Air conditioning system -> Manual air conditioning system - Control for Your Toyota Avensis 4 Door Second Generation (2004-2009)

Machine Translated by Google  
AIR CONDITIONING SYSTEM  
240  
Manual air conditioning system –  
– Control  
1. "A/C" button (on some models)  
2. Air supply controller  
4. Fan speed controller 5. Air  
flow controller  
3. Temperature controller  
Machine Translated by Google  
AIR CONDITIONING SYSTEM  
241  
Fan speed controller  
Set the fan speed by turning the knob - to the right to  
increase, to the left to decrease.  
Temperature controller  
Set the temperature by turning the knob - to  
the right to increase, to the left to decrease.  
Air flow controller  
Select the air flow vents by turning the knob.  
1. Panel – Air flows mainly from the vents in the  
instrument panel.  
2. Dual Level – Air flows from both floor vents and  
instrument panel vents  
3. Floor – Air flows mainly from the wind-  
holes near the floor.  
4. Floor/Windshield - Air flows mainly from the floor  
vents and the windshield vents.  
5. Windshield – Air flows mainly from the windshield  
vents.  
This position allows you to automatically select the  
FRESH air supply. This serves to clean the  
windshield faster.  
To return the setting to RECIRCULATION mode,  
press the air supply button again.  
Machine Translated by Google  
AIR CONDITIONING SYSTEM  
242  
Turn the airflow control to the windshield position to turn  
on the air conditioner for defrosting. At that moment, the  
"A/C" button indicator lights up regardless of whether  
the "A/C" button has been pressed or not. This serves to  
clean the windshield faster.  
Turn off the air conditioning itself by pressing the "A/C"  
button again.  
If the "A/C" button is not pressed, selecting another air  
flow mode will turn off the air conditioner.  
6. Between Floor and Floor/Windshield –  
Air flows mainly from the floor vents.  
7. Between Floor/Windshield and Windshield –  
Air flows mainly from the vents near the windshield.  
For details on setting the airflow controller – see "–  
Setting the airflow controller" on page 244 in this chapter.  
Machine Translated by Google  
AIR CONDITIONING SYSTEM  
243  
"A/C" button  
You can turn on the air conditioning by pressing the "A/C" button.  
The indicator on the "A/C" button lights up. To turn off  
the air conditioner, press the button again.  
Air intake controller  
Press the button to adjust the air supply.  
1. Recirculation (indicator on) – Air circulates inside  
the vehicle.  
2. Fresh (indicator off) – Air is in  
the vehicle is sucked in from the outside.  
To prevent fogging of the windshield, the air supply  
mode may change automatically to FRESH, depending  
on the conditions of the air conditioning system.  
Machine Translated by Google  
AIR CONDITIONING SYSTEM  
244  
– Setting the air flow controller