2019-2022 Toyota Avalon 4 Door Instrument cluster -> Head-up display User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instrument cluster -> Head-up display for Your Toyota Avalon 4 Door Fifth Generation (2019-2022)

109  
2. Instrument cluster  
Head-up display  
Summary of functions  
The head-up display is linked to the meters and navigation system  
and projects a variety of information in front of the driver, such as the  
current vehicle speed.  
2
Driving assist system status/navigation system-linked display area  
1
(P. 111)  
The following pop-up displays will be displayed in certain situations:  
• Pre-collision warning (pre-collision system)  
• Alert from the Intelligent Clearance Sonar system (if equipped)  
Shift position/speed limit display area  
2
• Shift position (P. 189)  
• Speed limit (vehicles with a navigation system) (U.S.A. only)  
Vehicle speed display  
3
Eco Driving Indicator/Tachometer (P. 112)  
4
Information display area (P. 113)  
5
The following pop-up displays will be displayed in certain situations:  
• Warning/message  
• Hands-free system status  
• Audio system operation status  
: If equipped  
110  
Using the head-up display  
2. Instrument cluster  
Select  
on the multi-information display (P. 100) and then  
.
Enabling/disabling the head-up display  
Press  
to enable/disable the head-up display.  
Changing the head-up display settings  
Press and hold  
to change the following settings:  
Display brightness/position  
Select to adjust the brightness and position of the head-up display.  
Display content  
Select to enable/disable the following items:  
• Route guidance to destination  
• Driving assist system status  
• Compass  
Select to change the display between the following:  
• Eco Driving Indicator  
Tachometer  
• No content  
Display angle  
Select to adjust the angle of the head-up display.  
111  
2. Instrument cluster  
Driving assist system status/navigation system-linked display  
area  
Driving assist system status display  
Displays the operational status of the following systems:  
• Dynamic radar cruise control with full-speed range (P. 247)  
• LDA (Lane Departure Alert with steering control) (P. 237)  
• Intuitive parking assist (if equipped) (P. 276)  
Navigation system-linked display area  
2
Displays the following items, which are linked to the navigation sys-  
tem:  
Street name  
When the navigation system is performing route guidance, the  
name of the next street will be displayed on the top of the display  
area.  
Route guidance to destination  
Displayed when the navigation system is performing route guid-  
ance. When approaching an intersection, an arrow will be displayed  
to indicate the suggested direction of travel.  
Compass  
Displays the direction of travel.  
112  
2. Instrument cluster  
Eco Driving Indicator/Tachometer  
Eco Driving Indicator  
Eco Driving Indicator Zone  
1
Display  
Eco driving ratio based on  
2
acceleration  
Zone of Eco driving  
3
Displayed content is the same  
as that displayed on the multi-  
information display (Eco Driving  
Indicator). For details, refer to P.  
107.  
Tachometer  
Displays the engine speed in revolutions per minute.  
113  
2. Instrument cluster  
Information display area  
Displays the following items in the appropriate situation:  
Warning/Message  
Alert from the LDA (Lane Departure Alert with steering control)  
Dynamic radar cruise control with full-speed range  
message  
Displayed when a suggestion/advice pop-up display is displayed on the  
multi-information display. (P. 106)  
2
message  
Displayed when a warning message is displayed on the multi-informa-  
tion display. (P. 444)  
Outside temperature  
Displayed in the following situations:  
• When the engine switch is turned to IGNITION ON mode  
• When the low outside temperature indicator is flashing  
Displayed content is the same as that displayed on the multi-information  
display. For details, refer to the explanation of the outside temperature  
display on the multi-information display. (P. 90)  
Hands-free system status  
Displayed when the hands-free system is operated.  
Audio system operation status  
Displayed when the audio system is operated.  
114  
2. Instrument cluster  
Head-up display  
The head-up display may seem dark or hard to see when viewed through  
sunglasses, especially polarized sunglasses.  
Adjust the brightness of the head-up display or remove your sunglasses.  
Display brightness  
The brightness of the head-up display can be adjusted on  
of the multi-  
information display. Also, it is automatically adjusted according to the ambient  
brightness.  
Enabling/disabling of the head-up display  
If the head-up display is disabled, it will remain disabled when the engine  
switch is turned off then back to IGNITION ON mode.  
Street name display  
Only street names which are included in the map data will be displayed.  
WARNING  
Before using the head-up display  
Check that the position and brightness of the head-up display image does  
not interfere with safe driving. Incorrect adjustment of the image’s position  
or brightness may obstruct the driver’s view and lead to an accident,  
resulting in death or serious injury.  
Do not continuously look at the head-up display while driving as you may  
fail to see pedestrians, objects on the road, etc. ahead of the vehicle.  
Caution for changing settings of the head-up display  
As the engine needs to be running while changing the settings of the head-  
up display, ensure that the vehicle is parked in a place with adequate venti-  
lation. In a closed area such as a garage, exhaust gases including harmful  
carbon monoxide (CO) may collect and enter the vehicle. This may lead to  
death or a serious health hazard.  
115  
2. Instrument cluster  
NOTICE  
To prevent damage to components  
Do not place any drinks near the head-  
up display projector. If the projector gets  
wet, electrical malfunctions may result.  
Do not place anything on or put stickers  
onto the head-up display projector.  
Doing so could interrupt head-up dis-  
play indications.  
2
Do not touch the inside of the head-up  
display projector or thrust sharp edges  
or the like into the projector.  
Doing so could cause mechanical mal-  
functions.  
When changing the settings of the head-up display  
To prevent battery discharge, ensure that the engine is running while the  
changing the settings of the head-up display.  

Related Topics

Popular Owner Manuals