Seats, restraints -> Front seats for Your Vauxhall Astra 4 Door Eight Generation (2022-2026)

Seats, restraints  
31  
Head restraints on rear seats  
Front seats  
Seat position  
9 Warning  
Only drive with the seat correctly  
adjusted.  
9 Warning  
Never adjust seats while driving as  
they could move uncontrollably.  
Press the catch and move the head  
restraint upwards, downwards,  
forwards or backwards until the  
desired position is adjusted.  
Pull the head restraint upwards or  
press the catch to release and push  
the head restraint downwards.  
9 Danger  
Do not sit closer than 25 cm to the  
steering wheel, to permit safe  
airbag deployment.  
Removal  
Press catch, pull the respective head  
restraint upwards and remove.  
9 Warning  
Never store any objects under the  
seats.  
32  
Seats, restraints  
Adjust the head restraint so that  
its upper edge is at upper head  
level.  
Sit with shoulders as far back  
against the backrest as possible.  
Set the backrest rake so that it is  
possible to easily reach the  
Longitudinal adjustment  
steering wheel with arms slightly  
bent. Maintain contact between  
shoulders and the backrest when  
turning the steering wheel. Do  
not angle the backrest too far  
back. We recommend a  
Sit with buttocks as far back  
against the backrest as possible.  
Adjust the distance between the  
seat and the pedals so that legs  
are slightly angled when pressing  
the pedals. Slide the front  
passenger seat as far back as  
possible.  
Set seat height high enough to  
have a clear field of vision on all  
sides and of all display  
instruments. There should be at  
least one hand of clearance  
between head and the roof  
frame. Your thighs should rest  
lightly on the seat without  
pressing into it.  
maximum rake of approx. 25°.  
Pull handle, slide seat, release  
handle. Try to move the seat back and  
forth to ensure that the seat is locked  
in place.  
Adjust seat and steering wheel in  
a way that the wrist rests on top  
of the steering wheel while the  
arm is fully extended and  
shoulders are on the backrest.  
Adjust the lumbar support so that  
it supports the natural shape of  
the spine.  
Head restraint adjustment 3 30.  
Steering wheel adjustment 3 67.  
Manual seat adjustment  
Drive only with engaged seats and  
backrests.  
Seats, restraints  
33  
Backrest inclination  
Seat height  
Lumbar support  
Turn handwheel. Do not lean on  
backrest when adjusting.  
Lever pumping motion  
Adjust lumbar support using the  
four-way switch to suit personal  
requirements.  
Press and hold the front or rear of the  
switch to increase or decrease the  
lumbar support.  
up  
: seat higher  
down : seat lower  
Press and hold the top or bottom of  
the switch to raise or lower the lumbar  
support.  
34  
Seats, restraints  
Thigh support  
Backrest inclination  
Keep a close watch on the seats  
when adjusting them. Vehicle  
passengers should be informed  
accordingly.  
Longitudinal adjustment  
Pull the lever and slide the thigh  
support.  
Tilt switch forwards / backwards.  
Seat height and angle  
Power seat adjustment  
Move switch forwards / backwards.  
9 Warning  
Care must be taken when  
operating the power seats. There  
is a risk of injury, particularly for  
children. Objects could become  
trapped.  
Seats, restraints  
35  
Tilt the rear of the switch upwards /  
downwards to adjust the height.  
Thigh support  
Tilt the front of the switch upwards /  
downwards to adjust the angle.  
Lumbar support  
Storing memory position  
Adjust driver's seat and then  
Press and hold the front or rear of the  
button to raise or lower the thigh  
support.  
adjust exterior mirrors to desired  
positions.  
Press M and then press 1 or 2  
within four seconds.  
A chime sounds to confirm the  
storing.  
Memory function for power seat  
adjustment and exterior mirrors  
Two different driver's seat and  
exterior mirror settings can be stored.  
Adjust lumbar support using the  
four-way switch to suit personal  
requirements.  
Recall of memory positions  
Press 1 or 2 to recall the  
corresponding position.  
Press and hold the front or rear of the  
switch to increase or decrease the  
lumbar support.  
Press and hold the top or bottom of  
the switch to raise or lower the lumbar  
support.  
Vehicle personalisation 3 90.  
A chime sounds when recalling has  
been finished.