Get Instrument cluster -> Multi-information display Guide for Toyota Avalon 4 Door Fifth Generation (2019-2022)

93

2. Instrument cluster

Multi-informat ion display

Summary of functions

The multi-information display presents the driver with a variety of driv-

ing-related data, such as the current outside temperature. The multi-

information display can also be used to change the display settings

and other settings.

2

Indicators (P. 84)

1

Driving assist system status display area

2

Displays the operational status of the following systems:

• Dynamic radar cruise control with full-speed range (P. 247)

• LDA (Lane Departure Alert with steering control) (P. 237)

Speed limit display (vehicles with a navigation system) (U.S.A.

3

only)

Clock

4

For clock settings, refer to “NAVIGATION AND MULTIMEDIA SYSTEM

OWNER’S MANUAL”.

Speedometer

5

The speedometer display can be enabled/disabled in

on the multi-

information display. (P. 100)

When

is selected, the speedometer may be displayed in the content

display area.

94

2. Instrument cluster

Content display area

6

A variety of information can be displayed by selecting a menu icon. Addi-

tionally, warning or suggestion/advice pop-up displays will be displayed in

some situations.

• Menu icon content (P. 96)

• Suggestion function (P. 106)

• Warning message (P. 444)

Odometer/trip meter (P. 106)

Shift position (P. 189)

7

8

9

Outside temperature (P. 90)

Menu icons (P. 96)

10

11

12

“ODO/TRIP” switch (P. 95)

Meter control switches (P. 94)

Using the multi-information display

◆ Using the content display area

The content display area is operated using the meter control

switches.

Scroll screens*, change the

1

displayed content* and move

the cursor

Press: Enter/Set

2

Press and hold: Reset/Dis-

play the next screen

Return to the previous

3

screen

Pressing and holding the switch will display the first screen of the

selected menu icon.

Call sending/receiving display

4

Linked with the hands-free system, sending or receiving call is dis-

played. For details regarding the hands-free system, refer to the “NAVI-

GATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.

*: When the screen can be scrolled or different content can be displayed,

a mark, such as an arrow, will be displayed to suggest which switch to

operate.

95

2. Instrument cluster

◆ Using the odometer/trip meter

Items in this area are operated using the “ODO/TRIP” switch.

Press: Change displayed item

Each time the switch is pressed,

the displayed item will be

changed.

Press and hold: Reset

Display the desired trip meter

and press and hold the switch to

reset the trip meter.

2

96

2. Instrument cluster

Menu icons

Select a menu icon to display its content.

Driving information (P. 97)

Select to display the following:

• Speedometer/driving range

• Fuel consumption

• Eco Driving Indicator/driving range

Driving assist system information

Select to perform the following:

Display the operational status of the following systems:

• Dynamic radar cruise control with full-speed range (P. 247)

• LDA (Lane Departure Alert with steering control) (P. 237)

Display the following navigation system-linked information (if equipped):

• Route guidance

• Compass display (heading-up display)

Audio system-linked display

Select to enable selection of an audio source or track on the multi-infor-

mation display using the meter control switches.

Vehicle information

Select to perform the following:

Display the following information:

• Tire inflation pressure (P. 395)

Enable/Disable the following systems:

• Parking assist (Intuitive parking assist) (if equipped) (P. 276)

• BSM (Blind Spot Monitor) function (P. 260)

• RCTA (Rear Cross Traffic Alert) function (P. 260)

These functions can also be enabled/disabled on

.

Settings display (P. 100)

Select to change the meter display settings and other settings.

Warning message display (P. 444)

Select to display warning messages and measures to be taken if a mal-

function is detected.

97

2. Instrument cluster

Driving information (

)

■ Speedometer/driving range

• Speedometer

• Driving range

Displays the driving range with remaining fuel.

When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

2

This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

■ Fuel consumption

Current fuel consumption

1

Displays the instantaneous cur-

rent fuel consumption.

Average fuel economy (after

2

start)

Displays the average fuel con-

sumption since engine start.*¹

Driving range

3

Displays the driving range with remaining fuel.*^{2, 3}

98

2. Instrument cluster

Gadget*⁴

4

The following items can be displayed by changing the settings for gad-

get content and fuel economy type on

. (P. 100)

Displayable item

Content

Gadget

content

Fuel economy

type

Trip

(after start)

Displays the average vehicle speed since

engine start.

Average

vehicle

speed

Displays the average vehicle speed since the

display was reset.*⁵

Total

(after reset)

Trip

(after start)

Displays the distance driven since vehicle

start.

Distance

Displays the distance driven since the display

was reset.*⁵

Total

(after reset)

Trip

(after start)

Displays the elapsed time since engine start.

Elapsed

time

Displays the elapsed time since the display

was reset.*⁵

Total

(after reset)

Average fuel economy

5

Displayed item (listed below) can be changed on the fuel economy type

screen of . (P. 100)

● Total (after reset)

Displays the average fuel consumption since the display was reset.*^{1, 5}

● Tank (after refuel)

Displays the average fuel consumption since the vehicle was refu-

eled.*^{1, 2}

99

2. Instrument cluster

*¹: Use the displayed fuel consumption as a reference only.

*²: When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

*³: This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

*⁴: The default setting is no display.

*⁵: This display can be reset by pressing and holding

played.

2

while it is dis-

■ Eco Driving Indicator/driving range

• Eco Driving Indicator

P. 107

• Driving range

Displays the driving range with remaining fuel.

When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

100

2. Instrument cluster

Settings display (

)

◆ Changing settings

Use the meter control switches on the steering wheel to change

settings.

1

Press

or

Operate the switches to select a desired item.

Press or press and hold

to select

.

2

3

.

The available settings will differ depending on if

is pressed or

pressed and held. Follow the instructions on the display.

◆ Setting items

■

LDA (Lane Departure Alert with steering control) (P. 237)

Press and hold to change the settings of the following items:

Item

Settings

Details

On

Off

Select to enable/disable steering

wheel assistance.

Steering assist

Alert sensitivity

Sway warning

(High)

Select to set the warning sensi-

tivity.

(Normal)

On

Off

Select to enable/disable the vehi-

cle sway warning.

(High)

Select to set the vehicle sway

warning sensitivity.

Sway sensitivity

(Normal)

(Low)

101

2. Instrument cluster

■

PCS (Pre-Collision System) (P. 226)

Press to enable/disable the pre-collision system.

Item

Settings

Details

On

Off

Select to enable/disable the pre-

collision system.

PCS

Press and hold

Item

to change the settings of the following item:

2

Settings

(Far)

Details

Warning sensitivity

(Warning timing)

Select to change the warning

timing.

(Middle)

(Near)

■

BSM (Blind Spot Monitor) (P. 260)

Press to enable/disable the Blind Spot Monitor function.

Item

Settings

Details

On

Off

Select to enable/disable the

Blind Spot Monitor function.

BSM

Press and hold

Item

to change the settings of the following item:

Settings

(Bright)

Details

Outside rear view

Select to change the brightness

of the outside rear view mirror

indicators.

mirror

indicator

(Dim)

brightness

(Early)

(Interme-

diate)

(Late)

Select to change the alert sensi-

tivity for an approaching vehicle.

Sensitivity

(Only

when

vehicle

detected

in blind

spot)

102

2. Instrument cluster

■

RCTA (Rear Cross Traffic Alert) (P. 260)

Press

to enable/disable the Rear Cross Traffic Alert function.

Item

Settings

Details

On

Off

Select to enable/disable the Rear

Cross Traffic Alert function.

RCTA

Press and hold

Item

to change the settings of the following item:

Settings

(Low)

Details

RCTA buzzer vol-

ume

Select to change the volume of

the RCTA buzzer.

(Medium)

(Loud)

■

ICS (Intelligent Clearance Sonar) (if equipped) (P. 284)

Press to enable/disable the Intelligent Clearance Sonar.

Item

Settings

Details

On

Off

Select to enable/disable the

Intelligent Clearance Sonar sys-

tem.

ICS

■

Parking assist (Intuitive parking assist) (if equipped)

(P. 276)

Press

to enable/disable the Intuitive parking assist.

Item

parking

Settings

Details

On

Off

Intuitive

assist

Select to enable/disable the intui-

tive parking assist.

Press and hold

Item

to change the settings of the following item:

Settings

(Low)

Details

Select to change the volume of

the intuitive parking assist

buzzer.

Volume

(Medium)

(Loud)

103

2. Instrument cluster

■

HUD (Head-up display) (if equipped) (P. 109)

Press

to enable/disable the head-up display.

Item

Settings

Details

On

Off

Select to enable/disable the

head-up display.

HUD

Press and hold

Item

to change the settings of the following items:

Settings

Details

2

Select to adjust the brightness/

position of the head-up display.

• Press the

adjust the display brightness.

• Press the switch to

/

switch to

HUD Brightness/Position

/

adjust the display position.

Select to change the display

between the following:

• Eco Driving Indicator

• Tachometer

Tachometer

settings

• No content

HUD Driving

support

Navigation

system

Select to enable/disable head-up

display content.

Driving Assist

Compass

Select to adjust the angle of the

head-up display.

Rotation

Press the

/

switch to

adjust the display angle.

104

2. Instrument cluster

■

Vehicle settings

Press and hold

to change the settings of the following items:

Item

Settings

Details

TPWS (Tire pressure warning system) (P. 395)

Select to initialize the tire pres-

sure warning system. To per-

form initialization, press and hold

Set pressure (tire pressure warning sys-

tem initialization)

the

switch.

Before performing initialization,

make sure to adjust the inflation

pressure of each tire to the spec-

ified level. (P. 396)

Select to register the ID codes of

the tire pressure sensors to the

tire pressure warning system. To

register the ID codes, press and

Change wheel (register tire pressure

warning system sensor ID codes)

hold the

switch.

(P. 397)

Scheduled maintenance display

Maintenance data reset

Select to reset the message indi-

cating maintenance is required,

after the required maintenance is

performed. (P. 373)

105

2. Instrument cluster

■

Meter settings

Press and hold

to change the settings of the following items:

Item

Language

Units

Settings

Details

Select to change the language

displayed.

Select to change the units of

measure displayed.

On

Off

On

Off

2

Select to enable/disable the Eco

Driving Indicator Light. (P. 107)

(Eco Driving

Indicator Light)

Select to enable/disable the

speedometer display.

Speedometer

No display

Average vehicle

speed

Gadget content

Select to turn the display of a

gadget.

Distance

Elapsed time

Trip (after start)*¹

Total (after reset)

Select to change the average

fuel consumption display and an

item to be displayed as gadget.

Fuel economy type

Tank

(after refuel)*²

Select to turn the multi-informa-

tion display off.

To turn the multi-information dis-

play on again, press any direc-

Multi-information display off

tion switch (

/

).

Intersection guid-

ance (if equipped)

Select to enable/disable the pop-

up display.

Pop-up display

Default setting

Incoming calls

Brightness adjust-

ment

Select to reset the meter display

settings to the default setting.

*¹: Selecting this item will only change the gadget.

*²: Selecting this item will turn the display of the gadget off.

106

2. Instrument cluster

Odometer/trip meter

■ Odometer

Displays the total distance the vehicle has been driven.

■ Trip meter A/trip meter B

Displays the distance the vehicle has been driven since the meter

was last reset. Trip meters A and B can be used to record and dis-

play different distances independently.

To reset, display the desired trip meter and press and hold the “ODO/

TRIP” switch.

Suggestion function

Displays suggestions to the driver in the following situations. To select

a response to a displayed suggestion, use the meter control switches.

The suggestion function can be turned on/off.

(Customizable features:P. 505)

■ Suggestion to turn off the headlights

If the headlights are left on for a certain amount of time after the

engine switch has been turned off, if the headlight switch is in the

“AUTO” position, a suggestion message will be displayed asking if

you wish to turn the headlights off. To turn the headlights off, select

“Yes”.

If a front door is opened after the engine switch is turned off, this sug-

gestion message will not be displayed.

107

2. Instrument cluster

■Eco Driving Indicator

Eco Driving Indicator Light

1

During Eco-friendly acceleration (Eco

driving), the Eco Driving Indicator Light

will turn on. When the acceleration

exceeds the Zone of Eco driving, or

when the vehicle is stopped, the light

turns off.

Eco Driving Indicator Zone Display

2

Suggests the Zone of Eco driving with

current Eco driving ratio based on

acceleration.

2

Eco driving ratio based on acceleration

3

If the acceleration exceeds the Zone of

Eco driving, the right side of the Eco

Driving Indicator Zone Display will illu-

minate.

Zone of Eco driving

4

Eco Driving Indicator will not operate under the following conditions:

●The shift lever is in any position other than D.

●A paddle shift switch (if equipped) is operated.

●Neither normal mode nor Eco drive mode is selected. (P. 305)

●The vehicle speed is approximately 80 mph (130 km/h) or higher.

■Suspension of the settings display

●Some settings cannot be changed while driving. When changing settings,

park the vehicle in a safe place.

●If a warning message is displayed, operation of the settings display will be

suspended.

■Tire pressure

●It may take a few minutes to display the tire inflation pressure after the

engine switch is turned to IGNITION ON mode. It may also take a few min-

utes to display the tire inflation pressure after inflation pressure has been

adjusted.

●“---” may be displayed if the tire position information cannot be determined

due to unfavorable radio wave conditions.

●Tire inflation pressure changes with temperature. The displayed values may

also be different from the values measured using a tire pressure gauge.

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

■Customization

Some functions can be customized. (P. 100, 505)

108

2. Instrument cluster

WARNING

■Caution for use while driving

●When operating the multi-information display while driving, pay extra

attention to the safety of the area around the vehicle.

●Do not look continuously at the multi-information display while driving as

you may fail to see pedestrians, objects on the road, etc. ahead of the

vehicle.

■The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal

information display. At extremely low temperatures, the information display

monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or injury.

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that

the vehicle is parked in a place with adequate ventilation. In a closed area

such as a garage, exhaust gases including harmful carbon monoxide (CO)

may collect and enter the vehicle. This may lead to death or a serious

health hazard.

NOTICE

■While setting up the display

To prevent battery discharge, ensure that the engine is running while setting

up the display features.

Instrument cluster -> Multi-information display for Your Toyota Avalon 4 Door Fifth Generation (2019-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals