Get Instruments and controls Guide for Vauxhall Corsa 4 Door First Generation (2014-2019)

Instruments and controls

75

Control indicators ...................... 87

Turn signal ................................. 89

Seat belt reminder ..................... 90

Airbag and belt tensioners ......... 90

Airbag deactivation .................... 91

Charging system ....................... 91

Malfunction indicator light .......... 91

Service vehicle soon ................. 91

Brake and clutch system ........... 92

Operate pedal ............................ 92

Antilock brake system (ABS) ..... 92

Gear shifting .............................. 92

Power steering .......................... 92

Lane departure warning ............ 92

Ultrasonic parking assist ........... 93

Electronic Stability Control off ... 93

Electronic Stability Control and

Traction Control system ........... 93

Traction Control system off ....... 93

Preheating ................................. 93

Diesel particle filter .................... 93

Tyre pressure monitoring

system ...................................... 94

Engine oil pressure .................... 94

Low fuel ..................................... 94

Immobiliser ................................ 94

Reduced engine power ............. 94

Autostop .................................... 95

Exterior light .............................. 95

High beam ................................. 95

High beam assist ....................... 95

Fog light ..................................... 95

Rear fog light ............................. 95

Cruise control ............................ 95

Vehicle detected ahead ............. 95

Speed limiter ............................. 95

Traffic sign assistant .................. 95

Door open .................................. 95

Information displays ..................... 96

Driver Information Centre .......... 96

Colour-Info-Display .................. 100

Graphic-Info-Display ................ 101

Vehicle messages ...................... 102

Warning chimes ....................... 104

Battery voltage ........................ 104

Vehicle personalisation .............. 105

OnStar ....................................... 108

Instruments and

controls

Controls ....................................... 76

Steering wheel adjustment ........ 76

Steering wheel controls ............. 76

Heated steering wheel ............... 76

Horn ........................................... 77

Windscreen wiper/washer ......... 77

Rear window wiper/washer ....... 79

Outside temperature .................. 79

Clock ......................................... 80

Power outlets ............................. 82

Cigarette lighter ......................... 82

Ashtrays .................................... 83

Warning lights, gauges and indi‐

cators ........................................... 83

Instrument cluster ...................... 83

Speedometer ............................. 83

Odometer .................................. 83

Trip odometer ............................ 83

Tachometer ............................... 84

Fuel gauge ................................ 85

Fuel selector .............................. 85

Engine coolant temperature

gauge ....................................... 86

Service display .......................... 86

76

Instruments and controls

Steering wheel controls

Heated steering wheel

Controls

Steering wheel adjustment

Cruise control, Speed limiter,

Activate heating by pressing *.

Activation is indicated by the LED in

the button.

Forward collision alert setting,

Infotainment system and a connected

mobile phone can be operated via the

controls on the steering wheel.

Unlock lever, adjust steering wheel,

then engage lever and ensure it is

fully locked.

Do not adjust steering wheel unless

vehicle is stationary and steering

wheel lock has been released.

Driver assistance systems 3 153.

Further information is available in the

Infotainment manual.

Instruments and controls

77

The highlighted grip areas of the

steering wheel are heated quicker

and to a higher temperature than the

other areas.

Adjustable wiper interval

Windscreen wiper/washer

Windscreen wiper

Heating is operational when the

engine is running and during an

Autostop.

Stop-start system 3 135.

Horn

Wiper lever in position INT.

Turn the adjuster wheel to adjust the

HI : fast

desired wipe interval:

LO : slow

short interval

long interval

: turn adjuster

wheel upwards

: turn adjuster

wheel downwards

INT : interval wiping

or

automatic wiping with rain

sensor

OFF : off

Press j.

For a single wipe when the

windscreen wiper is off, press the

lever down to position 1x.

Do not use if the windscreen is frozen.

Switch off in car washes.

78

Instruments and controls

Automatic wiping with rain sensor

Adjustable sensitivity of the rain

sensor

Keep the sensor free from dust, dirt

and ice.

INT : automatic wiping with rain

sensor

Turn the adjuster wheel to adjust the

sensitivity:

Windscreen washer

The rain sensor detects the amount of

water on the windscreen and

automatically regulates the frequency

of the windscreen wiper.

If the wiper frequency is above

20 seconds, the wiper arm moves

slightly down to the park position.

low sensitivity : turn adjuster

wheel downwards

high sensitivity : turn adjuster

wheel upwards

Instruments and controls

79

Pull lever. Washer fluid is sprayed

onto the windscreen and the wiper

wipes a few times.

