Air conditioning system -> Operating instructions (Automatic) for Your Toyota Avensis 4 Door Second Generation (2004-2009)

Machine Translated by Google  
AIR CONDITIONING SYSTEM  
252  
– Setting the air flow controller  
– Operating instructions  
To cool down your Toyota after parking in the hot sun,  
drive for a few minutes with the windows open.  
Venting hot air will allow the air conditioner to cool  
the interior faster.  
Make sure that the air intake grilles in front of the  
windshield are not blocked (e.g. by leaves, snow,  
etc.).  
Do not blow cold air on the windshield in wet weather.  
The windshield could fog up due to the difference in  
air temperature on the inside and outside of the  
windshield.  
Keep the space under the front seats empty to allow air  
circulation in the vehicle.  
In cold weather, run the fan on full speed for about a  
minute to help clear the intake vents of snow or  
moisture. This can reduce window fogging.  
Close all windows when driving in dusty areas. If dust  
enters the vehicle interior even after the windows are  
closed, we recommend that you set the air supply  
control to FRESH and the fan speed control to any  
position except "OFF".  
If the vehicle in front of you is driving on a dusty road or  
you are driving in wind and dust, then we recommend  
temporarily setting the air supply control to  
RECIRCULATION mode, which closes the external  
supply and prevents dust from entering the interior of  
the vehicle.  
Machine Translated by Google  
AIR CONDITIONING SYSTEM  
253  
Ventilation  
Heating  
Adjust drivers for best performance:  
Adjust drivers for best performance:  
– Automatic control  
– Automatic control  
Press the "AUTO" button.  
Press the "AUTO" button.  
Temperature – To the desired temperature  
Temperature – Towards a low temperature  
Air supply - FRESH (from outside)  
Air conditioning - OFF  
Air supply - FRESH (from outside)  
Air conditioning - OFF  
– Manual control  
– Manual control  
Fan speed – To the desired speed  
Fan speed – To the desired speed  
Temperature – Towards high temperature  
Temperature – Towards a low temperature  
Air supply - FRESH (from outside)  
Airflow - FLOOR  
Air conditioning - OFF  
Air supply - FRESH (from outside)  
Air flow – PANEL  
Air conditioning - OFF  
For a quick warm-up, select air recirculation for  
a few minutes. To prevent the windows from  
fogging up, select the fresh air intake after the  
vehicle interior has warmed up.  
Demisting and defrosting  
– The inside of the windshield  
Adjust drivers for best performance:  
– Automatic control  
Press to remove moisture during heating  
"A/C" button.  
Press the "AUTO" button.  
When defrosting or defogging the windshield, select floor/  
Temperature – Towards high temperature  
for heating; to low temperature  
for cooling  
windshield airflow to warm the vehicle interior.  
Air supply - FRESH (from outside)  
Airflow - WINDSHIELD  
Air conditioning  
Adjust drivers for best performance:  
– Automatic control  
– Manual control  
Fan speed – To the desired speed  
Press the "AUTO" button.  
Temperature – Towards high temperature  
for heating; to low temperature  
for cooling  
Temperature – To the desired temperature  
Air supply - FRESH (from outside)  
Air conditioning - ON  
Air supply - FRESH (from outside)  
Airflow - WINDSHIELD  
– Manual control  
Fan speed – To the desired speed  
When you press the windshield airflow button,  
the FRESH air intake will automatically be  
selected. This serves to clean the windshield  
faster.  
Temperature – Towards a low temperature  
Air supply - FRESH (from outside)  
Air flow – PANEL  
Air conditioning - ON  
To return the setting to RECIRCULATION mode, press  
the air supply button again.  
For quick cooling, select air recirculation for a few  
minutes.  
Machine Translated by Google  
254  
AIR CONDITIONING SYSTEM  
Pressing the air flow button on the windshield  
Pressing the air flow button on the windshield  
turns on the air conditioning for defrosting.  
At that moment, the "A/C" button indicator lights up  
turns on the air conditioning for defrosting.  
At that moment, the "A/C" button indicator lights up  
regardless of whether the "A/C" button has been  
regardless of whether the "A/C" button has been  
pressed or not. This serves to clean the windshield faster.  
pressed or not. This serves to clean the windshield faster.  
Turn off the air conditioning itself by pressing  
the "A/C" button again.  
Turn off the air conditioning itself by pressing  
the "A/C" button again.  
If the "A/C" button is not pressed, selecting another air  
flow mode will turn off the air conditioner.  
If the "A/C" button is not pressed, selecting another air  
flow mode will turn off the air conditioner.  
In wet weather, do not blow cold air onto the windshield  
- the difference between the inside and outside  
When defrosting the windshield, select floor/windshield  
airflow to warm the vehicle interior.  
temperature could worsen fogging.  
– The outside of the windshield  
Adjust drivers for best performance:  
– Automatic control  
Press the "AUTO" button.  
Temperature – Towards high temperature  
Air supply - FRESH (from outside)  
Airflow - WINDSHIELD  
– Manual control  
Fan speed – To the desired speed  
Temperature – Towards high temperature  
Air supply - FRESH (from outside)  
Airflow - WINDSHIELD  
When you press the windshield airflow button,  
the FRESH air intake will automatically be  
selected. This serves to clean the windshield  
faster.  
To return the setting to RECIRCULATION mode, press  
the air supply button again.