2025-2026 Toyota bZ4X SUV Electric Vehicle system -> Charging methods User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Electric Vehicle system -> Charging methods for Your Toyota bZ4X SUV Second Generation (2025-2026)

98  
2-2. Charging  
WARNING  
Charging methods  
Do not connect to a power strip.  
The following methods can  
be used to charge the trac-  
tion battery.  
Types of charging meth-  
ods  
Use of a block heater for  
AC charging (P.105)  
charging is prohibited.  
This is a charging method used  
when charging from an AC out-  
let with the AC charging cable or  
charging that uses AC charger.  
Make sure to connect the  
charging connector and AC  
charging inlet directly. Do not  
connect a converting adaptor or  
extension cord between the  
charging connector and AC  
charging inlet.  
By setting charging schedule, it is  
also possible to charge at the  
desired date and time. (P.118)  
DC charging (P.113)  
This is a charging method that  
uses a DC charger that com-  
plies with SAE J 1772. The trac-  
tion battery can be charged in a  
shorter time than AC charging.  
SAE is an abbreviation for an  
industrial standard issued by the  
Society of Automotive Engi-  
neers.  
Charging-linked functions  
This vehicle is equipped with  
several functions that are linked  
with charging.  
My Room Mode (P.129)  
When the charging cable is con-  
nected to the vehicle, electrical  
components such as the air con-  
ditioning system and audio sys-  
Owners Manual_USA_M42C01_en  
99  
2-2. Charging  
tem can be used by the power  
supply from an external power  
source*.  
When this control operates,  
charging schedule settings  
are ignored and charging  
starts immediately.  
*
: Depending on the situation, elec-  
Traction battery cooler  
tricity of the traction battery may  
be consumed.  
When the traction battery is hot  
and the AC charging cable is  
connected to the vehicle, this  
function cools the traction bat-  
tery to protect it.  
Traction battery heater  
When the outside temperature  
is low and the charging cable is  
connected to the vehicle, this  
function automatically warms  
the traction battery until it  
reaches or exceeds a certain  
temperature.  
2
The function may operate when  
continuously driving at high  
speeds such as driving on high-  
ways or freeways, or during DC  
charging.  
The operation of this function  
is stopped automatically when  
the charging cable is discon-  
nected or if the charging cable  
is left connected to the vehicle  
for approximately 3 days.  
Using My Room Mode during  
DC charging  
P.130  
Traction battery heater  
Traction battery heater may oper-  
ate when charging is not being  
performed.  
When the charging schedule  
is used (P.118), this func-  
tion will operate according to  
the schedule settings.  
When Traction battery heater is  
operating, the charging indicator  
will illuminate.  
Traction battery warming  
When Traction battery heater is  
operating during charging, the  
charging may take longer than  
normal.  
control  
This control operates after the  
charging cable remains con-  
nected to the vehicle for approx-  
imately 3 days and the traction  
battery heater automatically  
stops. It automatically insulates  
the traction battery in extremely  
low temperatures.  
The remaining charge of the trac-  
tion battery declines when the  
traction battery heater operates, it  
might be necessary to recharge  
the traction battery again in order  
to supplement the remaining  
charge.  
Traction battery cooler  
For AC charging: Traction battery  
cooler settings can be changed on  
the multi-information display.  
(P.100)  
This control stops 31 days  
after the charging cable is  
connected, even if it is still  
connected to the vehicle.  
The AC charging indicator will illu-  
Owners Manual_USA_M42C01_en  

Related Topics

Popular Owner Manuals