Get Instrument cluster -> Multi-information display (3-ring meter) Guide for Toyota Auris 4 Door Second Generation (2013-2018)

101

2. Instrument cluster

Multi-information display (3-ring meter)

Display content

The multi-information display presents the driver with a variety of driv-

ing-related data, such as the current outside temperature.

● Engine coolant temperature

gauge (→P. 98)

● Outside temperature (→P. 98)

● Shift position and gear position

indicator (if equipped)

(→P. 223)

2

● Trip information/Drive informa-

tion/Meter light control

(→P. 102)

Displays the following items:

• Odometer

• Trip meter

• Stop & Start system operation time (if equipped)

• Stop & Start system total operation time (if equipped)

• Average fuel consumption

• Driving range

• Meter light control

● Display customization (→P. 104)

• Eco Driving Indicator Light (if equipped)

• Stop & Start system operation time (if equipped)

102

2. Instrument cluster

Trip information/Drive information/Meter light control

◆ Changing the display

To change the displayed item,

press the display change switch

or the “DISP” switch.

Each time the switch is pressed,

the displayed item will be

changed.

◆ Display items

■ Odometer

“

” will be displayed.

Displays the total distance the vehicle has been driven.

■ Trip meter A/trip meter B

“

”/“

” will be displayed.

Displays the distance the vehicle has been driven since the meter

was last reset. Trip meters A and B can be used to record and dis-

play different distances independently.

To reset, display the desired trip meter and press and hold the display

change switch or the “DISP” switch.

■ Stop & Start system operation time (if equipped)

“

” will be displayed.

Displays the amount of time the engine was stopped due to the

operation of the Stop & Start system during the current trip (from

when the engine was started until it is turned off).

■ Stop & Start system total operation time (if equipped)

“

” will be displayed.

Displays the total amount of time that the engine has been stopped

due to the operation of the Stop & Start system since the meter was

last reset.

To reset, display the Stop & Start system total operation time and press

and hold the display change switch or the “DISP” switch.

103

2. Instrument cluster

■ Average fuel consumption

” will be displayed.

“

Displays the average fuel consumption since the function was

reset.

• To reset, display the average fuel consumption and press and hold the

display change switch or the “DISP” switch.

• Vehicles with a Multidrive: When the display is changed to the average

fuel economy display, the Eco Driving Indicator zone display (→P. 105)

will be displayed instead of the engine coolant temperature gauge.

• Use the displayed average fuel consumption as a reference.

2

■ Driving range

“

” will be displayed.

Displays the estimated maximum distance that can be driven with

the quantity of fuel remaining.

• This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

• When only a small amount of fuel is added to the tank, the display may

not be updated.

• When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

■ Meter light control display

Displays the meter light control display.

• The meter light control display can only be displayed when the tail lights

are on.

• The brightness of the meters can only be adjusted when the tail lights

are on.

• To adjust the brightness, display the meter light control display and

press and hold the display change switch or the “DISP” switch.

104

2. Instrument cluster

Display customization

The following display items can be customized:

◆ Customizable items

■ Eco Driving Indicator Light (if equipped)

Can be enabled or disabled

■ Stop & Start system operation time pop-up display (if

equipped)

Current Stop & Start system operation time can be enabled or dis-

abled.

◆ Customizing the display

To change to the customizing mode screen, display the odometer

1

and then press and hold the display change switch or the “DISP”

switch for 5 seconds or more.

To change the setting, press the display change switch or the

2

“DISP” switch.

Each time the switch is pressed, the setting will be changed.

After customization, press the display change switch or “DISP”

switch for 2 seconds or more to return to the odometer.

105

2. Instrument cluster

■Eco Driving Indicator (if equipped)

Eco Driving Indicator Light

1

During Eco-friendly acceleration (Eco

driving), the Eco Driving Indicator Light

will turn on. When the acceleration

exceeds the Zone of Eco driving, or

when the vehicle is stopped, the light

turns off.

Eco Driving Indicator Zone Display

2

Suggests the Zone of Eco driving with

current Eco driving ratio based on

acceleration.

2

Eco driving ratio based on acceleration

3

If the acceleration exceeds the Zone of Eco driving, the right side of the

Eco Driving Indicator Zone Display blinks and the Eco Driving Indicator

light will turn off.

Zone of Eco driving

4

Eco Driving Indicator will not operate under the following conditions:

●The shift lever is in any position other than D.

●A paddle shift switch (if equipped) is operated.

●Sport mode is selected.

●The vehicle speed is approximately 130 km/h (80 mph) or higher.

■Stop & Start system operation time pop-up display (if equipped)

When enabled (→P. 104), the current Stop & Start system operation time will

be displayed on the multi-information display.

106

2. Instrument cluster

■Brightness of the meters

When the tail lights are turned on, the brightness will be reduced slightly

unless the meters are set to the maximum brightness level.

■When disconnecting and reconnecting battery terminals

The following information data will be reset:

●Average fuel consumption

●Driving range

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

WARNING

■Caution for use while driving

●When operating the multi-information display while driving, pay extra

attention to the safety of the area around the vehicle.

●Do not look continuously at the multi-information display while driving as

you may fail to see pedestrians, objects on the road, etc. ahead of the

vehicle.

■The display at low temperatures

Allow the interior of the vehicle to warm up before using the display. At

extremely low temperatures, the display monitor may respond slowly, and

display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or injury.

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that

the vehicle is parked in a place with adequate ventilation. In a closed area

such as a garage, exhaust gases including harmful carbon monoxide (CO)

may collect and enter the vehicle. This may lead to death or a serious

health hazard.

Instrument cluster -> Multi-information display (3-ring meter) for Your Toyota Auris 4 Door Second Generation (2013-2018)

Related Topics

Instrument cluster

Popular Owner Manuals

Latest Owner Manuals