Machine Translated by Google
AIR CONDITIONING SYSTEM
245
– Operating instructions
Heating
• To cool down your Toyota after parking in the hot sun,
drive for a few minutes with the windows open. The
venting of hot air will allow the air conditioner to cool
the interior faster.
Adjust drivers for best performance:
Fan Speed - Any setting except "OFF"
Temperature - Towards WARM (red)
Air Supply - FRESH (from outside)
Airflow - FLOOR
Air conditioning - OFF
• Make sure that the air intake grilles in front of the
windshield are not blocked (e.g. by leaves, snow, etc.).
• Do not blow cold air on the windshield in wet weather.
The windshield could fog up due to the difference in
air temperature on the inside and outside of the
windshield.
• For a quick warm-up, select air recirculation for a few
minutes. To prevent the windows from fogging up,
select the fresh air intake after the vehicle interior has
warmed up.
• Press to remove moisture during heating
"A/C" button.
• Keep the space under the front seats empty to allow air
circulation in the vehicle.
• When defrosting or defogging the windshield, select floor/
windshield airflow to warm the vehicle interior.
• In cold weather, run the fan on full speed for about a
minute to help clear the intake vents of snow or
moisture. This can reduce window fogging.
Air conditioning
• Close all windows when driving in dusty areas. If dust
enters the vehicle interior even after the windows are
closed, we recommend that you set the air supply
control to FRESH and the fan speed control to any
position except "OFF".
Adjust drivers for best performance:
Fan Speed - Any setting
except "OFF"
Temperature - Towards COOL (blue)
Air Supply - FRESH (from outside)
Air flow – PANEL
Air conditioning - ON
• If the vehicle in front of you is driving on a dusty road or
you are driving in wind and dust, then we recommend
temporarily setting the air supply control to
RECIRCULATION mode, which closes the external
supply and prevents dust from entering the vehicle
interior.
• For quick cooling, select air recirculation for a few minutes.
Ventilation
Adjust drivers for best performance:
Fan Speed - Any setting except "OFF"
Temperature - Towards COOL (blue)
Air supply - FRESH (from outside)
Air flow – PANEL
Air conditioning - OFF
English 