Get Instrument cluster Guide for Toyota Avalon 4 Door Fifth Generation (2019-2022)

83

Instrument cluster

2

2.

Instrument cluster

Warning lights and

indicators .......................... 84

Gauges and meters ............ 90

Multi-information display ..... 93

Head-up display................ 109

Fuel consumption

information...................... 116

84

2. Instrument cluster

Warning lights and indic ators

The warning lights and indicators on the instrument cluster, cen-

ter panel and outside rear view mirrors inform the driver of the

status of the vehicle’s various systems.

For the purpose of explanation, the following illustrations dis-

play all warning lights and indicators illuminated.

The units used on the meters and some indicators may differ depending on

the target region.

85

2. Instrument cluster

Warning lights

Warning lights inform the driver of malfunctions in the indicated vehi-

cle’s systems.

1

*

1

*

Brake system warning

ABS warning light

light (P. 434)

(P. 435)

(U.S.A.)

1

*

1

*

2

Brake system warning

ABS warning light

light (P. 434)

(P. 435)

(Canada)

(Red)

(Canada)

Brake Override System/

Drive-Start Control/Intel-

ligent Clearance Sonar

(if equipped) warning

light (P. 435)

1

2

*

Brake system warning

light (P. 434)

(Yellow)

High coolant tempera-

ture warning light

(P. 434)

2

*

Parking brake indicator

(P. 436)

(U.S.A.)

2

*

Charging system

Parking brake indicator

warning light (P. 434)

(P. 436)

(Canada)

2

*

1, 3

*

Low engine oil pressure

Brake hold operated

warning light (P. 434)

indicator (P. 436)

1

*

1

*

Electric power steering

system warning light

(P. 436)

Malfunction indicator

lamp (P. 435)

(U.S.A.)

(Red/yellow)

1

*

1, 4

*

Malfunction indicator

PCS warning light

lamp (P. 435)

(P. 437)

(Canada)

1

*

1, 3

*

SRS warning light

ICS OFF indicator

(P. 435)

(P. 437)

(if equipped)

86

2. Instrument cluster

2

*

5

*

Rear passengers’ seat

belt reminder lights

(P. 438)

LDA indicator (P. 436)

(Amber)

1

*

1

*

Master warning light

(P. 438)

Slip indicator (P. 437)

1

Low fuel level warning

Tire pressure warning

light (P. 437)

light (P. 438)

Driver’s and front

passenger’s seat belt

reminder light (P. 438)

*¹: These lights turn on when the engine switch is turned to IGNITION ON

mode to indicate that a system check is being performed. They will turn off

after the engine is started, or after a few seconds. There may be a mal-

function in a system if a light does not come on, or turn off. Have the vehi-

cle inspected by your Toyota dealer.

*²: This light illuminates on the multi-information display.

*³: This light flashes to indicate a malfunction.

*⁴: This light flashes or illuminates to indicate a malfunction.

*⁵: This light illuminates on the center panel.

87

2. Instrument cluster

Indicators

The indicators inform the driver of the operating state of the vehicle’s

various systems.

1

*

Turn signal indicator

Brake hold standby

(P. 195)

indicator (P. 200)

2

*

2

*

2

*

Headlight indicator

(P. 202)

Cruise control indicator

(P. 247)

2

(U.S.A.)

Dynamic radar cruise

control indicator

(P. 247)

Tail light indicator

(P. 202)

(Canada)

Headlight high beam

Cruise control “SET”

indicator (P. 203)

indicator (P. 247)

2

1, 4

*

Automatic High Beam

indicator (P. 206)

PCS warning light

(P. 230)

1, 2, 3

*

Eco driving indicator

ICS OFF indicator

(P. 107)

(P. 287)

(if equipped)

2

*

Parking brake indicator

(P. 196)

LDA indicator (P. 237)

(U.S.A.)

(White)

2

*

Parking brake indicator

(P. 196)

(Canada)

(Green)

1

*

2, 5

*

Brake hold operated

indicator (P. 200)

(Amber)

88

2. Instrument cluster

2

*

1, 5

*

Smart key system indi-

cator (P. 184)

Slip indicator (P. 310)

2

1, 4

*

VSC OFF indicator

(P. 312)

“SPORT” indicator

(P. 305)

2

*

2

“BSM” indicator

“SPORT S” indicator

(P. 260)

(P. 305)

(if equipped)

2

*

2

*

“RCTA” indicator

“SPORT S+” indicator

(P. 260)

(P. 305)

(if equipped)

6, 7

2

*

BSM (Blind Spot Moni-

tor) outside rear view

mirror indicators

“CUSTOM” indicator

(P. 305)

(P. 260)

(if equipped)

1, 8

2

*

“AIR BAG

ON/OFF”

indicator

(P. 50)

“ECO MODE” indicator

(P. 305)

8

*

2, 9

*

Security indicator

Low outside tempera-

(P. 77, 80)

ture indicator (P. 90)

2

*

Intuitive parking assist

indicator (P. 276)

(if equipped)

89

2. Instrument cluster

*¹: These lights turn on when the engine switch is turned to IGNITION ON

mode to indicate that a system check is being performed. They will turn off

after the engine is started, or after a few seconds. There may be a mal-

function in a system if a light does not come on, or turn off. Have the vehi-

cle inspected by your Toyota dealer.

*²: This light illuminates on the multi-information display.

*³: This light does not turn on when the system is disabled.

*⁴: This light turns on when the system is off.

*⁵: This light flashes to indicate that the system is operating.

*⁶: These indicators will illuminate in the following situations to indicate that

the system initial check is being performed:

2

• When the BSM function or RCTA function is enabled and the engine

switch is turned to IGNITION ON mode.

• When the engine switch is in IGNITION ON mode and the BSM function

is enabled.

• When the engine switch is in IGNITION ON mode and the RCTA func-

tion is enabled. (At this time, a buzzer will also sound.)

The indicators will turn off after a few seconds. If the indicators do not

illuminate or turn off, or if a buzzer does not sound when the RCTA func-

tion is enabled, the system may be malfunctioning. Have the vehicle

inspected by your Toyota dealer.

*⁷: This light illuminates on the outside rear view mirrors.

*⁸: This light illuminates on the center panel.

*⁹: When the outside temperature is approximately 37°F (3°C) or lower, this

indicator will flash for approximately 10 seconds, then stay on.

WARNING

■If a safety system warning light does not come on

Should a safety system light such as the ABS and SRS warning lights not

come on when you start the engine, this could mean that these systems are

not available to help protect you in an accident, which could result in death

or serious injury. Have the vehicle inspected by your Toyota dealer immedi-

ately if this occurs.

90

2. Instrument cluster

Gauges and m et ers

The units used on the meters may differ depending on the target region.

Tachometer

1

Displays the engine speed in revolutions per minute

Shift position (P. 189)

2

Outside temperature

3

Displays the outside temperature within the range of -40°F (-40°C) to

122°F (50°C). Low outside temperature indicator comes on when the

ambient temperature is 37°F (3°C) or lower.

Multi-information display

4

Presents the driver with a variety of vehicle data (P. 93)

Displays warning messages in case of a malfunction (P. 444)

Speedometer

5

Fuel gauge

6

Odometer and trip meter P. 106)

7

Engine coolant temperature gauge

8

Displays the engine coolant temperature

91

2. Instrument cluster

Instrument panel light control

The brightness of the instrument panel lights can be adjusted.

The brightness of some of the interior lights will be changed when the

brightness of the instrument panel lights is adjusted. (P. 332)

Darker

1

2

Brighter

• The brightness of the instrument

panel lights can be adjusted

individually for day mode and

2

night mode*.

• If the brightness is adjusted

when the surroundings are

bright and the tail lights are on

(day mode brightness adjust-

ment), the brightness level of

night mode will be adjusted at

the same time.

*: Day mode and night mode: P. 92

92

2. Instrument cluster

■The meters and display illuminate when

The engine switch is in IGNITION ON mode.

■Brightness of the meters (day mode and night mode)

●The brightness of the meters is changed between day mode and night

mode.

• Day mode: When the tail lights are off or when the tail lights are on but

the surrounding area is bright

• Night mode: When the tail lights are on and the surrounding area is dark

●When in night mode, the brightness will be reduced slightly unless the

meters are set to the maximum brightness level.

■Outside temperature display

In the following situations, the correct outside temperature may not be dis-

played, or the display may take longer than normal to change:

●When stopped, or driving at low speeds (less than 16 mph [25 km/h])

●When the outside temperature has changed suddenly (at the entrance/exit

of a garage, tunnel, etc.)

●When “” or “E” is displayed, the system may be malfunctioning.

Take your vehicle to your Toyota dealer.

NOTICE

■To prevent damage to the engine and its components

●Do not let the indicator needle of the tachometer enter the red zone, which

indicates the maximum engine speed.

●The engine may be overheating if the engine coolant temperature gauge is

in the red zone (H). In this case, immediately stop the vehicle in a safe

place, and check the engine after it has cooled completely. (P. 471)

93

2. Instrument cluster

Multi-informat ion display

Summary of functions

The multi-information display presents the driver with a variety of driv-

ing-related data, such as the current outside temperature. The multi-

information display can also be used to change the display settings

and other settings.

2

Indicators (P. 84)

1

Driving assist system status display area

2

Displays the operational status of the following systems:

• Dynamic radar cruise control with full-speed range (P. 247)

• LDA (Lane Departure Alert with steering control) (P. 237)

Speed limit display (vehicles with a navigation system) (U.S.A.

3

only)

Clock

4

For clock settings, refer to “NAVIGATION AND MULTIMEDIA SYSTEM

OWNER’S MANUAL”.

Speedometer

5

The speedometer display can be enabled/disabled in

on the multi-

information display. (P. 100)

When

is selected, the speedometer may be displayed in the content

display area.

94

2. Instrument cluster

Content display area

6

A variety of information can be displayed by selecting a menu icon. Addi-

tionally, warning or suggestion/advice pop-up displays will be displayed in

some situations.

• Menu icon content (P. 96)

• Suggestion function (P. 106)

• Warning message (P. 444)

Odometer/trip meter (P. 106)

Shift position (P. 189)

7

8

9

Outside temperature (P. 90)

Menu icons (P. 96)

10

11

12

“ODO/TRIP” switch (P. 95)

Meter control switches (P. 94)

Using the multi-information display

◆ Using the content display area

The content display area is operated using the meter control

switches.

Scroll screens*, change the

1

displayed content* and move

the cursor

Press: Enter/Set

2

Press and hold: Reset/Dis-

play the next screen

Return to the previous

3

screen

Pressing and holding the switch will display the first screen of the

selected menu icon.

Call sending/receiving display

4

Linked with the hands-free system, sending or receiving call is dis-

played. For details regarding the hands-free system, refer to the “NAVI-

GATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.

*: When the screen can be scrolled or different content can be displayed,

a mark, such as an arrow, will be displayed to suggest which switch to

operate.

95

2. Instrument cluster

◆ Using the odometer/trip meter

Items in this area are operated using the “ODO/TRIP” switch.

Press: Change displayed item

Each time the switch is pressed,

the displayed item will be

changed.

Press and hold: Reset

Display the desired trip meter

and press and hold the switch to

reset the trip meter.

2

96

2. Instrument cluster

Menu icons

Select a menu icon to display its content.

Driving information (P. 97)

Select to display the following:

• Speedometer/driving range

• Fuel consumption

• Eco Driving Indicator/driving range

Driving assist system information

Select to perform the following:

Display the operational status of the following systems:

• Dynamic radar cruise control with full-speed range (P. 247)

• LDA (Lane Departure Alert with steering control) (P. 237)

Display the following navigation system-linked information (if equipped):

• Route guidance

• Compass display (heading-up display)

Audio system-linked display

Select to enable selection of an audio source or track on the multi-infor-

mation display using the meter control switches.

Vehicle information

Select to perform the following:

Display the following information:

• Tire inflation pressure (P. 395)

Enable/Disable the following systems:

• Parking assist (Intuitive parking assist) (if equipped) (P. 276)

• BSM (Blind Spot Monitor) function (P. 260)

• RCTA (Rear Cross Traffic Alert) function (P. 260)

These functions can also be enabled/disabled on

.

Settings display (P. 100)

Select to change the meter display settings and other settings.

Warning message display (P. 444)

Select to display warning messages and measures to be taken if a mal-

function is detected.

97

2. Instrument cluster

Driving information (

)

■ Speedometer/driving range

• Speedometer

• Driving range

Displays the driving range with remaining fuel.

When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

2

This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

■ Fuel consumption

Current fuel consumption

1

Displays the instantaneous cur-

rent fuel consumption.

Average fuel economy (after

2

start)

Displays the average fuel con-

sumption since engine start.*¹

Driving range

3

Displays the driving range with remaining fuel.*^{2, 3}

98

2. Instrument cluster

Gadget*⁴

4

The following items can be displayed by changing the settings for gad-

get content and fuel economy type on

. (P. 100)

Displayable item

Content

Gadget

content

Fuel economy

type

Trip

(after start)

Displays the average vehicle speed since

engine start.

Average

vehicle

speed

Displays the average vehicle speed since the

display was reset.*⁵

Total

(after reset)

Trip

(after start)

Displays the distance driven since vehicle

start.

Distance

Displays the distance driven since the display

was reset.*⁵

Total

(after reset)

Trip

(after start)

Displays the elapsed time since engine start.

Elapsed

time

Displays the elapsed time since the display

was reset.*⁵

Total

(after reset)

Average fuel economy

5

Displayed item (listed below) can be changed on the fuel economy type

screen of . (P. 100)

● Total (after reset)

Displays the average fuel consumption since the display was reset.*^{1, 5}

● Tank (after refuel)

Displays the average fuel consumption since the vehicle was refu-

eled.*^{1, 2}

99

2. Instrument cluster

*¹: Use the displayed fuel consumption as a reference only.

*²: When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

*³: This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

*⁴: The default setting is no display.

*⁵: This display can be reset by pressing and holding

played.

2

while it is dis-

■ Eco Driving Indicator/driving range

• Eco Driving Indicator

P. 107

• Driving range

Displays the driving range with remaining fuel.

When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

100

2. Instrument cluster

Settings display (

)

◆ Changing settings

Use the meter control switches on the steering wheel to change

settings.

1

Press

or

Operate the switches to select a desired item.

Press or press and hold

to select

.

2

3

.

The available settings will differ depending on if

is pressed or

pressed and held. Follow the instructions on the display.

◆ Setting items

■

LDA (Lane Departure Alert with steering control) (P. 237)

Press and hold to change the settings of the following items:

Item

Settings

Details

On

Off

Select to enable/disable steering

wheel assistance.

Steering assist

Alert sensitivity

Sway warning

(High)

Select to set the warning sensi-

tivity.

(Normal)

On

Off

Select to enable/disable the vehi-

cle sway warning.

(High)

Select to set the vehicle sway

warning sensitivity.

Sway sensitivity

(Normal)

(Low)

101

2. Instrument cluster

■

PCS (Pre-Collision System) (P. 226)

Press to enable/disable the pre-collision system.

Item

Settings

Details

On

Off

Select to enable/disable the pre-

collision system.

PCS

Press and hold

Item

to change the settings of the following item:

2

Settings

(Far)

Details

Warning sensitivity

(Warning timing)

Select to change the warning

timing.

(Middle)

(Near)

■

BSM (Blind Spot Monitor) (P. 260)

Press to enable/disable the Blind Spot Monitor function.

Item

Settings

Details

On

Off

Select to enable/disable the

Blind Spot Monitor function.

BSM

Press and hold

Item

to change the settings of the following item:

Settings

(Bright)

Details

Outside rear view

Select to change the brightness

of the outside rear view mirror

indicators.

mirror

indicator

(Dim)

brightness

(Early)

(Interme-

diate)

(Late)

Select to change the alert sensi-

tivity for an approaching vehicle.

Sensitivity

(Only

when

vehicle

detected

in blind

spot)

102

2. Instrument cluster

■

RCTA (Rear Cross Traffic Alert) (P. 260)

Press

to enable/disable the Rear Cross Traffic Alert function.

Item

Settings

Details

On

Off

Select to enable/disable the Rear

Cross Traffic Alert function.

RCTA

Press and hold

Item

to change the settings of the following item:

Settings

(Low)

Details

RCTA buzzer vol-

ume

Select to change the volume of

the RCTA buzzer.

(Medium)

(Loud)

■

ICS (Intelligent Clearance Sonar) (if equipped) (P. 284)

Press to enable/disable the Intelligent Clearance Sonar.

Item

Settings

Details

On

Off

Select to enable/disable the

Intelligent Clearance Sonar sys-

tem.

ICS

■

Parking assist (Intuitive parking assist) (if equipped)

(P. 276)

Press

to enable/disable the Intuitive parking assist.

Item

parking

Settings

Details

On

Off

Intuitive

assist

Select to enable/disable the intui-

tive parking assist.

Press and hold

Item

to change the settings of the following item:

Settings

(Low)

Details

Select to change the volume of

the intuitive parking assist

buzzer.

Volume

(Medium)

(Loud)

103

2. Instrument cluster

■

HUD (Head-up display) (if equipped) (P. 109)

Press

to enable/disable the head-up display.

Item

Settings

Details

On

Off

Select to enable/disable the

head-up display.

HUD

Press and hold

Item

to change the settings of the following items:

Settings

Details

2

Select to adjust the brightness/

position of the head-up display.

• Press the

adjust the display brightness.

• Press the switch to

/

switch to

HUD Brightness/Position

/

adjust the display position.

Select to change the display

between the following:

• Eco Driving Indicator

• Tachometer

Tachometer

settings

• No content

HUD Driving

support

Navigation

system

Select to enable/disable head-up

display content.

Driving Assist

Compass

Select to adjust the angle of the

head-up display.

Rotation

Press the

/

switch to

adjust the display angle.

104

2. Instrument cluster

■

Vehicle settings

Press and hold

to change the settings of the following items:

Item

Settings

Details

TPWS (Tire pressure warning system) (P. 395)

Select to initialize the tire pres-

sure warning system. To per-

form initialization, press and hold

Set pressure (tire pressure warning sys-

tem initialization)

the

switch.

Before performing initialization,

make sure to adjust the inflation

pressure of each tire to the spec-

ified level. (P. 396)

Select to register the ID codes of

the tire pressure sensors to the

tire pressure warning system. To

register the ID codes, press and

Change wheel (register tire pressure

warning system sensor ID codes)

hold the

switch.

(P. 397)

Scheduled maintenance display

Maintenance data reset

Select to reset the message indi-

cating maintenance is required,

after the required maintenance is

performed. (P. 373)

105

2. Instrument cluster

■

Meter settings

Press and hold

to change the settings of the following items:

Item

Language

Units

Settings

Details

Select to change the language

displayed.

Select to change the units of

measure displayed.

On

Off

On

Off

2

Select to enable/disable the Eco

Driving Indicator Light. (P. 107)

(Eco Driving

Indicator Light)

Select to enable/disable the

speedometer display.

Speedometer

No display

Average vehicle

speed

Gadget content

Select to turn the display of a

gadget.

Distance

Elapsed time

Trip (after start)*¹

Total (after reset)

Select to change the average

fuel consumption display and an

item to be displayed as gadget.

Fuel economy type

Tank

(after refuel)*²

Select to turn the multi-informa-

tion display off.

To turn the multi-information dis-

play on again, press any direc-

Multi-information display off

tion switch (

/

).

Intersection guid-

ance (if equipped)

Select to enable/disable the pop-

up display.

Pop-up display

Default setting

Incoming calls

Brightness adjust-

ment

Select to reset the meter display

settings to the default setting.

*¹: Selecting this item will only change the gadget.

*²: Selecting this item will turn the display of the gadget off.

106

2. Instrument cluster

Odometer/trip meter

■ Odometer

Displays the total distance the vehicle has been driven.

■ Trip meter A/trip meter B

Displays the distance the vehicle has been driven since the meter

was last reset. Trip meters A and B can be used to record and dis-

play different distances independently.

To reset, display the desired trip meter and press and hold the “ODO/

TRIP” switch.

Suggestion function

Displays suggestions to the driver in the following situations. To select

a response to a displayed suggestion, use the meter control switches.

The suggestion function can be turned on/off.

(Customizable features:P. 505)

■ Suggestion to turn off the headlights

If the headlights are left on for a certain amount of time after the

engine switch has been turned off, if the headlight switch is in the

“AUTO” position, a suggestion message will be displayed asking if

you wish to turn the headlights off. To turn the headlights off, select

“Yes”.

If a front door is opened after the engine switch is turned off, this sug-

gestion message will not be displayed.

107

2. Instrument cluster

■Eco Driving Indicator

Eco Driving Indicator Light

1

During Eco-friendly acceleration (Eco

driving), the Eco Driving Indicator Light

will turn on. When the acceleration

exceeds the Zone of Eco driving, or

when the vehicle is stopped, the light

turns off.

Eco Driving Indicator Zone Display

2

Suggests the Zone of Eco driving with

current Eco driving ratio based on

acceleration.

2

Eco driving ratio based on acceleration

3

If the acceleration exceeds the Zone of

Eco driving, the right side of the Eco

Driving Indicator Zone Display will illu-

minate.

Zone of Eco driving

4

Eco Driving Indicator will not operate under the following conditions:

●The shift lever is in any position other than D.

●A paddle shift switch (if equipped) is operated.

●Neither normal mode nor Eco drive mode is selected. (P. 305)

●The vehicle speed is approximately 80 mph (130 km/h) or higher.

■Suspension of the settings display

●Some settings cannot be changed while driving. When changing settings,

park the vehicle in a safe place.

●If a warning message is displayed, operation of the settings display will be

suspended.

■Tire pressure

●It may take a few minutes to display the tire inflation pressure after the

engine switch is turned to IGNITION ON mode. It may also take a few min-

utes to display the tire inflation pressure after inflation pressure has been

adjusted.

●“---” may be displayed if the tire position information cannot be determined

due to unfavorable radio wave conditions.

●Tire inflation pressure changes with temperature. The displayed values may

also be different from the values measured using a tire pressure gauge.

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

■Customization

Some functions can be customized. (P. 100, 505)

108

2. Instrument cluster

WARNING

■Caution for use while driving

●When operating the multi-information display while driving, pay extra

attention to the safety of the area around the vehicle.

●Do not look continuously at the multi-information display while driving as

you may fail to see pedestrians, objects on the road, etc. ahead of the

vehicle.

■The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal

information display. At extremely low temperatures, the information display

monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or injury.

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that

the vehicle is parked in a place with adequate ventilation. In a closed area

such as a garage, exhaust gases including harmful carbon monoxide (CO)

may collect and enter the vehicle. This may lead to death or a serious

health hazard.

NOTICE

■While setting up the display

To prevent battery discharge, ensure that the engine is running while setting

up the display features.

109

2. Instrument cluster

Head-up display^

Summary of functions

The head-up display is linked to the meters and navigation system

and projects a variety of information in front of the driver, such as the

current vehicle speed.

2

Driving assist system status/navigation system-linked display area

1

(P. 111)

The following pop-up displays will be displayed in certain situations:

• Pre-collision warning (pre-collision system)

• Alert from the Intelligent Clearance Sonar system (if equipped)

Shift position/speed limit display area

2

• Shift position (P. 189)

• Speed limit (vehicles with a navigation system) (U.S.A. only)

Vehicle speed display

3

Eco Driving Indicator/Tachometer (P. 112)

4

Information display area (P. 113)

5

The following pop-up displays will be displayed in certain situations:

• Warning/message

• Hands-free system status

• Audio system operation status

: If equipped

110

Using the head-up display

2. Instrument cluster

Select

on the multi-information display (P. 100) and then

.

◆ Enabling/disabling the head-up display

Press

to enable/disable the head-up display.

◆ Changing the head-up display settings

Press and hold

to change the following settings:

■ Display brightness/position

Select to adjust the brightness and position of the head-up display.

■ Display content

Select to enable/disable the following items:

• Route guidance to destination

• Driving assist system status

• Compass

Select to change the display between the following:

• Eco Driving Indicator

• Tachometer

• No content

■ Display angle

Select to adjust the angle of the head-up display.

111

2. Instrument cluster

Driving assist system status/navigation system-linked display

area

◆ Driving assist system status display

Displays the operational status of the following systems:

• Dynamic radar cruise control with full-speed range (P. 247)

• LDA (Lane Departure Alert with steering control) (P. 237)

• Intuitive parking assist (if equipped) (P. 276)

◆ Navigation system-linked display area

2

Displays the following items, which are linked to the navigation sys-

tem:

■ Street name

When the navigation system is performing route guidance, the

name of the next street will be displayed on the top of the display

area.

■ Route guidance to destination

Displayed when the navigation system is performing route guid-

ance. When approaching an intersection, an arrow will be displayed

to indicate the suggested direction of travel.

■ Compass

Displays the direction of travel.

112

2. Instrument cluster

Eco Driving Indicator/Tachometer

■ Eco Driving Indicator

Eco Driving Indicator Zone

1

Display

Eco driving ratio based on

2

acceleration

Zone of Eco driving

3

Displayed content is the same

as that displayed on the multi-

information display (Eco Driving

Indicator). For details, refer to P.

107.

■ Tachometer

Displays the engine speed in revolutions per minute.

113

2. Instrument cluster

Information display area

Displays the following items in the appropriate situation:

■ Warning/Message

● Alert from the LDA (Lane Departure Alert with steering control)

● Dynamic radar cruise control with full-speed range

●

message

Displayed when a suggestion/advice pop-up display is displayed on the

multi-information display. (P. 106)

2

message

Displayed when a warning message is displayed on the multi-informa-

tion display. (P. 444)

● Outside temperature

Displayed in the following situations:

• When the engine switch is turned to IGNITION ON mode

• When the low outside temperature indicator is flashing

Displayed content is the same as that displayed on the multi-information

display. For details, refer to the explanation of the outside temperature

display on the multi-information display. (P. 90)

■ Hands-free system status

Displayed when the hands-free system is operated.

■ Audio system operation status

Displayed when the audio system is operated.

114

2. Instrument cluster

■Head-up display

The head-up display may seem dark or hard to see when viewed through

sunglasses, especially polarized sunglasses.

Adjust the brightness of the head-up display or remove your sunglasses.

■Display brightness

The brightness of the head-up display can be adjusted on

of the multi-

information display. Also, it is automatically adjusted according to the ambient

brightness.

■Enabling/disabling of the head-up display

If the head-up display is disabled, it will remain disabled when the engine

switch is turned off then back to IGNITION ON mode.

■Street name display

Only street names which are included in the map data will be displayed.

WARNING

■Before using the head-up display

●Check that the position and brightness of the head-up display image does

not interfere with safe driving. Incorrect adjustment of the image’s position

or brightness may obstruct the driver’s view and lead to an accident,

resulting in death or serious injury.

●Do not continuously look at the head-up display while driving as you may

fail to see pedestrians, objects on the road, etc. ahead of the vehicle.

■Caution for changing settings of the head-up display

As the engine needs to be running while changing the settings of the head-

up display, ensure that the vehicle is parked in a place with adequate venti-

lation. In a closed area such as a garage, exhaust gases including harmful

carbon monoxide (CO) may collect and enter the vehicle. This may lead to

death or a serious health hazard.

115

2. Instrument cluster

NOTICE

■To prevent damage to components

●Do not place any drinks near the head-

up display projector. If the projector gets

wet, electrical malfunctions may result.

●Do not place anything on or put stickers

onto the head-up display projector.

Doing so could interrupt head-up dis-

play indications.

2

●Do not touch the inside of the head-up

display projector or thrust sharp edges

or the like into the projector.

Doing so could cause mechanical mal-

functions.

■When changing the settings of the head-up display

To prevent battery discharge, ensure that the engine is running while the

changing the settings of the head-up display.

116

2. Instrument cluster

Fuel consum ption inform ation

Fuel consumption information can be displayed on the audio

system screen.

Trip information

 Audio Plus (vehicles without Data Communication Module)

1

Press the “MENU” button.

2

Select “Info” on the “Menu”

screen.

If the “History” screen is displayed,

select “Trip Information”.

117

2. Instrument cluster

 Audio Plus (vehicles with Data Communication Module) or Pre-

mium Audio

1

Press the “MENU” button.

2

Select “Info” on the “Menu”

screen.

3

Select “ECO” on the “Informa-

tion” screen.

If the “History” screen is displayed,

select “Trip Information”.

2

Resetting the consumption data

1

Average vehicle speed since

2

the engine was started

Elapsed time since the engine

3

was started

Fuel consumption in the past 15

4

minutes

Cruising range (P. 119)

5

Current fuel consumption

6

Average fuel consumption for the past 15 minutes is divided by color

into past averages and averages attained since the engine switch was

last turned to IGNITION ON mode. Use the displayed average fuel

consumption as a reference.

This image is an example only.

118

History

2. Instrument cluster

 Audio Plus (vehicles without Data Communication Module)

1

Press the “MENU” button.

2

Select “Info” on the “Menu” screen.

If the “Trip Information” screen is displayed, select “History”.

 Audio Plus (vehicles with Data Communication Module) or Pre-

mium Audio

1

Press the “MENU” button.

2

Select “Info” on the “Menu” screen.

3

Select “ECO” on the “Information” screen.

If the “Trip Information” screen is displayed, select “History”.

Resetting the past record data

1

Best recorded fuel consumption

2

Current fuel economy

3

Previous fuel consumption

4

record

 Audio Plus

Displays the daily average fuel consumption. (Instead of the date,

“Trip 1” through “Trip 5” will be displayed.)

 Premium Audio

Displays the daily average fuel consumption.

Updating the average fuel consumption data

5

The average fuel consumption history is divided by color into past

averages and the average fuel consumption since the last updated.

Use the displayed average fuel consumption as a reference.

This image is an example only.

119

2. Instrument cluster

■Updating the past record data

Update the average fuel consumption by selecting “Update” to measure the

current fuel consumption again.

■Resetting the data

The fuel consumption data can be deleted by selecting “Clear”.

■Cruising range

Displays the estimated maximum distance that can be driven with the quan-

tity of fuel remaining.

This distance is computed based on your average fuel consumption.

As a result, the actual distance that can be driven may differ from that dis-

played.

2

120

2. Instrument cluster

Instrument cluster for Your Toyota Avalon 4 Door Fifth Generation (2019-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals