Climate control
115
The A/C Max function sets
Air distribution
Manual settings
Climate control system settings can
be changed by activating the
following functions:
temperature as low as possible and
adjusts distribution to all air vents. In
addition, it sets air flow to maximum
and activates air recirculation.
Press ; to open the climate settings
on the Info Display.
Select climate control options from
the menu on the left side of the screen
and set the desired air distribution
along with fan speed and
temperature.
Settings are indicated in the status
bar on the Info Display.
Air conditioning A/C
Notice
If the climate control is set to
maximum cooling while the ambient
temperature is high, an Autostop
may be inhibited until the required
temperature in the passenger
compartment has been reached.
Press A/C to switch on cooling.
Cooling is only functional when the
engine is running and cooling fan is
switched on. Activation is indicated in
the status bar on the Info Display.
To return to automatic air distribution,
press AUTO.
Press A/C again to switch off cooling.
If the climate control is set to
maximum cooling while the engine is
in an Autostop, the engine may
restart automatically.
The air conditioning system cools and
dehumidifies (dries) when outside
temperature is above a specific level.
Therefore, condensation may form
and drip from under the vehicle.
If no cooling or drying is required,
switch off the cooling system for fuel
saving reasons.
Demisting and defrosting the
windows h
●
Press h. Activation is indicated
Fan speed C
Adjust the air flow by pushing C up
or down to the desired speed.
Set speed to the lowest level: fan and
cooling are switched off.
Fan speed is indicated in the status
bar on the Info Display.
in the status bar on the Info
Display.
●
Temperature and air distribution
are set automatically and the fan
runs at high speed.
A/C Max
●
●
Switch on air conditioning by
Activate maximum cooling with one
push of a button.
pressing A/C, if required.
Switch on heated rear window
e.
To return to automatic mode, press
AUTO.