Get Driving -> Headlight switch Guide for Toyota Aygo SUV Second Generation (2015-2021)

197

4-3. Operating the lights and wipers

Headlight switch

The headlights can be operated manually or automatically.

Operating instructions

Operating the

switch turns on the lights as follows:

1

The daytime running lights

turn on. ( P. 199)



2

The front position, tail,

license plate and instru-

ment panel lights turn on.

3

4

The headlights and all

lights listed above turn on.

4

(If equipped)

Vehicles without a smart

entry & start system: The

headlights and all the

lights listed above (except

daytime running lights)

turn on and off automati-

cally (when the engine

switch is in the “ON” posi-

tion.)

Vehicles with a smart entry & start system: The headlights and

all the lights listed above (except daytime running lights) turn

on and off automatically (when the engine switch is in IGNI-

TION ON mode.)

198

4-3. Operating the lights and wipers

Turning on the high beam headlights

1

With the headlights on, push

the lever away from you to turn

on the high beams.

Pull the lever toward you to the

center position to turn the high

beams off.

2

Pull the lever toward you and

release it to flash the high

beams once.

You can flash the high beams with the headlights on or off.

Manual headlight leveling dial

The level of the headlights can be adjusted according to the number

of passengers and the loading condition of the vehicle.

1

Raises the level of the head-

lights

2

Lowers the level of the head-

lights

■ Guide to dial settings

Loading condition

Driver only

Control switch position

0

Driver + one passenger in the front

seat

0

All passengers

1.5

2.5

All passengers + full luggage loading

to the luggage room

Driver + full luggage loading to the

luggage room

3

199

4-3. Operating the lights and wipers

Follow me home system (if equipped)

This system allows the headlights to be turned on for 30 seconds

when the engine switch is turned to the “LOCK” position (vehicles

without a smart entry & start system) or off (vehicles with a smart

entry & start system).

Pull the lever toward you and

release it with the light switch is in

or

after turning the

engine switch to the “LOCK” posi-

tion (vehicles without a smart

entry & start system) or off (vehi-

cles with a smart entry & start sys-

tem).

Pull the lever toward you and release it again to turn off the lights.

4

■Daytime running light system

To make your vehicle more visible to other drivers during daytime driving, the

daytime running lights turn on automatically whenever the engine is started.

Daytime running lights are not designed for use at night.

■Headlight control sensor (if equipped)

The sensor may not function properly if an

object is placed on the sensor, or anything

that blocks the sensor is affixed to the

windshield.

Doing so interferes with the sensor

detecting the level of ambient light and

may cause the automatic headlight sys-

tem to malfunction.

200

■Automatic light off system (if equipped)

●When the light switch is in or

4-3. Operating the lights and wipers

:

The headlights and front fog lights turn off after the engine switch is turned

to the “LOCK” position (vehicles without a smart entry & start system) or off

(vehicles with a smart entry & start system).

●When the light switch is in

:

The headlights and all lights turn off after the engine switch is turned to the

“LOCK” position (vehicles without a smart entry & start system) or off (vehi-

cles with a smart entry & start system).

■Light reminder buzzer

 Vehicles without a smart entry & start system

A buzzer sounds when the engine switch is turned to the “LOCK” position, the

driver’s door is opened while the lights are turned on.

 Vehicles with a smart entry & start system

A buzzer sounds when the engine switch is turned off and the driver’s door is

opened while the lights are turned on.

■Battery-saving function (if equipped)

In the following conditions, the remaining lights will go off automatically after

20 minutes in order to prevent the vehicle battery from being discharged:

●The headlights and/or tail lights are on.

●Vehicles without a smart entry & start system: The engine switch is turned to

the “ACC” position or turned off.

Vehicles with a smart entry & start system: The engine switch is turned to

ACCESSORY mode or turned off.

●The light switch is in

or

.

This function will be canceled in any of the following situations:

●Vehicles without a smart entry & start system: When the engine switch is

turned to the “ON” position.

Vehicles with a smart entry & start system: When the engine switch is turned

to IGNITION ON mode.

●When the light switch is operated.

●When a door is opened or closed.

NOTICE

■To prevent battery discharge

Do not leave the lights on longer than necessary when the engine is not

running.

Driving -> Headlight switch for Your Toyota Aygo SUV Second Generation (2015-2021)

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals