.S. and other coun-  
tries.  
iPod functions  
When an iPod is connected and the audio source is changed to iPod  
mode, the iPod will resume play from the same point in which it was last  
used.  
Depending on the iPod that is connected to the system, certain functions  
may not be available. If a function is unavailable due to a malfunction (as  
opposed to a system specification), disconnecting the device and recon-  
necting it once again may resolve the problem.  
While connected to the system, the iPod cannot be operated with its own  
controls. It is necessary to use the controls of the vehicle’s audio system  
instead.  
277  
 
 
3-2. Using the audio system  
iPod problems  
To resolve most problems encountered when using your iPod, disconnect  
your iPod from the vehicle iPod connection and reset it.  
For instructions on how to reset your iPod, refer to your iPod Owner’s Man-  
ual.  
Display  
P. 264  
Error messages  
“ERROR”:  
This indicates a problem in the iPod or its connection.  
“NO MUSIC”: This indicates that there is no music data in the iPod.  
“EMPTY”:  
This indicates that some available songs are not found in a  
selected playlist.  
“UPDATE”: This indicates that the version of the iPod is not compatible.  
Upgrade your iPod software to the latest version.  
Compatible models  
Model  
Generation  
5th generation  
Software version  
Ver. 1.2.0 or higher  
Ver. 1.3.0 or higher  
Ver. 1.1.2 or higher  
Ver. 1.0.0 or higher  
Ver. 1.1.0 or higher  
Ver. 1.0.0 or higher  
iPod  
iPod nano  
1st generation  
2nd generation  
3rd generation  
1st generation  
1st generation  
iPod touch  
iPod classic  
Depending on differences between models or software version etc., some  
models listed above might be incompatible with this system.  
iPod 4th generation and earlier models are not compatible with this system.  
iPhone, iPod mini, iPod shuffle and iPod photo are not compatible with this  
system.  
Items related to standards and limitations are as follows:  
Maximum number of lists in device: 9999  
Maximum number of songs in device: 65535  
Maximum number of songs per list: 65535  
278  
 
 
3-2. Using the audio system  
CAUTION  
Caution while driving  
Do not connect iPod or operate the controls.  
NOTICE  
To prevent damage to iPod  
Do not leave iPod in the vehicle. The temperature inside the vehicle may  
become high, resulting in damage to the iPod.  
Do not push down on or apply unnecessary pressure to the iPod while it is  
connected as this may damage the iPod or its terminal.  
Do not insert foreign objects into the port as this may damage the iPod or  
3
its terminal.  
279  
 
 
3-2. Using the audio system  
Operating a USB memory  
Connecting a USB memory enables you to enjoy music from the  
vehicle speakers.  
Connecting a USB memory  
Open the auxiliary box.  
STEP  
1
Open the cover and connect a  
USB memory.  
STEP  
2
Turn on the power of the USB  
memory if it is not turned on.  
STEP  
3
Close the auxiliary box and press  
.
: If equipped  
280  
 
 
3-2. Using the audio system  
Control panel  
Power Volume  
Folder selector buttons  
File selector knob  
Repeat play button  
3
Text button  
Random playback button  
Playback button  
Selecting a file, fast-forwarding or reversing  
Selecting a folder  
Selecting folders one at a time  
Press  
() or  
() to select the desired folder.  
Returning to the first folder  
Press and hold  
() until you hear a beep.  
Selecting files  
Turn  
or press “” or “” on  
to select the desired file.  
281  
 
 
3-2. Using the audio system  
Fast-forwarding and reversing files  
To fast-forward or reverse, press and hold “” or “” on  
.
Random playback  
Playing files from a folder in random order  
Press  
(RAND).  
To cancel, press  
(RAND) again.  
Playing all the files from a USB memory in random order  
Press and hold  
To cancel, press  
(RAND) until you hear a beep.  
(RAND) again.  
Repeat play  
Repeating a file  
Press  
(RPT).  
To cancel, press  
(RPT) again.  
Repeating all the files in a folder  
Press and hold  
To cancel, press  
(RPT) until you hear a beep.  
(RPT) again.  
282  
 
 
3-2. Using the audio system  
Switching the display  
Press  
.
Each time the button is pressed, the display changes in the following  
order: Elapsed time Folder name File name Album title (MP3  
only) Track title Artist name  
USB memory functions  
Depending on the USB memory that is connected to the system, the  
device itself may not be operable and certain functions may not be avail-  
able. If the device is inoperable or a function is unavailable due to a mal-  
function (as opposed to a system specification), disconnecting the device  
and reconnecting it once again may resolve the problem.  
3
If the USB memory still does not begin operation after being discon-  
nected and reconnected, format the memory.  
Display  
P. 264  
Error messages  
“ERROR”:  
This indicates a problem in the USB memory or its con-  
nection.  
“NO SUPPORT”: This indicates that no MP3/WMA files are included in the  
USB memory.  
283  
 
 
3-2. Using the audio system  
USB memory  
Compatible devices  
USB memory that can be used for MP3 and WMA playback  
Compatible device formats  
The following device formats can be used:  
• USB communication formats: USB2.0 FS (12 mbps)  
• File formats: FAT16/32 (Windows)  
• Correspondence class: Mass storage class  
MP3 and WMA files written in any format other than those listed above  
may not play correctly, and their file names and folder names may not be  
displayed correctly.  
Items related to standards and limitations are as follows:  
• Maximum directory hierarchy: 8 levels  
• Maximum number of folders in a device: 999 (including the root)  
• Maximum number of files in a device: 65025  
• Maximum number of files per folder: 255  
MP3 and WMA files  
MP3 (MPEG Audio LAYER 3) is a standard audio compression format.  
Files can be compressed to approximately 1/10 of their original size using  
MP3 compression.  
WMA (Windows Media Audio) is a Microsoft audio compression format.  
This format compresses audio data to a size smaller than that of the MP3  
format.  
There is a limit to the MP3 and WMA file standards that can be used and  
to the media/formats on which the files are recorded.  
284  
 
 
3-2. Using the audio system  
MP3 file compatibility  
• Compatible standards  
MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III,  
MPEG2.5)  
• Compatible sampling frequencies  
MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz)  
MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz)  
MPEG2.5: 8, 11.025, 12 (kHz)  
• Compatible bit rates (compatible with VBR)  
MPEG1 AUDIO LAYERII, III: 32-320 (kbps)  
MPEG2 AUDIO LAYERII, III: 32-160 (kbps)  
MPEG2.5: 32-160 (kbps)  
• Compatible channel modes: stereo, joint stereo, dual channel and  
monaural  
3
WMA file compatibility  
• Compatible standards  
WMA Ver. 9  
• Compatible sampling frequencies  
HIGH PROFILE 32, 44.1, 48 (kHz)  
• Compatible bit rates  
HIGH PROFILE 32-320 (kbps, VBR)  
File names  
The only files that can be recognized as MP3/WMA and played are those  
with the extension .mp3 or .wma.  
ID3 and WMA tags  
ID3 tags can be added to MP3 files, making it possible to record the track  
title, artist name, etc.  
The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3  
tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.)  
WMA tags can be added to WMA files, making it possible to record the  
track title and artist name in the same way as with ID3 tags.  
285  
 
 
3-2. Using the audio system  
MP3 and WMA playback  
• When a device containing MP3 or WMA files is connected, all files in  
the USB memory are checked. Once the file check is finished, the first  
MP3 or WMA file is played. To make the file check finish more quickly,  
we recommend that you do not include any files other than MP3 or  
WMA files or create any unnecessary folders.  
• When the USB memory is connected and the audio source is changed  
to USB memory mode, the USB memory will start playing the first file in  
the first folder. If the same device is removed and reinserted (and the  
contents have not been changed), the USB memory will resume play  
from the same point in which it was last used.  
Extensions  
If the file extensions .mp3 and .wma are used for files other than MP3 and  
WMA files, they will be skipped (not played).  
Playback  
• To play MP3 files with steady sound quality, we recommend a fixed bit  
rate of at least 128 kbps and a sampling frequency of 44.1 kHz.  
• There is a wide variety of freeware and other encoding software for  
MP3 and WMA files on the market, and depending on the status of the  
encoding and the file format, poor sound quality or noise at the start of  
playback may result. In some cases, playback may not be possible at  
all.  
• Microsoft, Windows, and Windows Media are registered trademarks of  
Microsoft Corporation in the U.S.A. and other countries.  
CAUTION  
Caution while driving  
Do not connect USB memory or operate the controls.  
286  
 
 
3-2. Using the audio system  
NOTICE  
If the auxiliary box lid cannot be fully closed  
Depending on the size and shape of the USB memory that is connected to  
the system, the auxiliary box lid may not close fully. In this case, do not forc-  
ibly close the lid as this may damage the USB memory or the terminal, etc.  
To prevent damage to USB memory  
Do not leave USB memory in the vehicle. The temperature inside the vehi-  
cle may become high, resulting in damage to the player.  
Do not push down on or apply unnecessary pressure to the USB memory  
while it is connected as this may damage the USB memory or its terminal.  
Do not insert foreign objects into the port as this may damage the USB  
memory or its terminal.  
3
287  
 
 
3-2. Using the audio system  
Optimal use of the audio system  
Displays the current mode  
Changes the following set-  
ting  
• Sound quality and volume  
balance (P. 289)  
The sound quality and bal-  
ance setting can be changed  
to produce the best sound.  
• Automatic Sound Levelizer  
ON/OFF (P. 289)  
Using the audio control function  
Changing sound quality modes  
Pressing  
order.  
selects the mode to be changed in the following  
“BAS”“TRE”“FAD”“BAL”“ASL”  
: If equipped  
288  
 
 
3-2. Using the audio system  
Adjusting sound quality  
Turning  
adjusts the level.  
Sound qual-  
ity mode  
Mode  
displayed  
Turn to the  
Turn to the  
right  
Level  
left  
Bass*  
“BAS”  
“TRE”  
-5 to 5  
-5 to 5  
Low  
High  
Treble*  
Front/rear  
volume  
balance  
“FAD”  
“BAL”  
F7 to R7  
L7 to R7  
Shifts to rear Shifts to front  
Shifts to left Shifts to right  
Left/right  
volume  
balance  
3
*: The sound quality level is adjusted individually in each audio mode.  
Adjusting the Automatic Sound Levelizer (ASL)  
When ASL is selected, turning  
to the right changes the  
amount of ASL in the order of LOW, MID and HIGH.  
Turning  
to the left turns ASL off.  
ASL automatically adjusts the volume and tone quality to compensate for  
varying noise levels while driving.  
289  
 
 
3-2. Using the audio system  
Trademark owned by SRS Labs, Inc. (vehicles without a hands-free  
phone system)  
The audio systems utilize SRS FOCUSand SRS TruBassaudio  
enhancement technologies, under license from SRS Labs, Inc., in all modes  
except AM radio mode.  
FOCUS, TruBass, SRS and  
Inc.  
symbols are trademarks of SRS Labs,  
FOCUS and TruBass technologies are incorporated under license from  
SRS Labs, Inc.  
290  
 
 
3-2. Using the audio system  
Using the AUX port  
This port can be used to connect a portable audio device and listen  
to it through the vehicle’s speakers.  
Open the auxiliary box.  
STEP  
STEP  
STEP  
1
2
3
Open the cover and connect  
the portable audio device.  
3
Close the auxiliary box and press  
.
Operating portable audio devices connected to the audio system  
The volume can be adjusted using the vehicle's audio controls. All other  
adjustments must be made on the portable audio device itself.  
When using a portable audio device connected to the power outlet  
Noise may occur during playback. Use the power source of the portable  
audio device.  
: If equipped  
291  
 
 
3-2. Using the audio system  
Using the steering wheel audio switches  
Some audio features can be controlled using the switches on the  
steering wheel.  
Volume  
Radio mode: Select radio  
stations  
CD mode: Select tracks,  
files (MP3 and WMA) and  
discs  
®
Bluetooth audio mode (if  
equipped): Selects a track  
and album  
iPod mode (if equipped):  
Selects a song  
USB memory mode (if  
equipped): Selects a file  
and folder  
Power on, select audio  
source  
Turning on the power  
Press  
when the audio system is turned off.  
The audio system can be turned off by holding  
hear a beep.  
down until you  
: If equipped  
292  
 
 
3-2. Using the audio system  
Changing the audio source  
Press  
when the audio system is turned on. The audio source  
changes as follows each time  
is pressed.  
1
AMFM1FM2FM3CD modeCD changer mode*   
Bluetooth audio mode* AUXiPod or USB memory mode*  
AM  
®
2
2
*1: If installed with a CD changer  
*2: If equipped  
Adjusting the volume  
3
Press “+” on  
volume.  
to increase the volume and “-” to decrease the  
Hold down “+” or “-” on  
volume.  
to continue increasing or decreasing the  
Selecting a radio station  
STEP  
STEP  
1
2
Press  
to select the radio mode.  
Press “” or “” on  
to select a preset station.  
To scan for receivable stations, press and hold “” or “” on  
until you hear a beep.  
Selecting a track/file or song  
®
STEP  
1
2
Press  
memory mode.  
to select CD, Bluetooth audio, iPod or USB  
STEP  
Press “” or “” on  
to select the desired track/file or  
song.  
293  
 
 
3-2. Using the audio system  
Selecting an album  
®
STEP  
STEP  
1
2
Press  
to select Bluetooth audio mode.  
until you hear a beep.  
Press and hold “” or “” on  
Selecting a folder (CD player without changer)  
STEP  
STEP  
1
2
Press  
to select CD or USB memory mode.  
until you hear a beep.  
Press and hold “” or “” on  
Selecting a disc in the CD player (CD player with changer only)  
STEP  
STEP  
1
2
Press  
to select the CD mode.  
until you hear a beep.  
Press and hold “” or “” on  
CAUTION  
To reduce the risk of an accident  
Exercise care when operating the audio switches on the steering wheel.  
294  
 
 
®
3-3. Using the Bluetooth audio system  
®
Bluetooth audio system  
The Bluetooth® audio system enables you to enjoy music played on  
a portable digital audio player (portable player) from the vehicle  
speakers via wireless communication.  
This audio system supports Bluetooth®, a wireless data system  
capable of playing portable audio music without cables. If your por-  
table player does not support Bluetooth®, the Bluetooth® audio sys-  
tem will not function.  
Title  
Page  
P. 299  
P. 302  
P. 304  
P. 308  
Using the Bluetooth® audio system  
Operating a Bluetooth® enabled portable player  
Setting up a Bluetooth® enabled portable player  
Bluetooth® audio system setup  
3
Conditions under which the system will not operate  
If using a portable player that does not support Bluetooth®  
If the portable player is switched off  
If the portable player is not connected  
If the portable player’s battery is low  
If the portable player is behind the seat or in the glove box or console box  
If metal is covering or touching the portable player  
: If equipped  
295  
 
 
®
3-3. Using the Bluetooth audio system  
When transferring ownership of the vehicle  
Be sure to initialize the system to prevent personal data from being improp-  
erly accessed. (P. 329)  
About Bluetooth®  
Bluetooth is a registered trademark of  
Bluetooth SIG. Inc.  
Compatible models  
Bluetooth® specifications:  
Ver. 1.1, or higher (recommended: Ver. 1.2)  
Following Profiles:  
• A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher (Con-  
formed: Ver. 1.2)  
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Con-  
formed: Ver. 1.3)  
Portable players must correspond to the above specifications in order to be  
connected to the Bluetooth® audio system. However, please note that some  
functions may be limited depending on the type of portable player.  
296  
 
 
®
3-3. Using the Bluetooth audio system  
Certification for the Bluetooth® audio system  
3
297  
 
 
®
3-3. Using the Bluetooth audio system  
CAUTION  
Caution while driving  
Do not connect portable players or operate the controls.  
NOTICE  
To prevent damage to portable players  
Do not leave portable players in the vehicle. The temperature inside the  
vehicle may become high, resulting in damage to the player.  
298  
 
 
®
3-3. Using the Bluetooth audio system  
®
Using the Bluetooth audio system  
Audio unit  
Display  
A message, name, number,  
etc. is displayed.  
Lower-case characters and  
special characters cannot  
be displayed.  
Displays information that is  
too long to be displayed at  
one time on the display  
(press and hold)  
Selects items such as menu  
and number  
3
Turn: Selects an item  
Press: Inputs the selected  
item  
®
Bluetooth connection con-  
dition  
If “BT” is not displayed, the  
Bluetooth® audio system  
cannot be used.  
Microphone  
: If equipped  
299  
 
 
®
3-3. Using the Bluetooth audio system  
Using the Bluetooth® audio system for the first time  
®
Before using the Bluetooth audio system, it is necessary to register  
®
a Bluetooth enabled portable player in the system. Follow the proce-  
dure below to register (pair) a portable player:  
STEP  
STEP  
1
Press  
Press  
until “BTA” is displayed.  
and select “Setup” using  
2
.
STEP  
STEP  
3
4
Select “Pair Audio” using  
.
Select “Record Name” using  
registered after the beep.  
, and say the name to be  
The name to be registered will be repeated aloud.  
STEP  
STEP  
5
6
Select “Confirm” using  
.
A passkey will be displayed.  
Input the passkey into the audio player.  
Refer to the manual that comes with the portable player for the oper-  
ation of the portable player.  
®
If the portable player has a Bluetooth phone, the phone can be reg-  
istered at the same time. (P. 316)  
300  
 
 
®
3-3. Using the Bluetooth audio system  
Menu list of the Bluetooth® audio system  
Normal operation  
First menu  
Second menu  
“Pair Audio”  
Operation detail  
Registering a portable  
player  
Selecting a portable  
player to be used  
“Select Audio”  
Changing the registered  
name of a portable  
player  
“Change Name”  
“Setup”  
Listing the registered  
portable players  
“List Audios”  
“Set Passkey”  
“Delete Audio”  
3
Changing the passkey  
Deleting a registered  
portable player  
Operations that cannot be performed while driving  
Operating the system with  
Registering a portable player to the system  
Changing the passkey  
P. 307  
301  
 
 
®
3-3. Using the Bluetooth audio system  
Operating a Bluetooth® enabled portable player  
Power Volume  
Album selector buttons  
Selector knob  
Selecting a  
track, fast-  
forwarding  
or reversing  
Playback button  
Playback/Pause button  
Text button  
Selecting an album  
Press  
() or  
().  
Selecting tracks  
Press “” or “” on  
.
Playing and pausing tracks  
Press ).  
(
: If equipped  
302  
 
 
®
3-3. Using the Bluetooth audio system  
Fast-forwarding and reversing tracks  
To fast-forward or reverse, press and hold “” or “” on  
.
Switching the display  
Press  
.
Each time  
is pressed, the display changes in the following  
order: Track title Track title/Artist name Track title/Album name   
Track title/Elapsed time  
3
Using the steering wheel audio switches  
P. 292  
Bluetooth® audio system functions  
Depending on the portable player that is connected to the system, certain  
functions may not be available.  
Error messages  
“BT AUDIO ERROR”: This indicates a problem in the system.  
303  
 
 
®
3-3. Using the Bluetooth audio system  
Setting up a Bluetooth® enabled portable player  
Registering a portable player in the Bluetooth® audio system allows  
the system to function. The following functions can be used for reg-  
istered portable players:  
Functions and operation procedures  
STEP  
1
Press  
until “BTA” is displayed.  
STEP  
2
Press  
and select “Setup” using  
.
STEP  
3
Select one of the following functions using  
.
Registering a portable player  
“Pair Audio”  
Selecting a portable player to be used  
“Select Audio”  
Changing the registered name  
“Change Name”  
Listing the registered portable players  
“List Audios”  
Changing the passkey  
“Set Passkey”  
Deleting a registered portable player  
“Delete Audio”  
: If equipped  
304  
 
 
®
3-3. Using the Bluetooth audio system  
Registering a portable player  
Select “Pair Audio” using  
, and perform the procedure for reg-  
istering a portable player. (P. 300)  
Selecting a portable player to be used  
STEP  
STEP  
1
2
Select “Select Audio” using  
Select the portable player to be used, and select “Confirm”  
using  
.
3
.
STEP  
3
Select “From Car” or “From Audio”, and select “Confirm” using  
.
If “From Car” is selected, the portable player will be automatically  
connected whenever the “POWER” switch is in the ACCESSORY or  
ON mode.  
305  
 
 
®
3-3. Using the Bluetooth audio system  
Changing the registered name of a portable player  
STEP  
STEP  
1
2
Select “Change Name” using  
.
Select the name of the portable player to be changed using  
.
STEP  
STEP  
3
4
Select “Record Name” using  
after the beep.  
, and say the new name  
The name to be registered will be repeated aloud.  
Select “Confirm” using  
.
Listing the registered portable players  
Select “List Audios” using  
. The list of registered portable play-  
ers will be read aloud.  
When listing is complete, the system returns to “Setup”.  
306  
 
 
®
3-3. Using the Bluetooth audio system  
Changing the passkey  
STEP  
STEP  
1
2
Select “Set Passkey” using  
.
Select a 4 to 8-digit number using  
.
The number should be input 1 digit at a time.  
STEP  
3
When the entire number to be registered as a passkey has  
been input, press again.  
If the number to be registered has 8 digits, pressing of the knob is  
not necessary.  
3
Deleting a registered portable player  
STEP  
STEP  
1
2
Select “Delete Audio” using  
Select the portable player to be deleted and select “Confirm”  
using  
.
.
®
If the portable player to be deleted is paired as a Bluetooth phone,  
the registration of the mobile phone can be deleted at the same time.  
A voice guidance instruction to delete a mobile phone is heard.  
The number of portable players that can be registered  
Up to 2 portable players can be registered in the system.  
307  
 
 
®
3-3. Using the Bluetooth audio system  
®
Bluetooth audio system setup  
System setup items and operation procedures  
P. 327  
: If equipped  
308  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Hands-free phone system (for cellular phone) features  
This system supports Bluetooth®, which allows you to make or  
receive calls without using cables to connect a cellular phone and  
the system, and without operating the cellular phone.  
Hands-free system quick guide  
STEP  
STEP  
1
2
Setting a cellular phone. (P. 314)  
Adding an entry to the phonebook (Up to 20 names can be  
stored). (P. 331)  
STEP  
3
Dialing by inputting a name. (P. 320)  
3
: If equipped  
309  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Title  
Page  
Using the hands-free phone system  
Using the hands-free phone system for  
the first time  
P. 314  
Menu list of the hands-free phone  
system  
Making a phone call  
Dialing by inputting a name  
Speed dialing  
When receiving a phone call  
Transferring a call  
P. 320  
Using the call history memory  
Setting a cellular phone  
Registering a cellular phone  
Selecting the cellular phone to be used  
Changing a registered name  
Listing the registered cellular phones  
Deleting a cellular phone  
P. 323  
Changing the passkey  
Turning the hands-free phone  
automatic connection on/off  
Security and system setup  
Setting or changing the PIN  
Locking or unlocking the phone book  
Setting playback volume  
Displaying the Bluetooth® device  
address and name  
P. 327  
P. 331  
Initialization  
Using the phone book  
Adding a new phone number  
Setting speed dials  
Changing a registered name  
Deleting registered data  
Deleting speed dials  
Listing the registered data  
310  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Conditions affecting operation  
The hands-free phone system may not operate normally in the following situ-  
ations:  
The cellular phone is turned off, or located outside the service area.  
The cellular phone has a low battery.  
The cellular phone is not connected to the system.  
The cellular phone is behind the seat or in the glove box, or metal mate-  
rial covers or touches the phone.  
When transferring ownership of the vehicle  
Be sure to initialize the system to prevent personal data from being improp-  
erly accessed.  
3
Required profiles for the cellular phone  
HFP (Hands Free Profile) Ver. 1.0 or higher (Conformed: Ver. 1.5)  
OPP (Object Push Profile) Ver. 1.1  
About Bluetooth®  
Bluetooth is a registered trademark of  
Bluetooth SIG. Inc.  
311  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Certification for the hands-free phone system  
312  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
CAUTION  
Caution while driving  
Do not use a cellular phone, or connect the Bluetooth® phone.  
NOTICE  
To prevent damage to a cellular phone  
Do not leave a cellular phone in the vehicle. The temperature inside may  
become high resulting in damage to the phone.  
3
313  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Using the hands-free phone system (for cellular phone)  
Audio unit  
Display  
A message, name, phone  
number, etc. is displayed.  
Lower-case characters and  
special characters cannot be  
displayed.  
Displays information that is  
too long to be displayed at  
one time on the display  
(press and hold)  
Selects speed dials  
Selects items such as menu  
or number  
Turn: Selects an item  
Press: Inputs the selected  
item  
®
Bluetooth connection con-  
dition and reception level  
If “BT” is not displayed, the  
hands-free phone system  
cannot be used.  
: If equipped  
314  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Steering wheel  
Volume  
The voice guidance volume  
cannot be adjusted using  
this button.  
On-hook switch  
Turns the hands-free sys-  
tem off/ends a call/refuses a  
call  
Off-hook switch  
Turns the hands-free sys-  
tem on/starts a call  
3
Talk switch  
Turns the voice command  
system on (press)/turns the  
voice command system off  
(press and hold)  
Microphone  
315  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Using the hands-free phone system for the first time  
Before using the hands-free phone system, it is necessary to register  
a cellular phone in the system. The phone registration mode will be  
entered automatically when starting the system with no cellular  
phone registered. Follow the procedure below to register a cellular  
phone:  
STEP  
1
Press the off-hook switch or the talk switch.  
STEP  
2
Select “Pair Phone” using  
.
STEP  
STEP  
3
4
Select “Record Name” using  
registered after the beep.  
, and say the name to be  
The name to be registered will be repeated aloud.  
Select “Confirm” using  
.
Registration to the hands-free phone system only  
STEP  
5
Select “Phone Only” using  
.
®
Registration to the hands-free phone system and Bluetooth audio  
system at the same time  
STEP  
5
Select “Int. Audio” using  
A passkey will be displayed.  
.
STEP  
6
Input the passkey into the cellular phone.  
Refer to the manual that comes with the cellular phone for the oper-  
ation of the phone.  
316  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Menu list of the hands-free phone system  
Normal operation  
Second  
First menu  
Third menu  
-
Operation detail  
menu  
Dialing a number stored in  
the incoming call history  
memory  
“Callback”  
“Redial”  
-
-
Dialing a number stored in  
the outgoing call history  
memory  
-
“Add  
Entry”  
-
-
-
-
-
-
Adding a new number  
3
“Change  
Name”  
Changing a name in the  
phone book  
“Delete  
Entry”  
Deleting the phone book  
data  
“Phonebook”  
“Del Spd  
Dial”  
Deleting a registered speed  
dial  
“List  
Names”  
Listing the phone book data  
Registering a speed dial  
“Speed  
Dial”  
317  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Second  
menu  
First menu  
Third menu  
“Set PIN”  
Operation detail  
Setting a PIN code  
“Security”  
“Phbk Lock”  
Locking the phone book  
Unlocking the phone book  
“Phbk Unlock”  
Registering the cellular  
phone to be used  
“Pair Phone”  
Changing a registered name  
of a cellular phone  
“Change Name”  
“Delete Phone”  
“List Phones”  
Deleting a registered cellular  
phone  
“Phone  
Setup”  
Listing the registered cellular  
phones  
“Setup”  
Selecting a cellular phone to  
be used  
“Select Phone”  
“Set Passkey”  
Changing the passkey  
“Hands-free  
power”  
Setting a Hands-free power  
on/off  
“Playback Vol”  
“Device Name”  
“Initialize”  
Setting playback volume  
“System  
Setup”  
Displaying a device informa-  
tion  
Initialization  
318  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Automatic volume adjustment  
When vehicle speed is 80 km/h (50 mph) or more, the volume automatically  
increases. The volume returns to the previous volume setting when vehicle  
speed drops to 70 km/h (43 mph) or less.  
When using a voice command  
For numbers, say a combination of single digits from zero to nine, # (pound),  
(star), and + (plus).  
Say a command correctly and clearly.  
Situations that the system may not recognize your voice  
When driving on a rough road  
When driving at high speeds  
3
When air is blowing out of the vents onto the microphone  
When the air conditioning fan emits a loud noise  
Operations that cannot be performed while driving  
Operating the system with  
Registering a cellular phone to the system  
Changing the passkey  
P. 325  
319  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Making a phone call  
Making a phone call  
Dialing by inputting a name  
Speed dialing  
Dialing a number stored in the outgoing history memory  
“Redial”  
Dialing a number stored in the incoming history memory  
“Call back”  
Receiving a phone call  
Answering the phone  
Refusing the call  
Transferring a call  
Using the call history memory  
Dialing  
Storing data in the phone book  
Deleting  
Dialing by inputting a name  
STEP  
1
Press the talk switch and say a registered name after the  
beep.  
The desired name or number is displayed.  
STEP  
2
Dial by one of the following methods:  
a. Press the off-hook switch.  
b. Select “Dial” using  
.
: If equipped  
320  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Speed dialing  
STEP  
STEP  
1
2
Press the off-hook switch.  
Press the preset button in which the desired number is regis-  
tered.  
STEP  
3
Press the off-hook switch.  
When receiving a phone call  
Answering the phone  
Press the off-hook switch.  
Refusing the call  
3
Press the on-hook switch.  
Transferring a call  
A call can be transferred between the cellular phone and system  
while dialing, receiving a call, or during a call. Use one of the follow-  
ing methods:  
a. Operate the cellular phone.  
Refer to the manual that comes with the cellular phone for the oper-  
ation of the phone.  
b. Press the off-hook switch*.  
*: This operation can be performed only when transferring a call  
from the cellular phone to the system during a call.  
321  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Using the call history memory  
Follow the procedure below to use a number stored in the call history  
memory:  
STEP  
1
Press the off-hook switch and select “Redial” (when using a  
number stored in the outgoing call history memory) or “Call  
back” (when using a number stored in the incoming call his-  
tory memory) using  
.
STEP  
STEP  
2
3
Select the desired number using  
.
The following operations can be performed:  
Dialing: Press the off-hook switch or select “Dial” using  
Storing the number in the phone book: Select “Store” and then  
“Confirm” using  
.
.
Deleting: Select “Delete” and then “Confirm” using  
.
Call history  
Up to 5 numbers can be stored in each of the outgoing and incoming call his-  
tory memories.  
When talking on the phone  
Do not talk simultaneously with the other party.  
Keep the volume of the received voice down. Otherwise, voice echo will  
increase.  
322  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Setting a cellular phone  
Registering a cellular phone in the hands-free phone system allows  
the system to function. The following functions can be used for reg-  
istered cellular phones:  
Functions and operation procedures  
To enter the menu for each function, follow the steps below using  
:
Registering a cellular phone  
1. “Setup” 2. “Phone Setup” 3. “Pair Phone”  
Selecting the cellular phone to be used  
3
1. “Setup” 2. “Phone Setup” 3. “Select Phone”  
Changing a registered name  
1. “Setup” 2. “Phone Setup” 3. “Change Name”  
Listing the registered cellular phones  
1. “Setup” 2. “Phone Setup” 3. “List Phones”  
Deleting a cellular phone  
1. “Setup” 2. “Phone Setup” 3. “Delete Phone”  
Changing the passkey  
1. “Setup” 2. “Phone Setup” 3. “Set Passkey”  
Turning the hands-free phone automatic connection on/off  
1. “Setup” 2. “Phone Setup” 3. “Hands-free power”  
Registering a cellular phone  
Select “Pair Phone” using  
, and do the procedure for register-  
ing a cellular phone. (P. 316)  
: If equipped  
323  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Selecting the cellular phone to be used  
STEP  
STEP  
1
2
Select “Select Phone” using  
Select the cellular phone to be used and select “Confirm”  
using  
.
.
Changing a registered name  
STEP  
STEP  
STEP  
1
2
3
Select “Change Name” using  
.
Select the cellular phone name to be changed using  
.
Select “Record Name” using  
after the beep.  
, and say the new name  
The name to be registered will be repeated aloud.  
STEP  
4
Select “Confirm” using  
.
324  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Listing the registered cellular phones  
Selecting “List Phones” using  
lular phones to be read aloud.  
causes the list of registered cel-  
When listing is complete, the system returns to “Phone Setup”.  
Deleting a cellular phone  
STEP  
STEP  
1
2
Select “Delete Phone” using  
Select the cellular phone to be deleted and select “Confirm”  
using  
.
3
.
Changing the passkey  
STEP  
STEP  
1
2
Select “Set Passkey” using  
.
Select a 4 to 8-digit number using  
.
The number should be input 1 digit at a time.  
STEP  
3
When the entire number to be registered as a passkey has  
been input, press again.  
If the number to be registered has 8 digits, pressing of the knob is  
not necessary.  
325  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Turning the hands-free phone automatic connection on/off  
Turning off the automatic connection  
STEP  
1
2
Select “Hands-free power” using  
.
.
STEP  
Select “Turn off” using  
.
Turning on the automatic connection  
STEP  
STEP  
1
2
Select “Hands-free power” using  
Select “Turn on” using  
.
The number of cellular phones that can be registered  
Up to 6 cellular phones can be registered in the system.  
326  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Security and system setup  
To enter the menu of each setting, follow the steps below using  
:
Security setting items and operation procedures  
Setting or changing the PIN (Personal Identification Number)  
1. “Setup” 2. “Security” 3. “Set PIN”  
Locking the phone book  
1. “Setup” 2. “Security” 3. “Phbk Lock”  
Unlocking the phone book  
1. “Setup” 2. “Security” 3. “Phbk Unlock”  
3
System setup items and operation procedures  
Setting playback volume  
1. “Setup” 2. “System Setup” 3. “Playback Vol”  
®
Displaying the Bluetooth device address and name  
1. “Setup” 2. “System Setup” 3. “Device Name”  
Initialization  
1. “Setup” 2. “System Setup” 3. “Initialize”  
Setting or changing the PIN  
Setting a PIN  
STEP  
STEP  
1
2
Select “Set PIN” using  
.
Enter a PIN using  
.
Input the code 1 digit at a time.  
: If equipped  
327  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Changing the PIN  
STEP  
STEP  
STEP  
1
2
3
Select “Set PIN” using  
.
Enter the registered PIN using  
.
Enter a new PIN using  
.
Input the code 1 digit at a time.  
Locking or unlocking the phone book  
STEP  
STEP  
1
2
Select “Phbk Lock” or “Phbk Unlock” using  
.
Input the PIN and select “Confirm” using  
Input the code 1 digit at a time.  
.
Setting playback volume  
STEP  
STEP  
1
2
Select “Playback Vol” using  
Change the playback volume.  
.
To decrease the volume: Turn  
To increase the volume: Turn  
counterclockwise.  
clockwise.  
328  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
®
Displaying the Bluetooth device address and name  
STEP  
STEP  
1
2
Select “Device Name” using  
.
®
Turn  
to display the Bluetooth device address and  
name.  
STEP  
3
Select “Go Back” using  
to return to “System Setup”.  
Initialization  
3
STEP  
STEP  
1
2
Select “Initialize” and then “Confirm” using  
.
Select “Confirm” again using  
.
329  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Initialization  
The following data in the system can be initialized:  
• Phone book  
• Outgoing and incoming call history  
• Speed dials  
• Registered cellular phone data  
• Security code  
• Registered Bluetooth® enabled portable player data  
• Passkeys for the cellular phones  
• Passkey for the Bluetooth® audio players  
• Playback volume  
• Receiver volume  
• Ring tone volume  
Once the initialization has been completed, the data cannot be restored  
to its original state.  
When the phone book is locked  
The following functions cannot be used:  
Dialing by inputting a name  
Speed dialing  
Dialing a number stored in the call history memory  
Using the phone book  
330  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Using the phone book  
To enter the menu of each setting, follow the steps below using  
:
Adding a new phone number  
1. “Phonebook” 2. “Add Entry”  
Setting speed dial  
1. “Phonebook” 2. “Speed Dial”  
Changing a registered name  
1. “Phonebook” 2. “Change Name”  
Deleting registered data  
3
1. “Phonebook” 2. “Delete Entry”  
Deleting speed dial  
1. “Phonebook” 2. “Del Spd Dial”  
Listing the registered data  
1. “Phonebook” 2. “List Names”  
Adding a new phone number  
The following methods can be used to add a new phone number:  
Transferring data from the cellular phone  
Inputting a phone number using  
Selecting a phone number from outgoing or incoming call history  
: If equipped  
331  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Adding procedure  
STEP  
STEP  
1
2
Select “Add Entry” using  
.
Use one of the following methods to input a telephone num-  
ber:  
Transferring data from the cellular phone  
STEP2-1 Select “By Phone” and then “Confirm” using  
STEP2-2 Transfer the data from the cellular phone.  
.
Refer to the manual that comes with the cellular phone for  
the details of transferring data.  
STEP2-3 Select the desired data using  
.
Inputting a phone number using  
STEP2-1 Select “Manual Input” using  
.
STEP2-2 Input a phone number using  
once again.  
, and press  
Input the phone number 1 digit at a time.  
332  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Selecting a phone number from outgoing or incoming call history  
STEP2-1 Select “Call History” using  
.
STEP2-2 Select “Outgoing” or “Incoming” using  
.
STEP2-3 Select the desired data using  
.
STEP  
3
Select “Record Name” using  
name after the beep.  
, and say the desired  
3
The name to be registered will be repeated aloud.  
STEP  
STEP  
4
5
Select “Confirm” using  
.
Select “Confirm” again using  
.
STEP  
5
In  
, selecting “Speed Dial” instead of “Confirm” registers the  
newly added phone number as a speed dial.  
333  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Setting speed dials  
STEP  
1
Select “Speed Dial” using  
.
STEP  
STEP  
2
3
Select the desired data using  
.
Select the desired preset button, and register the data into  
speed dial by either of the following methods:  
a. Press the desired preset button, and select “Confirm” using  
.
b. Press and hold the desired preset button.  
Changing a registered name  
STEP  
STEP  
STEP  
1
2
3
Select “Change Name” using  
.
Select the desired name to be changed using  
.
Select “Record Name” using  
after the beep.  
and say the new name  
The name to be registered will be repeated aloud.  
STEP  
4
Select “Confirm” using  
.
334  
 
 
3-4. Using the hands-free phone system (for cellular phone)  
Deleting registered data  
STEP  
STEP  
1
2
Select “Delete Entry” using  
.
Select the desired data to be deleted, and select “Confirm”  
using  
.
Deleting speed dials  
STEP  
STEP  
1
2
Select “Del Spd Dial” using  
.
3
Press the preset button in which the desired speed dial is reg-  
istered, and select “Confirm” using  
.
Listing the registered data  
Select “List Names” using  
be read aloud.  
. The list of the registered data will  
When listing is complete, the system returns to “Phonebook”.  
Pressing the off-hook switch while an entry is being read aloud  
selects the entry and calls the registered phone number.  
Limitation of number of digits  
A phone number that exceeds 24 digits cannot be registered.  
335  
 
 
3-5. Using the interior lights  
Interior lights list  
Interior light (P. 337)  
Personal lights (P. 338)  
“POWER” switch light  
Shift lever light (if equipped)  
336  
 
 
3-5. Using the interior lights  
Interior light  
Illuminated entry system  
When the interior light switch is in the “DOOR” position, the interior light and  
“POWER” switch light automatically turn on/off according to “POWER”  
switch mode, the presence of the electronic key, whether the doors are  
locked/unlocked and whether the doors are open/closed.  
To prevent the 12-volt battery from being discharged  
If the interior light and “POWER” switch light remain on when the door is not  
fully closed and the interior light switch is in the “DOOR” position, the lights  
will go off automatically after 20 minutes.  
Customization that can be configured at any authorized Toyota dealer  
or repairer, or another duly qualified and equipped professional  
Settings (e.g. The time elapsed before lights turn off) can be changed.  
(Customizable features P. 506)  
3
Interior light  
On  
Off  
Door position  
337  
 
 
3-5. Using the interior lights  
Personal lights  
Personal lights  
On/off  
338  
 
 
3-6. Using the storage features  
List of storage features  
3
Auxiliary boxes  
Cup holders  
Glove box  
Console box  
CAUTION  
Items that should not left in the storage space  
Do not leave glasses, lighters or spray cans in the storage spaces, as this  
may cause the following when cabin temperature becomes high:  
Glasses may be deformed by heat or cracked if they come into contact  
with other stored items.  
Lighters or spray cans may explode. If they come into contact with other  
stored items, the lighter may catch fire or the spray can may release gas,  
causing a fire hazard.  
339  
 
 
3-6. Using the storage features  
Glove box and console box  
Glove box  
Pull up the lever.  
CAUTION  
Caution while driving  
Keep the glove box closed.  
Injuries may result in the event of an accident or sudden braking.  
Console box  
Lift the lid while pulling the lever.  
CAUTION  
Caution while driving  
Keep the console box closed.  
Injuries may result in the event of an accident or sudden braking.  
340  
 
 
3-6. Using the storage features  
Cup holders  
Cup holders  
Push on the lid.  
CAUTION  
3
Items unsuitable for the cup holder  
Do not place anything other than cups or aluminum cans in the cup holders.  
Other items may be thrown out of the holders in the event of an accident or  
sudden braking and cause injury. If possible, cover hot drinks to prevent  
burns.  
When not in use  
Keep the cup holders closed.  
Injuries may result in the event of an accident or sudden braking.  
341  
 
 
3-6. Using the storage features  
Auxiliary boxes  
Auxiliary boxes  
Type A  
Pull up the lever.  
Type B (if equipped)  
Push the lid.  
CAUTION  
Caution while driving  
Keep the auxiliary boxes closed.  
Injuries may result in the event of an accident or sudden braking.  
Items unsuitable for storing (type B only)  
Do not store items heavier than 0.2 kg (0.4 lb.).  
Doing so may cause the holder to open and the items inside may fall out,  
resulting in an accident.  
342  
 
 
3-7. Other interior features  
Sun visors  
Forward position:  
Flip down.  
Side position:  
Flip down, unhook, and  
swing to the side.  
3
343  
 
 
3-7. Other interior features  
Vanity mirrors  
Slide the cover.  
The light turns on when the  
cover is opened.  
344  
 
 
3-7. Other interior features  
Clock  
Press and hold the “CLOCK”  
button to allow the hour indica-  
tion to flash.  
STEP  
1
STEP  
STEP  
2
3
Press the “CLOCK” button to adjust the hours while the  
hour indication is flashing.  
After adjusting the hours, wait 5 seconds to allow the minute indi-  
cation to flash.  
3
Press the “CLOCK” button to adjust the minutes while the  
minutes indication is flashing.  
After adjusting the minutes, wait 5 seconds to return the clock  
automatically to display the time.  
The clock is displayed when  
The “POWER” switch is in ON mode.  
When the 12-volt battery is disconnected  
The time display will automatically be set to 0:00.  
345  
 
 
3-7. Other interior features  
Portable ashtray  
The ashtray can be installed in  
a cup holder. (P. 341)  
CAUTION  
When not in use  
Keep the ashtray closed.  
Injuries may result in the event of sudden braking, sudden swerving or an  
accident.  
To prevent fire  
Fully extinguish matches and cigarettes before putting them in the ashtray,  
then make sure the ashtray is fully closed.  
Do not place paper or any other type of flammable object in the ashtray.  
: If equipped  
346  
 
 
3-7. Other interior features  
Cigarette lighter  
Type A  
Push the cigarette lighter  
down.  
The cigarette lighter will pop up  
when it is ready for use.  
Type B  
Push the center of the ciga-  
rette lighter down.  
3
The center of the cigarette  
lighter will pop up when it is  
ready for use.  
The cigarette lighter can be used when  
The “POWER” switch is in ACCESSORY or ON mode.  
: If equipped  
347  
 
 
3-7. Other interior features  
CAUTION  
To avoid burns or fires  
Do not touch the metal parts of the cigarette lighter.  
Do not hold the cigarette lighter down. It could overheat and cause a fire.  
Type A only: Do not put any items on the center console because it may  
cause the cigarette lighter to be pushed down unintentionally. It could  
overheat or cause a fire.  
Do not insert anything other than the cigarette lighter or Toyota genuine  
compressor power plug (if equipped) into the outlet.  
348  
 
 
3-7. Other interior features  
Power outlet  
The power outlet can be used for 12 V accessories that run on less  
than 10 A.  
3
The power outlet can be used when  
The “POWER” switch is in ACCESSORY or ON mode.  
NOTICE  
To avoid damaging the power outlet  
Close the power outlet lid when the power outlet is not in use.  
Foreign objects or liquids that enter the power outlet may cause a short cir-  
cuit.  
To prevent the fuse from being blown  
Do not use an accessory that uses more than 12 V 10 A.  
To prevent 12-volt battery discharge  
Do not use the power outlets longer than necessary when the hybrid system  
is not operating.  
: If equipped  
349  
 
 
3-7. Other interior features  
Seat heaters  
Heats the left front seat  
Heats the right front seat  
The indicator light comes on.  
The seat heaters can be used when  
The “POWER” switch is in ON mode.  
When not in use  
Turn the seat heater off. The indicator light turns off.  
CAUTION  
Burns  
Use caution when seating the following persons in a seat with the seat  
heater on to avoid the possibility of burns:  
• Babies, small children, the elderly, the sick and the disabled  
• Persons with sensitive skin  
• Persons who are fatigued  
• Persons who have taken alcohol or drugs that induce sleep (sleeping  
drugs, cold remedies, etc.)  
Do not cover the seat with anything when using the seat heater.  
Using the seat heater with a blanket or cushion increases the temperature  
of the seat and may lead to overheating.  
: If equipped  
350  
 
 
3-7. Other interior features  
NOTICE  
To prevent seat heater damage  
Do not put unevenly weighted objects on the seat and do not stick sharp  
objects (needles, nails, etc.) into the seat.  
To prevent 12-volt battery discharge  
Turn the switches off when the hybrid system is not operating.  
3
351  
 
 
3-7. Other interior features  
Floor mat  
Use only floor mats designed specifically for vehicles of the same  
model and model year as your vehicle. Fix them securely in place  
onto the carpet.  
Fix the floor mat in place using  
the retaining hooks (clips) pro-  
vided.  
The shape of the retaining  
hooks (clips) and the fixing pro-  
cedure of the floor mat for your  
vehicle may differ from those  
shown in the illustration. For  
details, refer to the floor mat  
retention clip installation instruc-  
tions supplied with the clips.  
CAUTION  
Observe the following precautions.  
Failure to do so may cause the driver's floor mat to slip, possibly interfering  
with the pedals while driving. An unexpectedly high speed may result or it may  
become difficult to stop the vehicle, leading to a serious accident.  
When installing the driver's floor mat  
Do not use floor mats designed for other models or different model year  
vehicles, even if they are Toyota Genuine floor mats.  
Only use floor mats designed for the driver's seat.  
Always install the floor mat securely using the retaining hooks (clips) provided.  
Do not use two or more floor mats on top of each other.  
Do not place the floor mat bottom-side up or upside-down.  
Before driving  
Check that the floor mat is securely  
fixed in the correct place with all the  
provided retaining hooks (clips). Be  
especially careful to perform this check  
after cleaning the floor.  
With the hybrid system stopped and the  
P position illuminated on the shift posi-  
tion indicator, fully depress each pedal  
to the floor to make sure it does not  
interfere with the floor mat.  
352  
 
 
3-7. Other interior features  
Luggage compartment features  
Luggage undertray (type A)  
Luggage undertray (type B)  
3
353  
 
 
3-7. Other interior features  
Removing the luggage cover (if equipped)  
Unhook the cords.  
Remove the cover from the anchors.  
The cover can be removed by pulling it in the direction of the arrow labeled  
“A”.  
If this does not work, pull the cover in the direction labeled “B”.  
NOTICE  
Luggage mat  
To avoid deformation of the luggage mat, observe the following:  
Do not place small, heavy objects (more than 5 kg [11 lb.]) on the luggage  
mat. Put them in the undertray.  
When loading large objects, make sure to balance the weight of the  
objects evenly over the luggage undertray separators.  
Do not press hard against the luggage mat.  
354  
 
 

Related Topics

Using the air conditioning system and defogger
Using the audio system
Using the Bluetooth? audio system
Using the hands-free phone system (for cellular phone)
Using the interior lights
Using the storage features
Other interior features

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

Twelfth Generation (2018-2026) Toyota Corolla 4 Door Twelfth Generation (2018-2026) Toyota Corolla 4 Door
Ninth Generation (2007-2012) Toyota Corolla 4 Door Ninth Generation (2007-2012) Toyota Corolla 4 Door
Fourth Generation (2021-2026) Toyota Yaris 4 Door Fourth Generation (2021-2026) Toyota Yaris 4 Door
Third Generation (2011-2020) Toyota Yaris 4 Door Third Generation (2011-2020) Toyota Yaris 4 Door
Second Generation (2006-2011) Toyota Yaris 4 Door Second Generation (2006-2011) Toyota Yaris 4 Door
First Generation (1999-2005) Toyota Yaris 4 Door First Generation (1999-2005) Toyota Yaris 4 Door