Get Instrument cluster Guide for Toyota Auris 4 Door Second Generation (2013-2018)

91

Instrument cluster

2

2.

Instrument cluster

Warning lights and

indicators ...........................92

Gauges and meters .............98

Multi-information display

(3-ring meter)...................101

Multi-information display

(2-ring meter)...................107

Fuel consumption

information.......................118

92

2. Instrument cluster

Warning lights and indicators

The warning lights and indicators on the instrument cluster and

center panel inform the driver of the status of the vehicle’s vari-

ous systems.

For the purpose of explanation, the following illustration dis-

plays all warning lights and indicators illuminated.

X 3-ring meter

X 2-ring meter

The units used on the speedometer and some indicators may differ

depending on the target region.

93

2. Instrument cluster

Warning lights

Warning lights inform the driver of malfunctions in the indicated vehi-

cle’s systems.

1

*

Brake system warning

Speed limiter indicator

light (→P. 539)

(→P. 540)

(Yellow)

(if equipped)

1

*

Charging system warn-

2

Slip indicator (→P. 541)

ing light (→P. 539)

(if equipped)

1

1, 2

*

Low engine oil pressure

PCS warning light

warning light (→P. 539)

(→P. 541)

(if equipped)

1

1, 2

*

High engine coolant

Stop & Start cancel indi-

cator (→P. 541)

temperature

light (→P. 539)

warning

(if equipped)

1

*

Malfunction

indicator

Fuel filter warning light

lamp (→P. 540)

(→P. 542)

(if equipped)

1

*

SRS warning light

Low engine oil level

(→P. 540)

warning light (→P. 542)

(if equipped)

1

*

ABS warning light

Engine

oil

change

(→P. 540)

reminder light (→P. 542)

(if equipped)

1

*

Electric power steering

system warning light

(→P. 540)

DPF system warning

light (→P. 542)

(if equipped)

Cruise control indicator

(→P. 540)

Open door warning light

(→P. 543)

(Yellow)

(if equipped)

94

2. Instrument cluster

3

4

*

Rear passengers’ seat

belt reminder lights

(→P. 543)

Smart entry & start sys-

tem indicator (→P. 213)

(Green)

(if equipped)

1

*

Smart entry & start sys-

Tire pressure warning

tem indicator (→P. 543)

light (→P. 544)

(Yellow)

(if equipped)

1

*

Low fuel level warning

Master warning light

light (→P. 543)

(→P. 544)

(if equipped)

Driver’s and front pas-

senger’s

seat

belt

reminder light (→P. 543)

*¹: These lights, except those shown on the multi-information display, turn on

when the engine switch is turned to the “ON” position (vehicles without a

smart entry & start system) or IGNITION ON mode (vehicles with a smart

entry & start system) to indicate that a system check is being performed.

They will turn off after the engine is started, or after a few seconds. There

may be a malfunction in a system if a light does not come on, or turn off.

Have the vehicle inspected by any authorized Toyota dealer or repairer, or

another duly qualified and equipped professional.

*²: The light flashes to indicate a malfunction.

*³: The light flashes quickly to indicate that the steering lock has not been

released.

*⁴: This light illuminates on the center panel.

95

2. Instrument cluster

Indicators

The indicators inform the driver of the operating state of the vehicle’s

various systems.

LDA (Lane Departure

Turn signal indicator

Alert) indicator

(→P. 231)

(→P. 268)

(if equipped)

Toyota parking

assist-sensor indicator

(→P. 305)

Tail light indicator

(→P. 233)

2

(if equipped)

Headlight high beam

indicator (→P. 233)

Simple-IPA indicator

(→P. 312)

1

*

Automatic High Beam

“TRC OFF” indicator

indicator (→P. 273)

(→P. 330)

(if equipped)

1, 2

*

Front fog light indicator

(→P. 239)

Slip indicator

(→P. 330)

1

*

Rear fog light indicator

VSC OFF indicator

(→P. 239)

(→P. 330)

1

*

Cruise control indicator

PCS warning light

(→P. 296)

(→P. 255)

(Green)

(if equipped)

1

*

Cruise control “SET”

Stop & Start indicator

indicator (→P. 296)

(→P. 283)

(if equipped)

1

*

Speed limiter indicator

Stop & Start cancel indi-

(→P. 301)

cator (→P. 283)

(Green)

(if equipped)

96

2. Instrument cluster

1, 3

*

Gear Shift Indicator

Engine preheating indi-

(→P. 229)

cator (→P. 209, 213)

(if equipped)

4

*

Gear Shift Indicator

Smart entry & start sys-

(→P. 229)

tem indicator (→P. 213)

(Green)

(if equipped)

1, 5

*

7

*

Eco Driving Indicator

Low outside tempera-

Light (→P. 105, 115)

ture indicator (→P. 98)

(if equipped)

6

1, 6

*

Security indicator

“PASSENGER

AIR

(→P. 75, 87)

BAG” indicator (→P. 52)

“SPORT” indicator

(→P. 224)

(if equipped)

*¹: These lights, except those shown on the multi-information display, turn on

when the engine switch is turned to the “ON” position (vehicles without a

smart entry & start system) or IGNITION ON mode (vehicles with a smart

entry & start system) to indicate that a system check is being performed.

They will turn off after the engine is started, or after a few seconds. There

may be a malfunction in a system if a light does not come on, or turn off.

Have the vehicle inspected by any authorized Toyota dealer or repairer, or

another duly qualified and equipped professional.

*²: The light flashes to indicate that the system is operating.

*³: Vehicles with a 3-ring meter

*⁴: Vehicles with a 2-ring meter

*⁵: The light does not turn on when the system is disabled.

*⁶: This light illuminates on the center panel.

*⁷: When the outside temperature is approximately 3°C (37°F) or lower, the

indicator will flash for approximately 10 seconds, then stay on.

97

2. Instrument cluster

WARNING

■If a safety system warning light does not come on

Should a safety system light such as the ABS and SRS warning light not

come on when you start the engine, this could mean that these systems are

not available to help protect you in an accident, which could result in death

or serious injury. Have the vehicle inspected by any authorized Toyota

dealer or repairer, or another duly qualified and equipped professional

immediately if this occurs.

2

98

2. Instrument cluster

Gauges and meters

X 3-ring meter

X 2-ring meter

99

2. Instrument cluster

Tachometer

1

2

3

Displays the engine speed in revolutions per minute.

Speedometer

Displays the vehicle speed.

Outside temperature

Displays the outside temperature within the range of -40°C (-40°F) to 50°C

(122°F).

2-ring meter: Low outside temperature indicator comes on when the ambi-

ent temperature is 3°C (37°F) or lower.

2

Shift position and gear position indicator (if equipped)

→P. 223

4

5

6

Fuel gauge

Displays the quantity of fuel remaining in the tank.

Engine coolant temperature gauge

Displays the engine coolant temperature.

3-ring meter (vehicles with a Multidrive): When the average fuel economy

is displayed, the Eco Driving Indicator zone display (→P. 105) will be dis-

played instead of the engine coolant temperature gauge.

Multi-information display

→P. 101, 107

7

8

Display change switch

Changes the item displayed on the multi-information display.

The “DISP” switch on the steering wheel can also be used to change the

item displayed on the multi-information display.

100

2. Instrument cluster

■The meters and display illuminate when

X Vehicles without a smart entry & start system

The engine switch is in the “ON” position.

X Vehicles with a smart entry & start system

The engine switch is in IGNITION ON mode.

■Outside temperature display

●In the following situations, the correct outside temperature may not be dis-

played, or the display may take longer than normal to change.

• When stopped, or driving at low speeds (less than 15 km/h [9 mph])

• When the outside temperature has changed suddenly (at the entrance/

exit of a garage, tunnel, etc.)

●If “− −” is displayed continuously, the system may be malfunctioning. Take

your vehicle to any authorized Toyota dealer or repairer, or another duly

qualified and equipped professional.

NOTICE

■To prevent damage to the engine and its components

●Do not let the indicator needle of the tachometer enter the red zone, which

indicates the maximum engine speed.

●In the following situations, the engine may be overheating. In this case,

immediately stop the vehicle in a safe place, and check the engine after it

has cooled completely. (→P. 598)

• 3-ring meter: The high engine coolant temperature warning light comes

on

• 2-ring meter: The engine coolant temperature gauge enters the red

zone

101

2. Instrument cluster

Multi-information display (3-ring meter)

Display content

The multi-information display presents the driver with a variety of driv-

ing-related data, such as the current outside temperature.

● Engine coolant temperature

gauge (→P. 98)

● Outside temperature (→P. 98)

● Shift position and gear position

indicator (if equipped)

(→P. 223)

2

● Trip information/Drive informa-

tion/Meter light control

(→P. 102)

Displays the following items:

• Odometer

• Trip meter

• Stop & Start system operation time (if equipped)

• Stop & Start system total operation time (if equipped)

• Average fuel consumption

• Driving range

• Meter light control

● Display customization (→P. 104)

• Eco Driving Indicator Light (if equipped)

• Stop & Start system operation time (if equipped)

102

2. Instrument cluster

Trip information/Drive information/Meter light control

◆ Changing the display

To change the displayed item,

press the display change switch

or the “DISP” switch.

Each time the switch is pressed,

the displayed item will be

changed.

◆ Display items

■ Odometer

“

” will be displayed.

Displays the total distance the vehicle has been driven.

■ Trip meter A/trip meter B

“

”/“

” will be displayed.

Displays the distance the vehicle has been driven since the meter

was last reset. Trip meters A and B can be used to record and dis-

play different distances independently.

To reset, display the desired trip meter and press and hold the display

change switch or the “DISP” switch.

■ Stop & Start system operation time (if equipped)

“

” will be displayed.

Displays the amount of time the engine was stopped due to the

operation of the Stop & Start system during the current trip (from

when the engine was started until it is turned off).

■ Stop & Start system total operation time (if equipped)

“

” will be displayed.

Displays the total amount of time that the engine has been stopped

due to the operation of the Stop & Start system since the meter was

last reset.

To reset, display the Stop & Start system total operation time and press

and hold the display change switch or the “DISP” switch.

103

2. Instrument cluster

■ Average fuel consumption

” will be displayed.

“

Displays the average fuel consumption since the function was

reset.

• To reset, display the average fuel consumption and press and hold the

display change switch or the “DISP” switch.

• Vehicles with a Multidrive: When the display is changed to the average

fuel economy display, the Eco Driving Indicator zone display (→P. 105)

will be displayed instead of the engine coolant temperature gauge.

• Use the displayed average fuel consumption as a reference.

2

■ Driving range

“

” will be displayed.

Displays the estimated maximum distance that can be driven with

the quantity of fuel remaining.

• This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

• When only a small amount of fuel is added to the tank, the display may

not be updated.

• When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

■ Meter light control display

Displays the meter light control display.

• The meter light control display can only be displayed when the tail lights

are on.

• The brightness of the meters can only be adjusted when the tail lights

are on.

• To adjust the brightness, display the meter light control display and

press and hold the display change switch or the “DISP” switch.

104

2. Instrument cluster

Display customization

The following display items can be customized:

◆ Customizable items

■ Eco Driving Indicator Light (if equipped)

Can be enabled or disabled

■ Stop & Start system operation time pop-up display (if

equipped)

Current Stop & Start system operation time can be enabled or dis-

abled.

◆ Customizing the display

To change to the customizing mode screen, display the odometer

1

and then press and hold the display change switch or the “DISP”

switch for 5 seconds or more.

To change the setting, press the display change switch or the

2

“DISP” switch.

Each time the switch is pressed, the setting will be changed.

After customization, press the display change switch or “DISP”

switch for 2 seconds or more to return to the odometer.

105

2. Instrument cluster

■Eco Driving Indicator (if equipped)

Eco Driving Indicator Light

1

During Eco-friendly acceleration (Eco

driving), the Eco Driving Indicator Light

will turn on. When the acceleration

exceeds the Zone of Eco driving, or

when the vehicle is stopped, the light

turns off.

Eco Driving Indicator Zone Display

2

Suggests the Zone of Eco driving with

current Eco driving ratio based on

acceleration.

2

Eco driving ratio based on acceleration

3

If the acceleration exceeds the Zone of Eco driving, the right side of the

Eco Driving Indicator Zone Display blinks and the Eco Driving Indicator

light will turn off.

Zone of Eco driving

4

Eco Driving Indicator will not operate under the following conditions:

●The shift lever is in any position other than D.

●A paddle shift switch (if equipped) is operated.

●Sport mode is selected.

●The vehicle speed is approximately 130 km/h (80 mph) or higher.

■Stop & Start system operation time pop-up display (if equipped)

When enabled (→P. 104), the current Stop & Start system operation time will

be displayed on the multi-information display.

106

2. Instrument cluster

■Brightness of the meters

When the tail lights are turned on, the brightness will be reduced slightly

unless the meters are set to the maximum brightness level.

■When disconnecting and reconnecting battery terminals

The following information data will be reset:

●Average fuel consumption

●Driving range

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

WARNING

■Caution for use while driving

●When operating the multi-information display while driving, pay extra

attention to the safety of the area around the vehicle.

●Do not look continuously at the multi-information display while driving as

you may fail to see pedestrians, objects on the road, etc. ahead of the

vehicle.

■The display at low temperatures

Allow the interior of the vehicle to warm up before using the display. At

extremely low temperatures, the display monitor may respond slowly, and

display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or injury.

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that

the vehicle is parked in a place with adequate ventilation. In a closed area

such as a garage, exhaust gases including harmful carbon monoxide (CO)

may collect and enter the vehicle. This may lead to death or a serious

health hazard.

107

2. Instrument cluster

Multi-information display (2-ring meter)

Display content

The multi-information display presents the driver with a variety of driv-

ing-related data, such as the current outside temperature. The multi-

information display can also be used to change the display settings

and other settings.

● Outside temperature (→P. 98)

● Shift position and gear position

indicator (if equipped)

(→P. 223)

2

● Pop-up display

In some situations a warning

message or the operation sta-

tus of a system will be tempo-

rarily displayed on the multi-

information display.

On some models: Some pop-up displays can be set on/off. (→P. 113)

● Trip information/Distance until next engine oil change (→P. 109)

Displays the following items:

• Odometer

• Trip meter

• Distance until next engine oil change (if equipped)

108

2. Instrument cluster

● Menu icons (→P. 110)

Select a menu icon to display its content.

To display the menu icons, press the

steering wheel.

or

switch on the

Drive information (→P. 111)

Select to display various drive data.

Navigation system-linked display (if equipped)

Select to display the following navigation system-linked information.

• Route guidance

• Compass display (north-up display/heading-up display)

Audio system-linked display (if equipped)

Select to enable selection of an audio source or track on the meter

using the meter control switches.

Driving assist system information (if equipped)

Select to display the operational status of the following systems:

• LDA (Lane Departure Alert) (→P. 268)

• RSA (Road Sign Assist) (→P. 277)

Warning message display (→P. 551)

Select to display warning messages and measures to be taken if a

malfunction is detected.

Settings display (→P. 113)

Select to change the meter display settings and other settings.

109

2. Instrument cluster

Trip information/Distance until next engine oil change

◆ Changing the display

To change the displayed item,

press the “TRIP” switch.

Each time the switch is pressed,

the displayed item will be

changed.

2

◆ Display items

■ Odometer

Displays the total distance the vehicle has been driven.

■ Trip meter A/trip meter B

Displays the distance the vehicle has been driven since the meter

was last reset. Trip meters A and B can be used to record and dis-

play different distances independently.

To reset, display the desired trip meter and press and hold the “TRIP”

switch.

■ Distance until next engine oil change (if equipped)

Displays the distance the vehicle can be driven until an oil change

is necessary.

The distance until the next engine oil change will also be displayed in

the following situations:

• When the engine switch is turned to the “ON” position (vehicles with-

out a smart entry & start system) or IGNITION ON mode (vehicles

with a smart entry & start system).

• When a warning message indicating that oil maintenance should be

performed soon or is required is displayed.

• Resetting: →P. 470

110

2. Instrument cluster

Menu icons

◆ Operating the meter control switches

The multi-information display is operated using the meter control

switches.

: Display the menu

1

icons/select menu

icons

: Change displayed

item, scroll up/down

the

screen

and

move the cursor up/

down

Press: Enter/Set

2

3

Press and hold: Reset

Return to the previous screen

111

2. Instrument cluster

◆ Drive information

■ Drive information 1/Drive information 2/Drive information 3

Displays drive information such as the following:

● Drive information 1

• Current fuel consumption (gauge display)

• Average fuel economy (after reset)

● Drive information 2

• Distance (driving range)

• Average vehicle speed (after reset)

● Drive information 3 (if equipped)

• Stop & Start system operation time (after start)

• Stop & Start system operation time (after reset)

2

Displayed items (listed below) can be changed on the settings dis-

play. (→P. 113)

Item

Content

Current fuel con-

sumption

(gauge display)

Displays the current rate of fuel consump-

tion on a gauge display

Current fuel con-

sumption

(numeric display)

Displays the current rate of fuel consump-

tion as a number

Average

economy

(after reset)

fuel

Displays average fuel consumption since

^{display reset}*^{2, 3}

Average

economy

(after start)

Displays average fuel consumption since

engine start*³

Average

economy

(after refuel)

Displays average fuel consumption since

^refuel*^{3, 4}

Displays the total amount of time the engine

has been stopped due to the operation of

the Stop & Start system since the system

^{was last reset}*²

Stop & Start sys-

tem operation time

^{(after reset)}*¹

Displays the amount of time the engine has

been stopped due to the operation of the

Stop & Start system since the engine was

started

Stop & Start sys-

tem operation time

^{(after start)}*¹

112

2. Instrument cluster

Item

Content

Average vehicle Displays average vehicle speed since dis-

speed (after reset) play reset*²

Average vehicle Displays average vehicle speed since

speed (after start) engine start

Elapsed

(after reset)

time

Displays elapsed time since display reset*²

Displays elapsed time since engine start

Elapsed

(after start)

time

Distance

(driving range)

Displays driving range with remaining

^fuel*^{4, 5}

Distance

(after start)

Displays drive distance since vehicle start

No item

Blank

*¹: If equipped

*²: Values that can be reset will be displayed with a circle ( ) in the upper

right corner.

To reset, display the desired item and press and hold

switch. If both

displayed items are resettable, a reset selection screen will appear.

*³: Use the displayed fuel consumption as a reference.

*⁴: When only a small amount of fuel is added to the tank, the display may not

be updated.

When refueling, turn the engine switch off. If the vehicle is refueled without

turning the engine switch off, the display may not be updated.

*⁵: This distance is computed based on your average fuel consumption. As a

result, the actual distance that can be driven may differ from that dis-

played.

■ Eco Driving Indicator (if equipped)

→P. 115

■ Digital speedometer

Displays vehicle speed as a number.

113

2. Instrument cluster

◆ Settings display

■

LDA (Lane Departure Alert) warning sensitivity (if

equipped)

LDA warning sensitivity can be set to 2 different levels.

■

Toyota parking assist-sensor (if equipped)

Select to activate/deactivate the Toyota parking assist-sensor sys-

tem.

■

RSA (Road Sign Assist) (if equipped)

Select to activate/deactivate the RSA system.

Meter light control

2

Select to adjust the brightness of the meters when in night mode*.

*: Night mode: →P. 116

■

Other settings

Select to change the following settings:

●

RSA (Road Sign Assist) setting (if equipped)

• Notification method (excess speed/other warnings)

Select to change the notification method of the following warn-

ings to no notification/display only/display and buzzer.

Excess speed warning:

Warns the driver if the vehicle exceeds the speed displayed on

the speed limit sign on the multi-information display.

Other warnings:

Warns the driver if the system determines that the vehicle is

overtaking when a no overtaking sign is displayed on the multi-

information display.

• Excess speed notification level

Select to set the speed threshold over which the excess speed

warning starts to operate when a speed limit sign is displayed

on the multi-information display.

●

Stop & Start system setting (if equipped)

The length of time the Stop & Start system will operate when the

“A/C” switch of the air conditioning system is on can be set to 2

different levels.

114

2. Instrument cluster

● Units

Select to change the units of measure displayed on the multi-

information display.

●

Eco Driving Indicator Light (if equipped)

Select to activate/deactivate the Eco Driving Indicator Light.

● Drive information 1/Drive information 2/Drive information 3

Select to select up to 2 items that will be displayed on the Drive

information 1 screen, Drive information 2 screen and Drive infor-

mation 3 screen (if equipped) respectively. (→P. 111)

● Pop-up display

Select to set the following pop-up displays on/off.

• Incoming call display of the hands-free phone system (if

equipped)

• Route guidance display of the navigation system-linked sys-

tem (if equipped)

• Stop & Start system (if equipped)

● Initialization

Select to reset the meter display settings. (→P. 629)

Language

■

Select to change the language on the display.

115

2. Instrument cluster

■Eco Driving Indicator (if equipped)

Eco Driving Indicator Light

1

During Eco-friendly acceleration (Eco

driving), the Eco Driving Indicator Light

will turn on. When the acceleration

exceeds the Zone of Eco driving, or

when the vehicle is stopped, the light

turns off.

Eco Driving Indicator Zone Display

Suggests the Zone of Eco driving with current Eco driving ratio based on

acceleration.

2

Eco driving ratio based on acceleration

3

The number of green segments displayed on the Eco Driving Indicator

Zone Display decreases/increases depending on the acceleration.

If the acceleration exceeds the Zone of Eco driving, all of the green seg-

ments will disappear and the Eco Driving Indicator light will turn off.

Zone of Eco driving

4

Eco Driving Indicator will not operate under the following conditions:

●The shift lever is in any position other than D.

●A paddle shift switch (if equipped) is operated.

●Sport mode is selected.

●The vehicle speed is approximately 130 km/h (80 mph) or higher.

■Stop & Start system information pop-up display (if equipped)

In some situations the following Stop & Start system information will be tem-

porarily displayed on the multi-information display:

●Current Stop & Start system operation time

●Stop & Start operational status messages (→P. 291)

116

2. Instrument cluster

■Brightness of the meters (day mode and night mode)

●The brightness of the meters is changed between day mode and night

mode.

X Vehicles without automatic light control system

• Day mode: When the tail lights are off

• Night mode: When the tail lights are on

X Vehicles with automatic light control system

• Day mode: When the tail lights are off or when the tail lights are on but

the surrounding area is bright

• Night mode: When the tail lights are on and the surrounding area is dark

●When in night mode, the brightness will be reduced slightly unless the

meters are set to the maximum brightness level.

■Suspension of the settings display

●While driving, the multi-information display cannot be changed to setting

mode. Before changing the settings, stop the vehicle in a safe place.

●In the following situations, operation of some of the settings display may be

temporarily suspended.

• When a warning message appears on the multi-information display

• When the vehicle begins to move

■When disconnecting and reconnecting battery terminals

^{The drive information data}* will be reset.

*: Except Stop & Start system operation time

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

■Ending display

When the engine switch is turned off, the following information about the cur-

rent trip will be temporarily displayed on the multi-information display.

●Elapsed time (after start)

●Distance (after start)

●Average fuel economy (after start)

117

2. Instrument cluster

WARNING

■Caution for use while driving

●When operating the multi-information display while driving, pay extra

attention to the safety of the area around the vehicle.

●Do not look continuously at the multi-information display while driving as

you may fail to see pedestrians, objects on the road, etc. ahead of the

vehicle.

■The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal

information display. At extremely low temperatures, the information display

monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or injury.

2

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that

the vehicle is parked in a place with adequate ventilation. In a closed area

such as a garage, exhaust gases including harmful carbon monoxide (CO)

may collect and enter the vehicle. This may lead to death or a serious

health hazard.

NOTICE

■While setting up the display

To prevent battery discharge, ensure that the engine is running while setting

up the display features.

118

2. Instrument cluster

∗

Fuel consumption information

Fuel consumption information can be displayed on the naviga-

tion/multimedia system.

Navigation/multimedia system

∗: If equipped

119

2. Instrument cluster

Trip information

Press the “CAR” button on the

1

navigation/multimedia system.

2

Select “Trip information”.

2

■ Trip information screen

Average vehicle speed since

1

the engine was started.

Cruising range (→P. 120)

2

Fuel consumption in the past

3

15 minutes

Elapsed time since the

4

engine was started.

Resetting the consumption

5

data

Vehicles without a smart entry & start system:

Average fuel consumption for the past 15 minutes is divided by

color into past averages and averages attained since the engine

switch was last turned to the “ON” position. Use the displayed aver-

age fuel consumption as a reference.

Vehicles with a smart entry & start system:

Average fuel consumption for the past 15 minutes is divided by

color into past averages and averages attained since the engine

switch was last turned to IGNITION ON mode. Use the displayed

average fuel consumption as a reference.

The image is an example only.

120

2. Instrument cluster

Past record

Press the “CAR” button on the

navigation/multimedia system.

1

Select “Past record”.

2

■ Past record screen

Best recorded fuel consump-

1

tion

Previous fuel consumption

2

record

Average fuel consumption

3

Updating the average fuel

4

consumption data

Resetting the past record

5

data

The average fuel consumption history is divided by color into past

averages and the average fuel consumption since the last updated.

Use the displayed average fuel consumption as a reference.

The image is an example only.

■Updating the past record data

Update the average fuel consumption by selecting “Update” to measure the

current fuel consumption again.

■Resetting the data

The fuel consumption data can be deleted by selecting “Clear”.

■Cruising range

Displays the estimated maximum distance that can be driven with the quan-

tity of fuel remaining.

This distance is computed based on your average fuel consumption.

As a result, the actual distance that can be driven may differ from that dis-

played.

Instrument cluster for Your Toyota Auris 4 Door Second Generation (2013-2018)

Related Topics

Popular Owner Manuals

Latest Owner Manuals