2013-2018 Toyota Avalon 4 Door When trouble arises -> If the electronic key does not operate User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

When trouble arises -> If the electronic key does not operate for Your Toyota Avalon 4 Door Fourth Generation (2013-2018)

411  
7-2. Steps to take in an emergency  
If the electronic key does not operate  
properly  
If communication between the electronic key and vehicle is  
interrupted (P. 114) or the electronic key cannot be used  
because the battery is depleted, the smart key system and wire-  
less remote control cannot be used. In such cases, the doors  
and trunk can be opened and the engine can be started by fol-  
lowing the procedure below.  
Locking and unlocking the doors and unlocking the trunk  
Doors  
Use the mechanical key (P.  
93) in order to perform the fol-  
lowing operations:  
Locks all the doors  
1
Unlocks the door  
2
Turning the key rearward  
unlocks the driver’s door. Turn-  
ing the key once again within 5  
seconds unlocks the other  
doors.  
7
Trunk  
P. 106  
412  
7-2. Steps to take in an emergency  
Starting the engine  
1
Ensure that the shift lever is in P and depress the brake pedal.  
2
Touch the Toyota emblem side  
of the electronic key to the  
engine switch.  
The engine switch will turn to IGNI-  
TION ON mode.  
When the smart key system is  
deactivated in customization set-  
ting, the engine switch will turn to  
ACCESSORY mode.  
3
4
Firmly depress the brake pedal.  
A message indicating how to start the engine will be displayed on the  
multi-information display.  
Press the engine switch.  
In the event that the engine still cannot be started, contact your Toyota  
dealer.  
413  
7-2. Steps to take in an emergency  
Stopping the engine  
Shift the shift lever to P and press the engine switch as you normally do when  
stopping the engine.  
Replacing the key battery  
As the above procedure is a temporary measure, it is recommended that the  
electronic key battery be replaced immediately when the battery is depleted.  
(P. 360)  
Changing engine switch modes  
3
Release the brake pedal and press the engine switch in step  
above.  
The engine does not start and modes will be changed each time the switch is  
pressed.(P. 161)  
When the electronic key does not work properly  
Make sure that the smart key system has not been deactivated in the cus-  
tomization setting. If it is off, turn the function on.  
(Customizable features P. 449)  
Check if battery-saving mode is set. If it is set, cancel the function.  
(P. 113)  
7

Related Topics

Popular Owner Manuals