Maintenance and care -> Positioning a floor jack for Your Toyota Prius 4 Door Third Generation (2010-2015)

4-3. Do-it-yourself m aintenanc e  
Positioning a floor jack  
When raising your vehicle with a floor jack, position the jack cor-  
rectly. Improper placement (such as under rear suspension etc.) may  
damage your vehicle or cause injury.  
Front  
Rear  
ITO43P106  
416  
4-3. Do-it-yourself maintenance  
CAUTION  
When raising your vehicle  
Make sure to observe the following precautions to reduce the possibility of  
death or serious injury:  
Lift up the vehicle using a floor jack  
such as the one shown in the illustra-  
tion.  
When using a floor jack, follow the instructions of the manual provided with  
the jack.  
Do not use the jack that was supplied with your vehicle.  
Do not put any part of your body underneath the vehicle when it is sup-  
4
ported only by the floor jack.  
Always use floor jack and/or automotive jack stands on a solid, flat, level  
surface.  
Do not start the hybrid system while the vehicle is supported by the floor  
jack.  
Stop the vehicle on level, firm ground, firmly set the parking brake and shift  
the shift position to P.  
Make sure to set the floor jack properly at the jack point.  
Raising the vehicle with an improperly positioned floor jack will damage  
the vehicle and may cause the vehicle to fall off the floor jack.  
417  
4-3. Do-it-yourself maintenance  
CAUTION  
Do not raise the vehicle while someone is in the vehicle.  
When raising the vehicle, do not place any object on top of or underneath  
the floor jack.  
When raising the vehicle, do not set the  
Rear suspension  
floor jack under the rear suspension.  
Front  
ITO43P206  
418