Get Interior features -> Using the hands-free phone system (for cellular phone) Guide for Toyota Auris 4 Door First Generation (2006-2012)

3-4. Using the hands-free phone system (for cellular phone)



Hands-free phone system (for cellular phone) features

This system supports Bluetooth^®, which allows you to make or

receive calls without using cables to connect a cellular phone and

the system, and without operating the cellular phone.

 Hands-free system quick guide

STEP

1

2

Setting a cellular phone. (P. 314)

Adding an entry to the phonebook (Up to 20 names can be

stored). (P. 331)

STEP

3

Dialing by inputting a name. (P. 320)

3

: If equipped

309

3-4. Using the hands-free phone system (for cellular phone)

Title

Page

Using the hands-free phone system

Using the hands-free phone system for

the first time

P. 314

Menu list of the hands-free phone

system

Making a phone call

Dialing by inputting a name

Speed dialing

When receiving a phone call

Transferring a call

P. 320

Using the call history memory

Setting a cellular phone

Registering a cellular phone

Selecting the cellular phone to be used

Changing a registered name

Listing the registered cellular phones

Deleting a cellular phone

P. 323

Changing the passkey

Turning the hands-free phone

automatic connection on/off

Security and system setup

Setting or changing the PIN

Locking or unlocking the phone book

Setting playback volume

Displaying the Bluetooth^®device

address and name

P. 327

P. 331

Initialization

Using the phone book

Adding a new phone number

Setting speed dials

Changing a registered name

Deleting registered data

Deleting speed dials

Listing the registered data

310

3-4. Using the hands-free phone system (for cellular phone)

Conditions affecting operation

The hands-free phone system may not operate normally in the following situ-

ations:

 The cellular phone is turned off, or located outside the service area.

 The cellular phone has a low battery.

 The cellular phone is not connected to the system.

 The cellular phone is behind the seat or in the glove box, or metal mate-

rial covers or touches the phone.

When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp-

erly accessed.

3

Required profiles for the cellular phone

 HFP (Hands Free Profile) Ver. 1.0 or higher (Conformed: Ver. 1.5)

 OPP (Object Push Profile) Ver. 1.1

About Bluetooth^®

Bluetooth is a registered trademark of

Bluetooth SIG. Inc.

311

3-4. Using the hands-free phone system (for cellular phone)

Certification for the hands-free phone system

312

3-4. Using the hands-free phone system (for cellular phone)

CAUTION

Caution while driving

Do not use a cellular phone, or connect the Bluetooth^®phone.

NOTICE

To prevent damage to a cellular phone

Do not leave a cellular phone in the vehicle. The temperature inside may

become high resulting in damage to the phone.

3

313

3-4. Using the hands-free phone system (for cellular phone)

Using the hands-free phone system (for cellular phone)



 Audio unit

Display

A message, name, phone

number, etc. is displayed.

Lower-case characters and

special characters cannot be

displayed.

Displays information that is

too long to be displayed at

one time on the display

(press and hold)

Selects speed dials

Selects items such as menu

or number

Turn: Selects an item

Press: Inputs the selected

item

®

Bluetooth connection con-

dition and reception level

If “BT” is not displayed, the

hands-free phone system

cannot be used.

: If equipped

314

3-4. Using the hands-free phone system (for cellular phone)

 Steering wheel

Volume

The voice guidance volume

cannot be adjusted using

this button.

On-hook switch

Turns the hands-free sys-

tem off/ends a call/refuses a

call

Off-hook switch

Turns the hands-free sys-

tem on/starts a call

3

Talk switch

Turns the voice command

system on (press)/turns the

voice command system off

(press and hold)

 Microphone

315

3-4. Using the hands-free phone system (for cellular phone)

Using the hands-free phone system for the first time

Before using the hands-free phone system, it is necessary to register

a cellular phone in the system. The phone registration mode will be

entered automatically when starting the system with no cellular

phone registered. Follow the procedure below to register a cellular

phone:

STEP

1

Press the off-hook switch or the talk switch.

STEP

2

Select “Pair Phone” using

.

STEP

3

4

Select “Record Name” using

registered after the beep.

, and say the name to be

The name to be registered will be repeated aloud.

Select “Confirm” using

.

Registration to the hands-free phone system only

STEP

5

Select “Phone Only” using

.

®

Registration to the hands-free phone system and Bluetooth audio

system at the same time

STEP

5

Select “Int. Audio” using

A passkey will be displayed.

.

STEP

6

Input the passkey into the cellular phone.

Refer to the manual that comes with the cellular phone for the oper-

ation of the phone.

316

3-4. Using the hands-free phone system (for cellular phone)

Menu list of the hands-free phone system

 Normal operation

Second

First menu

Third menu

-

Operation detail

menu

Dialing a number stored in

the incoming call history

memory

“Callback”

“Redial”

-

Dialing a number stored in

the outgoing call history

memory

-

“Add

Entry”

-

Adding a new number

3

“Change

Name”

Changing a name in the

phone book

“Delete

Entry”

Deleting the phone book

data

“Phonebook”

“Del Spd

Dial”

Deleting a registered speed

dial

“List

Names”

Listing the phone book data

Registering a speed dial

“Speed

Dial”

317

3-4. Using the hands-free phone system (for cellular phone)

Second

menu

First menu

Third menu

“Set PIN”

Operation detail

Setting a PIN code

“Security”

“Phbk Lock”

Locking the phone book

Unlocking the phone book

“Phbk Unlock”

Registering the cellular

phone to be used

“Pair Phone”

Changing a registered name

of a cellular phone

“Change Name”

“Delete Phone”

“List Phones”

Deleting a registered cellular

phone

“Phone

Setup”

Listing the registered cellular

phones

“Setup”

Selecting a cellular phone to

be used

“Select Phone”

“Set Passkey”

Changing the passkey

“Hands-free

power”

Setting a Hands-free power

on/off

“Playback Vol”

“Device Name”

“Initialize”

Setting playback volume

“System

Setup”

Displaying a device informa-

tion

Initialization

318

3-4. Using the hands-free phone system (for cellular phone)

Automatic volume adjustment

When vehicle speed is 80 km/h (50 mph) or more, the volume automatically

increases. The volume returns to the previous volume setting when vehicle

speed drops to 70 km/h (43 mph) or less.

When using a voice command

For numbers, say a combination of single digits from zero to nine, # (pound),

 (star), and + (plus).

Say a command correctly and clearly.

Situations that the system may not recognize your voice

 When driving on a rough road

 When driving at high speeds

3

 When air is blowing out of the vents onto the microphone

 When the air conditioning fan emits a loud noise

Operations that cannot be performed while driving

 Operating the system with

 Registering a cellular phone to the system

Changing the passkey

P. 325

319

3-4. Using the hands-free phone system (for cellular phone)



Making a phone call

 Making a phone call

 Dialing by inputting a name

 Speed dialing

 Dialing a number stored in the outgoing history memory

“Redial”

 Dialing a number stored in the incoming history memory

“Call back”

 Receiving a phone call

 Answering the phone

 Refusing the call

 Transferring a call

 Using the call history memory

 Dialing

 Storing data in the phone book

 Deleting

Dialing by inputting a name

STEP

1

Press the talk switch and say a registered name after the

beep.

The desired name or number is displayed.

STEP

2

Dial by one of the following methods:

a. Press the off-hook switch.

b. Select “Dial” using

.

: If equipped

320

3-4. Using the hands-free phone system (for cellular phone)

Speed dialing

STEP

1

2

Press the off-hook switch.

Press the preset button in which the desired number is regis-

tered.

STEP

3

Press the off-hook switch.

When receiving a phone call

 Answering the phone

Press the off-hook switch.

 Refusing the call

3

Press the on-hook switch.

Transferring a call

A call can be transferred between the cellular phone and system

while dialing, receiving a call, or during a call. Use one of the follow-

ing methods:

a. Operate the cellular phone.

Refer to the manual that comes with the cellular phone for the oper-

ation of the phone.

b. Press the off-hook switch*.

*: This operation can be performed only when transferring a call

from the cellular phone to the system during a call.

321

3-4. Using the hands-free phone system (for cellular phone)

Using the call history memory

Follow the procedure below to use a number stored in the call history

memory:

STEP

1

Press the off-hook switch and select “Redial” (when using a

number stored in the outgoing call history memory) or “Call

back” (when using a number stored in the incoming call his-

tory memory) using

.

STEP

2

3

Select the desired number using

.

The following operations can be performed:

Dialing: Press the off-hook switch or select “Dial” using

Storing the number in the phone book: Select “Store” and then

“Confirm” using

.

Deleting: Select “Delete” and then “Confirm” using

.

Call history

Up to 5 numbers can be stored in each of the outgoing and incoming call his-

tory memories.

When talking on the phone

 Do not talk simultaneously with the other party.

