Get Driving -> Operating the lights and wipers Guide for Toyota Aygo SUV Third Generation (2022-2026)

231

4-3. Operating the lights and wipers

Headlight switch

The headlights can be operated manually or automatically.

Operating instructions

Operating the

switch turns on the lights as follows:

1

The daytime running lights

turn on. ( P. 233)



2

The front position, tail,

license plate and instru-

ment panel lights turn on.

3

4

The headlights and all

lights listed above turn on.

4

(If equipped)

Vehicles without a smart

entry & start system: The

headlights and all the

lights listed above (except

daytime running lights)

turn on and off automati-

cally (when the engine

switch is in the “ON” posi-

tion.)

Vehicles with a smart entry & start system: The headlights and

all the lights listed above (except daytime running lights) turn

on and off automatically (when the engine switch is in IGNI-

TION ON mode.)

AYGO_OM_Europe_OM9A012E

232

4-3. Operating the lights and wipers

Turning on the high beam headlights

1

With the headlights on, push

the lever away from you to turn

on the high beams.

Pull the lever toward you to the

center position to turn the high

beams off.

2

Pull the lever toward you and

release it to flash the high

beams once.

You can flash the high beams with the headlights on or off.

Manual headlight leveling dial

The level of the headlights can be adjusted according to the number

of passengers and the loading condition of the vehicle.

1

Raises the level of the head-

lights

2

Lowers the level of the head-

lights

■ Guide to dial settings

Loading condition

Driver only

Control switch position

0

Driver + one passenger in the front

seat

0

All passengers

1.5

2.5

All passengers + full luggage loading

to the luggage room

Driver + full luggage loading to the

luggage room

3

AYGO_OM_Europe_OM9A012E

233

4-3. Operating the lights and wipers

Follow me home system (if equipped)

This system allows the headlights to be turned on for 30 seconds

when the engine switch is turned to the “LOCK” position (vehicles

without a smart entry & start system) or off (vehicles with a smart

entry & start system).

Pull the lever toward you and

release it with the light switch is in

or

after turning the

engine switch to the “LOCK” posi-

tion (vehicles without a smart

entry & start system) or off (vehi-

cles with a smart entry & start sys-

tem).

Pull the lever toward you and release it again to turn off the lights.

4

■Daytime running light system

To make your vehicle more visible to other drivers during daytime driving, the

daytime running lights turn on automatically whenever the engine is started.

Daytime running lights are not designed for use at night.

■Headlight control sensor (if equipped)

The sensor may not function properly if an

object is placed on the sensor, or anything

that blocks the sensor is affixed to the

windshield.

Doing so interferes with the sensor

detecting the level of ambient light and

may cause the automatic headlight sys-

tem to malfunction.

AYGO_OM_Europe_OM9A012E

234

■Automatic light off system (if equipped)

●When the light switch is in or

4-3. Operating the lights and wipers

:

The headlights and front fog lights turn off after the engine switch is turned

to the “LOCK” position (vehicles without a smart entry & start system) or off

(vehicles with a smart entry & start system).

●When the light switch is in

:

The headlights and all lights turn off after the engine switch is turned to the

“LOCK” position (vehicles without a smart entry & start system) or off (vehi-

cles with a smart entry & start system).

■Light reminder buzzer

 Vehicles without a smart entry & start system

A buzzer sounds when the engine switch is turned to the “LOCK” position, the

driver’s door is opened while the lights are turned on.

 Vehicles with a smart entry & start system

A buzzer sounds when the engine switch is turned off and the driver’s door is

opened while the lights are turned on.

■Battery-saving function (if equipped)

In the following conditions, the remaining lights will go off automatically after

20 minutes in order to prevent the vehicle battery from being discharged:

●The headlights and/or tail lights are on.

●Vehicles without a smart entry & start system: The engine switch is turned to

the “ACC” position or turned off.

Vehicles with a smart entry & start system: The engine switch is turned to

ACCESSORY mode or turned off.

●The light switch is in

or

.

This function will be canceled in any of the following situations:

●Vehicles without a smart entry & start system: When the engine switch is

turned to the “ON” position.

Vehicles with a smart entry & start system: When the engine switch is turned

to IGNITION ON mode.

●When the light switch is operated.

●When a door is opened or closed.

NOTICE

■To prevent battery discharge

Do not leave the lights on longer than necessary when the engine is not

running.

AYGO_OM_Europe_OM9A012E

235

4-3. Operating the lights and wipers

Fog light switch

The fog lights secure excellent visibility in difficult driving con-

ditions, such as in rain and fog.

 Front and rear fog light switch

1

Turns the front and rear

fog lights off

2

Turns the front fog lights

on

3

Turns both front and rear

fog lights on

On some models: Releasing the

4

switch ring returns it to

.

Operating the switch ring again

turns only the rear fog lights off.

AYGO_OM_Europe_OM9A012E

236

4-3. Operating the lights and wipers

 Rear fog light switch

1

Turns the rear fog lights off

2

Turns the rear fog lights on

On some models: Releasing the

switch ring returns it to

.

Operating the switch ring again

turns only the rear fog lights off.

■Fog lights can be used when

 Vehicles with a front and rear fog light switch

Front fog lights: The headlights or the front position lights are turned on.

Rear fog lights: The front fog lights are turned on.

 Vehicles with a rear fog light switch

The headlights are turned on.

AYGO_OM_Europe_OM9A012E

237

4-3. Operating the lights and wipers

Windshield wiper and washer

Operating the wiper lever

Operating the

lever operates the wipers or washer as follows.

1

Off

2

Intermittent

wiper operation

windshield

3

4

5

Low speed windshield

wiper operation

High speed windshield

wiper operation

Temporary operation

4

6

Washer/wiper dual operation

Pulling the lever operates the wip-

ers and washer.

Wiper will automatically operate a

couple of times after the washer

squirts.

AYGO_OM_Europe_OM9A012E

238

4-3. Operating the lights and wipers

■The windshield wiper and washer can be operated when

 Vehicles without a smart entry & start system

The engine switch is in the “ON” position.

 Vehicles with a smart entry & start system

The engine switch is in IGNITION ON mode.

■If no windshield washer fluid sprays

Check that the washer nozzles are not blocked, if there is washer fluid in the

windshield washer fluid reservoir.

WARNING

■Caution regarding the use of washer fluid

When it is cold, do not use the washer fluid until the windshield becomes

warm. The fluid may freeze on the windshield and cause low visibility. This

may lead to an accident, resulting in death or serious injury.

NOTICE

■When the windshield is dry

Do not use the wiper, as they may damage the windshield.

■When the washer fluid tank is empty

Do not operate the switch continually as the washer fluid pump may over-

heat.

■To prevent battery discharge

Do not leave the wiper on longer than necessary when the engine is off.

AYGO_OM_Europe_OM9A012E

239

4-3. Operating the lights and wipers

Rear window wiper and washer

Operating the

lows:

switch operates the rear wiper or washer as fol-

1

Off

2

Normal window wiper

operation

3

4

Washer/wiper dual opera-

tion

Washer operation

4

■The rear window wiper and washer can be operated when

 Vehicles without a smart entry & start system

The engine switch is in the “ON” position.

 Vehicles with a smart entry & start system

The engine switch is in IGNITION ON mode.

■If no washer fluid sprays

Check that the washer nozzle is not blocked, if there is washer fluid in the

washer fluid reservoir.

AYGO_OM_Europe_OM9A012E

240

4-3. Operating the lights and wipers

NOTICE

■When the rear window is dry

Do not use the wiper, as it may damage the rear window.

■When the washer fluid tank is empty

Do not operate the switch continually as the washer fluid pump may over-

heat.

■To prevent battery discharge

Do not leave the wiper on longer than necessary when the engine is off.

AYGO_OM_Europe_OM9A012E

Driving -> Operating the lights and wipers for Your Toyota Aygo SUV Third Generation (2022-2026)

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals