OPERATION OF INSTRUMENTS AND CONTROLS - Keys and Doors -> Hood for Your Toyota Prius 4 Door First Generation (1997-2003)

—Lock release lever  
cancelling system  
Hood  
—Internal trunk release handle  
After closing the trunk lid, insert the  
master key and turn it counterclockwise  
to deactivate the lock release lever.  
If a person is locked in the trunk, he  
or she can pull down the phosphores-  
cent handle on the inside of trunk lid  
in case of emergency to open the trunk  
lid.  
To open the hood:  
1. Pull the hood lock release lever. The  
hood will spring up slightly.  
After closing the trunk lid, try pulling it up  
to make sure it is securely locked.  
CAUTION  
The phosphorescent (glowinthedark)  
handle will continue to glow for a time  
after the trunk lid is closed. Exposing the  
handle to stronger light will cause it to  
glow longer.  
Before driving, be sure that the hood  
is closed and securely locked. Other-  
wise, the hood may open unexpected-  
ly while driving and an accident may  
occur.  
32  
NOTICE  
Be sure to return the support rod to  
its clip before closing the hood. Clos-  
ing the hood with the support rod  
inserted into the slot could cause the  
hood to bend.  
2. In front of the vehicle, pull up the  
auxiliary catch lever and lift the  
hood.  
3. Hold the hood open by inserting the  
support rod into the slot.  
Before closing the hood, check to see that  
you have not forgotten any tools, rags,  
etc. and return the support rod to its  
clip—this prevents rattles. Then lower the  
hood and make sure it locks into place.  
If necessary, press down gently on the  
front edge to lock it.  
CAUTION  
After inserting the support rod into  
the slot, make sure the rod supports  
the hood securely from falling down  
on to your head or body.  
33