 Keep the volume of the received voice down. Otherwise, voice echo will

increase.

322

3-4. Using the hands-free phone system (for cellular phone)



Setting a cellular phone

Registering a cellular phone in the hands-free phone system allows

the system to function. The following functions can be used for reg-

istered cellular phones:

 Functions and operation procedures

To enter the menu for each function, follow the steps below using

:

 Registering a cellular phone

1. “Setup”  2. “Phone Setup”  3. “Pair Phone”

 Selecting the cellular phone to be used

3

1. “Setup”  2. “Phone Setup”  3. “Select Phone”

 Changing a registered name

1. “Setup”  2. “Phone Setup”  3. “Change Name”

 Listing the registered cellular phones

1. “Setup”  2. “Phone Setup”  3. “List Phones”

 Deleting a cellular phone

1. “Setup”  2. “Phone Setup”  3. “Delete Phone”

 Changing the passkey

1. “Setup”  2. “Phone Setup”  3. “Set Passkey”

 Turning the hands-free phone automatic connection on/off

1. “Setup”  2. “Phone Setup”  3. “Hands-free power”

Registering a cellular phone

Select “Pair Phone” using

, and do the procedure for register-

ing a cellular phone. (P. 316)

: If equipped

323

3-4. Using the hands-free phone system (for cellular phone)

Selecting the cellular phone to be used

STEP

1

2

Select “Select Phone” using

Select the cellular phone to be used and select “Confirm”

using

.

Changing a registered name

STEP

1

2

3

Select “Change Name” using

.

Select the cellular phone name to be changed using

.

Select “Record Name” using

after the beep.

, and say the new name

The name to be registered will be repeated aloud.

STEP

4

Select “Confirm” using

.

324

3-4. Using the hands-free phone system (for cellular phone)

Listing the registered cellular phones

Selecting “List Phones” using

lular phones to be read aloud.

causes the list of registered cel-

When listing is complete, the system returns to “Phone Setup”.

Deleting a cellular phone

STEP

1

2

Select “Delete Phone” using

Select the cellular phone to be deleted and select “Confirm”

using

.

3

.

Changing the passkey

STEP

1

2

Select “Set Passkey” using

.

Select a 4 to 8-digit number using

.

The number should be input 1 digit at a time.

STEP

3

When the entire number to be registered as a passkey has

been input, press again.

If the number to be registered has 8 digits, pressing of the knob is

not necessary.

325

3-4. Using the hands-free phone system (for cellular phone)

Turning the hands-free phone automatic connection on/off

 Turning off the automatic connection

STEP

1

2

Select “Hands-free power” using

.

STEP

Select “Turn off” using

.

 Turning on the automatic connection

STEP

1

2

Select “Hands-free power” using

Select “Turn on” using

.

The number of cellular phones that can be registered

Up to 6 cellular phones can be registered in the system.

326

3-4. Using the hands-free phone system (for cellular phone)



Security and system setup

To enter the menu of each setting, follow the steps below using

:

 Security setting items and operation procedures

 Setting or changing the PIN (Personal Identification Number)

1. “Setup”  2. “Security”  3. “Set PIN”

 Locking the phone book

1. “Setup”  2. “Security”  3. “Phbk Lock”

 Unlocking the phone book

1. “Setup”  2. “Security”  3. “Phbk Unlock”

3

 System setup items and operation procedures

 Setting playback volume

1. “Setup”  2. “System Setup”  3. “Playback Vol”

®

 Displaying the Bluetooth device address and name

1. “Setup”  2. “System Setup”  3. “Device Name”

 Initialization

1. “Setup”  2. “System Setup”  3. “Initialize”

Setting or changing the PIN

 Setting a PIN

STEP

1

2

Select “Set PIN” using

.

Enter a PIN using

.

Input the code 1 digit at a time.

: If equipped

327

3-4. Using the hands-free phone system (for cellular phone)

 Changing the PIN

STEP

1

2

3

Select “Set PIN” using

.

Enter the registered PIN using

.

Enter a new PIN using

.

Input the code 1 digit at a time.

Locking or unlocking the phone book

STEP

1

2

Select “Phbk Lock” or “Phbk Unlock” using

.

Input the PIN and select “Confirm” using

Input the code 1 digit at a time.

.

Setting playback volume

STEP

1

2

Select “Playback Vol” using

Change the playback volume.

.

To decrease the volume: Turn

To increase the volume: Turn

counterclockwise.

clockwise.

328

3-4. Using the hands-free phone system (for cellular phone)

®

Displaying the Bluetooth device address and name

STEP

1

2

Select “Device Name” using

.

®

Turn

to display the Bluetooth device address and

name.

STEP

3

Select “Go Back” using

to return to “System Setup”.

Initialization

3

STEP

1

2

Select “Initialize” and then “Confirm” using

.

Select “Confirm” again using

.

329

3-4. Using the hands-free phone system (for cellular phone)

Initialization

 The following data in the system can be initialized:

• Phone book

• Outgoing and incoming call history

• Speed dials

• Registered cellular phone data

• Security code

• Registered Bluetooth^®enabled portable player data

• Passkeys for the cellular phones

• Passkey for the Bluetooth^®audio players

• Playback volume

• Receiver volume

• Ring tone volume

 Once the initialization has been completed, the data cannot be restored

to its original state.

When the phone book is locked

The following functions cannot be used:

 Dialing by inputting a name

 Speed dialing

 Dialing a number stored in the call history memory

 Using the phone book

330

3-4. Using the hands-free phone system (for cellular phone)



Using the phone book

To enter the menu of each setting, follow the steps below using

:

 Adding a new phone number

1. “Phonebook”  2. “Add Entry”

 Setting speed dial

1. “Phonebook”  2. “Speed Dial”

 Changing a registered name

1. “Phonebook”  2. “Change Name”

 Deleting registered data

3

1. “Phonebook”  2. “Delete Entry”

 Deleting speed dial

1. “Phonebook”  2. “Del Spd Dial”

 Listing the registered data

1. “Phonebook”  2. “List Names”

Adding a new phone number

The following methods can be used to add a new phone number:

 Transferring data from the cellular phone

 Inputting a phone number using

 Selecting a phone number from outgoing or incoming call history

: If equipped

331

3-4. Using the hands-free phone system (for cellular phone)

 Adding procedure

STEP

1

2

Select “Add Entry” using

.

Use one of the following methods to input a telephone num-

ber:

Transferring data from the cellular phone

STEP2-1 Select “By Phone” and then “Confirm” using

STEP2-2 Transfer the data from the cellular phone.

.

Refer to the manual that comes with the cellular phone for

the details of transferring data.

STEP2-3 Select the desired data using

.

Inputting a phone number using

STEP2-1 Select “Manual Input” using

.

STEP2-2 Input a phone number using

once again.

, and press

Input the phone number 1 digit at a time.

332

3-4. Using the hands-free phone system (for cellular phone)

Selecting a phone number from outgoing or incoming call history

STEP2-1 Select “Call History” using

.

STEP2-2 Select “Outgoing” or “Incoming” using

.

STEP2-3 Select the desired data using

.

STEP

3

Select “Record Name” using

name after the beep.

, and say the desired

3

The name to be registered will be repeated aloud.

STEP

4

5

Select “Confirm” using

.

Select “Confirm” again using

.

STEP

5

In

, selecting “Speed Dial” instead of “Confirm” registers the

newly added phone number as a speed dial.

333

3-4. Using the hands-free phone system (for cellular phone)

Setting speed dials

STEP

1

Select “Speed Dial” using

.

STEP

2

3

Select the desired data using

.

Select the desired preset button, and register the data into

speed dial by either of the following methods:

a. Press the desired preset button, and select “Confirm” using

.

b. Press and hold the desired preset button.

Changing a registered name

STEP

1

2

3

Select “Change Name” using

.

Select the desired name to be changed using

.

Select “Record Name” using

after the beep.

and say the new name

The name to be registered will be repeated aloud.

STEP

4

Select “Confirm” using

.

334

3-4. Using the hands-free phone system (for cellular phone)

Deleting registered data

STEP

1

2

Select “Delete Entry” using

.

Select the desired data to be deleted, and select “Confirm”

using

.

Deleting speed dials

STEP

1

2

Select “Del Spd Dial” using

.

3

Press the preset button in which the desired speed dial is reg-

istered, and select “Confirm” using

.

Listing the registered data

Select “List Names” using

be read aloud.

. The list of the registered data will

When listing is complete, the system returns to “Phonebook”.

Pressing the off-hook switch while an entry is being read aloud

selects the entry and calls the registered phone number.

Limitation of number of digits

A phone number that exceeds 24 digits cannot be registered.

335

Interior features -> Using the hands-free phone system (for cellular phone) for Your Toyota Auris 4 Door First Generation (2006-2012)

Related Topics

Interior features

Popular Owner Manuals

Latest Owner Manuals