Climate control for Your Vauxhall Astra 4 Door Eight Generation (2022-2026)

Climate control  
113  
maximum cooling A/C Max  
fan speed C  
Climate control systems  
Electronic climate control  
system  
Climate control  
demisting and defrosting h  
heated rear window and exterior  
Climate control systems ............. 113  
Electronic climate control  
system .................................... 113  
Auxiliary heater ........................ 117  
Temperature preconditioning . . 117  
Air vents ..................................... 118  
Adjustable air vents ................. 118  
Fixed air vents ......................... 119  
Maintenance .............................. 119  
Air intake ................................. 119  
Air conditioning regular  
operation ................................ 120  
Service .................................... 120  
mirrors e  
manual air recirculation n  
Heated rear window e 3 27.  
Heated exterior mirrors e 3 24.  
Heated windscreen 9 3 28.  
Heated seats q 3 36.  
In automatic mode, temperature, fan  
speed and air distribution are  
regulated automatically.  
Activated functions are indicated in  
the status bar on the Info Display or  
with LEDs in the buttons.  
The electronic climate control system  
is only fully operational when the  
engine is running.  
Single-zone climate control.  
Dual-zone climate control.  
The dual zone climate control allows  
different temperatures for driver side  
and front passenger side.  
Controls for:  
temperature A  
cooling A/C  
automatic mode AUTO  
114  
Climate control  
panel or on the Info Display: soft,  
normal or fast. The selected  
setting is shown on the Info  
Display.  
Open all air vents to allow  
optimised air distribution in  
automatic mode.  
The button on the driver's side  
changes the temperature for the  
driver's side or for both sides  
depending on activation of  
synchronisation SYNC.  
Climate control settings menu  
Recommended temperature is 22 °C.  
If the minimum temperature is set, the  
climate control system runs at  
maximum cooling.  
If the maximum temperature is set,  
the climate control system runs at  
maximum heating.  
Air conditioning must be  
activated for optimal cooling and  
demisting. Press A/C to switch on  
air conditioning. Activation is  
indicated in the status bar on the  
Info Display or by the LED in the  
button.  
Notice  
Press ; to open the climate settings  
on the Info Display.  
Info Display 3 86.  
If A/C is switched on, reducing the  
set cabin temperature can cause the  
engine to restart from an Autostop or  
inhibit an Autostop.  
Temperature preselection  
Set the preselected temperature on  
the Info Display or by using A on the  
climate control panel. The  
Automatic mode AUTO  
Basic setting for maximum comfort:  
Stop-start system 3 126.  
Dual zone temperature  
synchronisation SYNC  
Touch SYNC in the climate control  
settings on the Info Display to  
activate / deactivate synchronisation  
of the passenger side temperature  
setting to the driver side temperature  
setting. Activation of synchronisation  
is indicated in the status bar on the  
Info Display.  
preselected temperature is indicated  
in the status bar on the Info Display.  
Preselect temperature.  
Dual zone climate control: Set the  
preselected temperatures separately  
for driver and front passenger to the  
desired value on the Info Display or  
by using the left and right buttons on  
the climate control panel. The button  
on the passenger side changes the  
temperature for the passenger side.  
Press AUTO, the air distribution  
and fan speed are regulated  
automatically.  
Three different pre-set fan  
speeds can be selected by  
repeatedly tapping on AUTO  
either on the climate control  
Climate control  
115  
The A/C Max function sets  
Air distribution  
Manual settings  
Climate control system settings can  
be changed by activating the  
following functions:  
temperature as low as possible and  
adjusts distribution to all air vents. In  
addition, it sets air flow to maximum  
and activates air recirculation.  
Press ; to open the climate settings  
on the Info Display.  
Select climate control options from  
the menu on the left side of the screen  
and set the desired air distribution  
along with fan speed and  
temperature.  
Settings are indicated in the status  
bar on the Info Display.  
Air conditioning A/C  
Notice  
If the climate control is set to  
maximum cooling while the ambient  
temperature is high, an Autostop  
may be inhibited until the required  
temperature in the passenger  
compartment has been reached.  
Press A/C to switch on cooling.  
Cooling is only functional when the  
engine is running and cooling fan is  
switched on. Activation is indicated in  
the status bar on the Info Display.  
To return to automatic air distribution,  
press AUTO.  
Press A/C again to switch off cooling.  
If the climate control is set to  
maximum cooling while the engine is  
in an Autostop, the engine may  
restart automatically.  
The air conditioning system cools and  
dehumidifies (dries) when outside  
temperature is above a specific level.  
Therefore, condensation may form  
and drip from under the vehicle.  
If no cooling or drying is required,  
switch off the cooling system for fuel  
saving reasons.  
Demisting and defrosting the  
windows h  
Press h. Activation is indicated  
Fan speed C  
Adjust the air flow by pushing C up  
or down to the desired speed.  
Set speed to the lowest level: fan and  
cooling are switched off.  
Fan speed is indicated in the status  
bar on the Info Display.  
in the status bar on the Info  
Display.  
Temperature and air distribution  
are set automatically and the fan  
runs at high speed.  
A/C Max  
Switch on air conditioning by  
Activate maximum cooling with one  
push of a button.  
pressing A/C, if required.  
Switch on heated rear window  
e.  
To return to automatic mode, press  
AUTO.  
116  
Climate control  
Switch on heated windscreen  
Activation by pressing AUTO,  
9 Warning  
9.  
switching on the fan or switching on  
any other climate control function.  
To return to previous mode,  
The exchange of fresh air is  
reduced in air recirculation mode.  
In operation without cooling, the  
air humidity increases, so the  
windows may mist up from inside.  
The quality of the passenger  
compartment air deteriorates,  
which may cause the occupants to  
feel drowsy.  
press h again. To return to  
Air quality  
automatic mode, press AUTO.  
The system combines a high  
efficiency interior air filter with an air  
quality sensor and a particle sensor in  
the control console.  
Heated rear window 3 27.  
Heated exterior mirrors 3 24.  
Heated windscreen 3 28.  
Notice  
If h is pressed while the engine is  
running, an Autostop will be inhibited  
until h is pressed again.  
In warm and very humid ambient air  
conditions, the windscreen may mist  
up from outside, when cold air is  
directed towards it. If windscreen  
mists up from outside, activate  
windscreen wiper and deactivate air  
flow to the front.  
If h is pressed while the engine is  
in an Autostop, the engine will restart  
automatically.  
Stop-start system 3 126.  
Manual air recirculation x  
Deactivation of electronic climate  
control system  
Press x to activate the air  
recirculation mode. Activation is  
Push down C subsequently or push  
down and hold C until the electronic  
climate control system is deactivated.  
Deactivation is also possible in the  
climate settings menu on the Info  
Display.  
Select Air Quality from the menu on  
the left side of the screen to show the  
air quality index and to activate /  
deactivate the function.  
indicated by the LED in the button.  
Press x again to deactivate  
recirculation mode.  
Climate control  
117  
Air quality index  
When the vehicle is plugged in,  
Auxiliary heater  
Air heater  
Quickheat is an electric auxiliary air  
heater which automatically warms up  
the passenger compartment more  
quickly.  
battery charging takes precedence  
over pre-conditioning.  
Using an exterior pollution sensor,  
this function automatically activates  
the air recirculation when a certain  
level of pollution in the exterior air is  
detected. When the air quality returns  
to a satisfactory level, air recirculation  
is automatically deactivated. Air  
recirculation is automatically  
Consequently, it can only be  
activated if the battery is charged  
above a threshold fixed at 80%.  
If a recurrent heating / ventilation is  
programmed and two heating /  
ventilation procedures are carried  
out without operating the vehicle, the  
programming is deactivated.  
activated when the windscreen  
washer is used or when reverse gear  
is engaged. The function is inactive if  
the outside temperature is below  
5° C to prevent the windscreen and  
side windows of misting up.  
Temperature  
preconditioning  
Temperature preconditioning allows  
to heat or to ventilate the vehicle's  
interior to reach an automatically pre-  
defined temperature. Days and times  
of temperature preconditioning can  
be programmed.  
Setting timer  
Notice  
Several timers can be programmed  
and saved. It is recommended to  
programme temperature  
preconditioning with the vehicle  
plugged in, in order to optimise the  
long-term perfomance of the high  
voltage battery.  
Clean air function  
The particle sensor in the control  
console monitors the interior air  
quality. Air recirculation is  
The temperature preconditioning can  
be programmed via the Info Display  
or the MyVauxhall App.  
automatically managed to enable the  
interior air being purified by filtering it  
through the high efficiency filter. If the  
air quality appears to be reduced  
permanently, contact a qualified  
workshop to change the high  
efficiency filter.  
Notice  
The temperature preconditioning is  
only activated if the ignition is off and  
the vehicle is locked.  
If the charging level of the high  
voltage battery is below 30%, the  
temperature preconditioning is not  
activated.  
118  
Climate control  
plugged in, or 20 minutes before the  
programmed time when it is not  
plugged in, and is maintained ten  
minutes after it.  
Air vents  
Adjustable air vents  
Centre air vents in the instrument  
panel  
Press ; to open climate settings on  
the Info Display.  
Select preconditioning settings from  
the menu on the left side of the  
screen.  
Select g to define a new timer or  
touch L next to a timer to edit it.  
The LED on = shows the operating  
status of the temperature  
preconditioning:  
Direct the flow of air by tilting and  
swivelling the slats.  
To close the vent, swivel the slats to  
the left.  
LED illuminates: A timer has  
Set time and days and confirm.  
Activate the timer.  
To delete a timer, select the desired  
timer and press Z at the lower left  
corner of the screen.  
The heating / ventilation procedure  
starts approx. 45 minutes before the  
programmed time when the vehicle is  
been set and activated.  
LED flashes: The system is  
operating.  
The LED extinguishes at the end of  
the heating / ventilation operation or  
when the temperature  
preconditioning is stopped using the  
remote control.  
Climate control  
119  
Outer air vents in the instrument  
panel  
Air vents for rear passenger  
Maintenance  
Air intake  
Direct the flow of air by tilting and  
swivelling the slats.  
Close the vent by turning the wheel.  
Direct the flow of air by tilting and  
swivelling the slats.  
To close the vent, swivel the slats to  
the left.  
At least two air vents must be open  
while cooling is on.  
The air intake in front of the  
windscreen in the engine  
compartment must be kept clear to  
allow air intake. Remove any leaves,  
dirt or snow.  
Fixed air vents  
Additional air vents are located  
beneath the windscreen and door  
windows and in the foot wells.  
9 Warning  
Do not attach any objects to the  
slats of the air vents. Risk of  
damage and injury in case of an  
accident.  
120  
Climate control  
Air conditioning regular  
operation  
In order to ensure continuously  
efficient performance, cooling must  
be operated for a few minutes once a  
month, irrespective of the weather  
and time of year. Operation with  
cooling is not possible when the  
outside temperature is too low.  
Service  
For optimal cooling performance, it is  
recommended to annually check the  
climate control system, starting  
three years after initial vehicle  
registration, including:  
functionality and pressure test  
heating functionality  
leakage check  
check of drive belts  
cleaning of condenser and  
evaporator drainage  
performance check