Get Operation of each component -> Opening and closing the windows Guide for Toyota Auris 4 Door Second Generation (2013-2018)

181

3-5. Opening and closing the windows

∗

Power windows

Opening and closing procedures

The power windows can be opened and closed using the switches.

Operating the switch moves the windows as follows:

X One-touch opening/closing on driver’s window only type

Closing

1

One-touch closing (driver’s win-

2

dow only)*

Opening

3

One-touch opening (driver’s

4

window only)*

*^{: To stop the window partway, oper-}

ate the switch in the opposite direc-

tion.

X One-touch opening/closing on all windows type

Closing

1

One-touch closing*

2

Opening

3

One-touch opening*

4

*^{: To stop the window partway, oper-}

ate the switch in the opposite direc-

tion.

Window lock switch

Press the switch to lock the pas-

senger window switches.

Use this switch to prevent children

from accidentally opening or clos-

ing a passenger window.

∗: If equipped

182

3-5. Opening and closing the windows

■The power windows can be operated when

Vehicles without a smart entry & start system:

The engine switch is in the “ON” position.

Vehicles with a smart entry & start system:

The engine switch is in IGNITION ON mode.

■Operating the power windows after turning the engine off

Vehicles without a smart entry & start system:

The power windows can be operated for approximately 45 seconds after the

engine switch is turned to the “ACC” or “LOCK” position. They cannot, how-

ever, be operated once either front door is opened.

Vehicles with a smart entry & start system:

The power windows can be operated for approximately 45 seconds after the

engine switch is turned to ACCESSORY mode or turned off. They cannot,

however, be operated once either front door is opened.

■Jam protection function (windows with one-touch closing function only)

If an object becomes caught between the window and the window frame, win-

dow travel is stopped and the window is opened slightly.

183

3-5. Opening and closing the windows

■When the power window does not close normally (windows with one-

touch closing function only)

If the jam protection function is operating abnormally and a window cannot be

closed, perform the following operations using the power window switch on

the relevant door.

●Vehicles without a smart entry & start system: After stopping the vehicle, the

window can be closed by holding the power window switch in the one-touch

closing position while the engine switch is turned to the “ON” position.

Vehicles with a smart entry & start system: After stopping the vehicle, the

window can be closed by holding the power window switch in the one-touch

closing position while the engine switch is turned to IGNITION ON mode.

●If the window still cannot be closed even by carrying out the operation as

explained above, initialize the function by performing the following proce-

dure.

3

Hold the power window switch in the one-touch closing position. Continue

1

holding the switch for a further 6 seconds after the window has closed.

Hold the power window switch in the one-touch opening position. Con-

2

tinue holding the switch for a further 2 seconds after the window has

opened completely.

Hold the power window switch in the one-touch closing position once

3

again. Continue holding the switch for a further 2 seconds after the win-

dow has closed.

If you release the switch while the window is moving, start again from the

beginning.

If the window continues to close but then re-open slightly even after perform-

ing the above procedure correctly, have the vehicle inspected by any autho-

rized Toyota dealer or repairer, or another duly qualified and equipped

professional.

184

3-5. Opening and closing the windows

WARNING

Observe the following precautions.

Failure to do so may result in death or serious injury.

■Closing the windows

●The driver is responsible for all the power window operations, including the

operation for the passengers. In order to prevent accidental operation,

especially by a child, do not let a child operate the power windows. It is

possible for children and other passengers to have body parts caught in

the power window. Also, when riding with a child, it is recommended to use

the window lock switch. (→P. 181)

●Check to make sure that all passengers do not have any part of their body

in a position where it could be caught when a window is being operated.

●When exiting the vehicle, turn the engine switch off, carry the key and exit

the vehicle along with the child. There may be accidental operation, due to

mischief, etc., that may possibly lead to an accident.

■Jam protection function (windows with one-touch closing function

only)

●Never use any part of your body to intentionally activate the jam protection

function.

●The jam protection function may not work if something gets caught just

before the window fully closes.

Operation of each component -> Opening and closing the windows for Your Toyota Auris 4 Door Second Generation (2013-2018)

Related Topics

Operation of each component

Popular Owner Manuals

Latest Owner Manuals