Get Before driving -> Favorite settings Guide for Toyota C-Hr SUV Second Generation (2024-2026)

190

4-6.Favorite settings

4-6. Favorite settings

 The driver’s seat belt has

Driving position mem-

been unfastened.

*

ory

*

: If equipped

This feature automatically

adjusts the positions of the

driver’s seat and outside

rear view mirrors to make

entering and exiting the

vehicle easier or to suit your

preferences.

When any of the following has

been performed, the driver’s

seat automatically return to it

original position.

Driving positions can be

recorded for 3 drivers that

has been registered for My

Settings.

 The power switch has been

turned to ACC or ON.

When electronic key assign-

ment is registered for My

Settings, the driving posi-

tion for each driver can be

recalled (memory recall

function).

 The driver’s seat belt has

been fastened.

IOperation of the power easy

access system

When exiting the vehicle, the power

easy access system may not oper-

ate if the seat is already close to the

rearmost position, etc.

For details about My Set-

tings, please refer to P.193.

ICustomization

Enabling easier driver

entry and exit (power easy

access system)

The seat movement amount set-

tings of the power easy access sys-

tem can be customized.

(Customizable features: P.527)

When all of the following have

been performed, the driver’s

seat is automatically adjusted to

a position that allows driver to

enter and exit the vehicle easily.

WARNING

IWhile the power easy access

system is operating the seat

is moving

Be careful not to get body parts or

luggage caught. Failure to do so

may cause an injury or damage to

the luggage.

 The shift position has been

shifted to P.

 The power switch has been

turned to off.

191

4-6. Favorite settings

Recording a driving posi-

tion into memory button

WARNING

ISeat adjustment caution

I

Recording procedure

Take care during seat adjustment

so that the seat does not strike

the rear passenger or squeeze

your body against the steering

wheel.

1 Check that the shift position

is in P.

2 Turn the power switch to ON.

3 Adjust the driver’s seat and

outside rear view mirrors to

the desired positions.

Recalling a driving posi-

tion

1 Check that the shift position

4 While pressing the “SET” but-

ton, or within 3 seconds after

the “SET” button is pressed,

press button “1” or “2” until

the buzzer sounds.

is in P.

2 Turn the power switch to ON.

3 Press one of the buttons for

the driving position you want

to recall until the buzzer

sounds.

4

If the selected button has already

been preset, the previously

recorded position will be overwrit-

ten.

ITo stop the position recall oper-

ation part-way through

ISeat position that can be mem-

orized (P.174)

The adjusted positions other than

the position adjusted by lumbar sup-

port switch can be recorded.

Perform any of the following:

GPress the “SET” button.

GPress button “1” or “2”.

GOperate any of the seat adjust-

ment switches.

IIn order to correctly use the

driving position memory func-

tion

IUsing the voice control system

(if equipped)

If a seat position is already in the

furthest possible position and the

seat is operated in the same direc-

tion, the recorded position may be

slightly different when it is recalled.

The following operations can be

performed using the voice control

system:

GDriving position registration

192

4-6. Favorite settings

GDriving position recall (only when

Recalling a driving posi-

tion automatically when

getting in the vehicle

(memory recall function)

(driver’s seat only)

the shift position is in P)

For details, refer to the “MULTIME-

DIA OWNER’S MANUAL”.

IOperating the driving position

memory after turning the power

switch to off

Recorded seat positions can be

activated up to 180 seconds after

the driver’s door is opened and

another 60 seconds after it is closed

again.

I

When an individual is iden-

tified using My Settings:

The driving positions can be

automatically recalled for each

driver registered in My Settings.

(P.194)

IWhen recalling the driving posi-

tion

Take care so that a head restraint

does not contact the ceiling or a sun

visor.

 Driving position registration

procedure

IIf the 12-volt battery is discon-

nected

When the shift position is shifted to

P after driving the vehicle, the cur-

rent driving position will be

recorded.

The memorized positions are

erased.

IWhen the recorded seat posi-

tion cannot be recalled

 Driving position recall proce-

The seat position may not be

recalled in some situations when the

seat position is recorded in a certain

range. For details, contact your

Toyota dealer.

dure

1 Carry only the key that has

been assigned and regis-

tered in My Settings, and

then unlock and open the

driver’s door using the smart

key system or wireless

remote control.

IJam protection function

While the driving position is recalled

or the power easy access system is

operating, if an object is stuck

behind the front seat, the front seat

will stop and then slightly move for-

ward. When the jam protection func-

tion operates, the seat stops at a

position other than the set seat posi-

tion. Check the seat position.

The driving position will move to the

recorded position.

If the driving position is in a position

that has already been recorded, the

seat will not move.

2 Turn the power switch to

ACC or ON.

The seat will move to the recorded

position.

 Memory recall function

cancelation procedure

How to cancel the memory call

193

4-6. Favorite settings

function varies depending on the

authentication device.

My Settings

For details, refer to the “MULTIME-

DIA OWNER’S MANUAL”.

Drivers are identified using

devices such as electronic

keys to store the driving

position and vehicle set-

tings for each. Then the

information can be recalled

the next time the vehicle is

driven.

IRecalling the driving position

using the memory recall func-

tion

GThe timing of operation may differ

depending on the device used to

identify an individual.

GAs a driving position can be regis-

tered to each electronic key, if 2 or

more keys are carried, the recall

driving position may different.

Authentication devices can

be assigned in advance to

drivers so that they can

drive using their preferred

settings.

4

Settings for 3 drivers can be

stored in My Settings.

For information on authenti-

cation devices registra-

tion/deletion, changing the

driver’s name, initializing

driver registered settings,

manually switching drivers

and deleting drivers regis-

tration, refer to the “MULTI-

MEDIA OWNER’S

MANUAL”.

Types of assigned

authentication devices

An individual can be identified

using the following authentica-

tion devices.

 Electronic key

An individual is identified when the

smart key system detects their

electronic key.

194

4-6. Favorite settings

When an individual is identified, the

vehicle settings used when the

power switch was last turned off are

recalled.

 Face identification

Individuals are identified by detect-

ing the face from the driver monitor.

 Bluetooth^®devices

 Safe driving support func-

tion^*2

An individual can be identified if the

®

same Bluetooth device that was

When an individual is identified, the

vehicle settings used when the

power switch was last turned off are

recalled.

used as a hands-free phone the

last time the vehicle was entered is

connected to the multimedia sys-

tem.

*1

:If equipped

For information on how to connect

*2

:Some settings are excluded

®

Bluetooth devices, refer to the

“MULTIMEDIA OWNER’S MAN-

UAL”.

If an individual is identified by

detecting an electronic key, identifi-

®

cation by Bluetooth device will not

be performed.

Recalled functions

When an individual is identified

from an authentication device,

settings for the following func-

tions are recalled.

 Driving position (memory

recall function)^*1

After an individual is identified, the

driving position that was set when

driving was last completed is

recalled when either of the follow-

ing operations is performed.

Identification using electronic key:

The driver’s door is unlocked and

opened using the smart key system

or wireless remote control.

 Vehicle settings that can be

set using the multimedia dis-

play^*2

Before driving -> Favorite settings for Your Toyota C-Hr SUV Second Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals