118
Climate control
plugged in, or 20 minutes before the
programmed time when it is not
plugged in, and is maintained ten
minutes after it.
Air vents
Adjustable air vents
Centre air vents in the instrument
panel
Press ; to open climate settings on
the Info Display.
Select preconditioning settings from
the menu on the left side of the
screen.
Select g to define a new timer or
touch L next to a timer to edit it.
The LED on = shows the operating
status of the temperature
preconditioning:
Direct the flow of air by tilting and
swivelling the slats.
To close the vent, swivel the slats to
the left.
●
LED illuminates: A timer has
Set time and days and confirm.
Activate the timer.
To delete a timer, select the desired
timer and press Z at the lower left
corner of the screen.
The heating / ventilation procedure
starts approx. 45 minutes before the
programmed time when the vehicle is
been set and activated.
●
LED flashes: The system is
operating.
The LED extinguishes at the end of
the heating / ventilation operation or
when the temperature
preconditioning is stopped using the
remote control.
English 