Outside temperature

A drop in temperature is indicated

immediately and a rise in temperature

after a time delay. Temperatures

below 3 °C flash on the display.

Washer fluid 3 193

Rear window wiper/washer

Push lever. Washer fluid is sprayed

onto the rear window and the wiper

wipes a few times.

Do not use if the rear window is

frozen.

Switch off in car washes.

Illustration shows Graphic-Info-

Display.

The rear window wiper comes on

automatically when the windscreen

wiper is switched on and reverse gear

is engaged.

Press the rocker switch to activate the

rear window wiper:

upper position : continuous

operation

Activation or deactivation of this

function can be changed in the menu

Settings in the Info-Display.

lower position : intermittent

operation

middle position : off

Washer fluid 3 193

Vehicle personalisation 3 105.

80

Instruments and controls

If outside temperature drops to 3 °C,

a warning message is displayed in the

Driver Information Centre.

Notice

For a detailed description of menu

operation, refer to the Infotainment

manual.

9 Warning

Set time

The road surface may already be

icy even though the display

indicates a few degrees above 0

°C.

Clock

Graphic-Info Display

Illustration shows Colour-Info-

Display.

Press the MENU-TUNE knob to enter

the Set time submenu.

Press CONFIG to open the Settings

menu.

Scroll through the list and select the

menu item Time Date to display the

respective submenu.

Uplevel display

Turn the MENU-TUNE knob to

change the current value of the first

setting.

Press the MENU-TUNE knob to

confirm the set value.

The cursor then switches to the next

value. If all values are set, you are

automatically returned to the next

higher menu level.

Instruments and controls

81

Set date

RDS clock synchronization

The RDS signal of most VHF

transmitters automatically sets the

time. RDS time synchronisation can

take a few minutes. Some

transmitters do not send a correct

time signal. In such cases, it is

recommended to switch off the

automatic time synchronisation.

To switch between the options On

and Off, repeatedly press the

MENU-TUNE knob.

Press the MENU-TUNE knob to enter

the Set date submenu.

Turn the MENU-TUNE knob to

change the current value of the first

setting.

Press the MENU-TUNE knob to

confirm the set value.

The cursor then switches to the next

value. If all values are set, you are

automatically returned to the next

higher menu level.

Notice

Colour-Info Display

Press ; and then select the

Settings screen button.

Select Time & date settings to display

the respective submenu.

For a detailed description of menu

operation, refer to the Infotainment

manual.

Set time format

To select the desired time format, tap

on the screen buttons 12 h or 24 h.

Set time format

Set date format

To switch between the available

options, repeatedly press the

MENU-TUNE knob.

To select the desired date format, tap

on the < and > screen buttons and

choose between the available

options.

Set date format

To switch between the available

options, repeatedly press the

MENU-TUNE knob.

82

Instruments and controls

Set time and date

Do not connect any current-delivering

accessories, e.g. electrical charging

devices or batteries.

Power outlets

Do not damage the outlet by using

unsuitable plugs.

Stop-start system 3 135.

Cigarette lighter

To adjust the time and date settings,

tap on the H and I screen buttons.

A 12 Volt power outlet is located in the

centre console.

Do not exceed the maximum power

RDS clock synchronization

consumption of 120 watts.

The RDS signal of most VHF

transmitters automatically sets the

time. RDS time synchronisation can

take a few minutes. Some

With ignition off, the power outlet is

deactivated. Additionally, the power

outlet is deactivated in the event of

low vehicle battery voltage.

Electrical accessories that are

connected must comply with the

electromagnetic compatibility

requirements laid down in

DIN VDE 40 839.

transmitters do not send a correct

time signal. In such cases, it is

recommended to switch off the

automatic time synchronisation.

To activate or deactivate RDS clock

synchronization, tap on the screen

buttons On or Off.

The cigarette lighter is located in the

centre console.

Press in cigarette lighter. It switches

off automatically once the element is

glowing. Pull out lighter.

Instruments and controls

Odometer

83

Ashtrays

Warning lights, gauges

and indicators

Caution

Instrument cluster

To be used only for ash and not for

combustible rubbish.

The needles of the instruments briefly

rotate to the end position when the

ignition is switched on.

Speedometer

The bottom line displays the recorded

distance in miles.

Trip odometer

The recorded distance is displayed

since the last reset.

Trip odometer counts up to

9999 miles and then restarts at 0.

The portable ashtray can be placed in

the cupholders.

Indicates vehicle speed.

84

Instruments and controls

Midlevel display

Uplevel display

Tachometer

To reset, press SET/CLR on the turn

signal lever for a few seconds

3 96.

Two trip odometers are selectable for

different trips.

Displays the engine speed.

Drive in a low engine speed range for

each gear as much as possible.

Select menu Trip/Fuel Information

Menu ; by pressing Menu on the

turn signal lever. Turn adjuster wheel

on turn signal lever and select Trip 1

or Trip 2. Each trip odometer can be

reset separately by pressing

SET/CLR on the turn signal lever for

a few seconds on the respective

menu.

Caution

If the needle is in the red warning

zone, the maximum permitted

engine speed is exceeded. Engine

at risk.

Instruments and controls

85

During liquid gas operation, the

system automatically switches over to

petrol operation when gas tanks are

empty 3 85.

LED off : petrol operation

Fuel gauge

LED

: checking conditions for

flashes

fuel transition to liquid

gas operation.

Illuminates if conditions

are fulfilled.

Never run the fuel tank dry.

Because of the fuel remaining in the

tank, the top-up quantity may be less

than the specified tank capacity.

LED illu‐ : liquid gas operation

minates

LED

: liquid gas tank is empty

or failure in liquid gas

system. A message is

displayed in the Driver

Information Centre.

flashes

five

Fuel selector

times

and

extin‐

guishes

Number of LEDs displays the level in

the fuel tank.

As soon as the liquid gas tank is

empty, petrol operation is

automatically engaged until the

ignition is switched off.

8

: fuel tank is full.

LEDs

The arrow indicates the

vehicle side where the fuel

filler flap is located.

Fuel for liquid gas operation 3 176.

During liquid gas operation, the level

in the gas tank is displayed.

Control indicator Y illuminates if the

level in the tank is low. Refuel

immediately if it flashes.

Press LPG to switch between petrol

and liquid gas operation. The LED in

the button shows the current

operating mode.

86

Instruments and controls

Engine coolant temperature

gauge

Caution

If engine coolant temperature is

too high, stop vehicle, switch off

engine. Danger to engine. Check

coolant level.

Service display

The engine oil life system lets you

know when to change the engine oil

and filter. Based on driving

conditions, the interval at which an

engine oil and filter change will be

indicated can vary considerably.

To display the remaining engine oil

life duration use turn signal lever

buttons:

Press MENU to select the Vehicle

Information Menu ?.

Turn the adjuster wheel to select

Remaining Oil Life.

Number of LEDs displays the coolant

temperature.

up to 3 LEDs

: engine operating

temperature not

yet reached

4 to 6 LEDs

: normal operating

temperature

more than 6

LEDs

: temperature too

high

Instruments and controls

87

The remaining engine oil life duration

is displayed in percent in the Driver

Information Centre.

Control indicators

The control indicators described are

not present in all vehicles. The

description applies to all instrument

versions.

Reset

Press SET/CLR on turn signal lever

for several seconds to reset. The

remaining engine oil life duration

menu must be active. Switch on

ignition, but not the engine.

The system must be reset every time

the engine oil is changed to ensure

proper functionality. Seek the

assistance of a workshop.

Depending on the equipment, the

position of the control indicators may

vary. When the ignition is switched

on, most control indicators will

illuminate briefly as a functionality

test.

The control indicator colours mean:

red

: danger, important reminder

yellow : warning, information, fault

green : confirmation of activation

blue : confirmation of activation

white : confirmation of activation

Next service

When the system has calculated that

engine oil life has diminished, a

warning message appears in the

Driver Information Centre. Have

engine oil and filter changed by a

workshop within one week or

300 miles (whichever occurs first).

Driver Information Centre 3 96.

Service information 3 234.

88

Instruments and controls

Control indicators in the instrument cluster

Instruments and controls

89

Control indicators in the centre

console

R

Brake and clutch system

Y

Low fuel 3 94

3 92

d

#

D

8

C

l

>

r

m

Immobiliser 3 94

-

Operate pedal 3 92

Reduced engine power 3 94

Autostop 3 95

u

Antilock brake system (ABS)

3 92

Exterior light 3 95

High beam 3 95

R

Gear shifting 3 92

c

)

Power steering 3 92

High beam assist 3 95

Fog light 3 95

Lane departure warning 3 92

Ultrasonic parking assist

3 93

r

Rear fog light 3 95

Cruise control 3 95

Vehicle detected ahead 3 95

Speed limiter 3 95

Traffic sign assistant 3 95

Door open 3 95

n

Electronic Stability Control off

3 93

Overview

A

L

b

k

Electronic Stability Control and

Traction Control system 3 93

O

X

Turn signal 3 89

Seat belt reminder 3 90

L

Traction Control system off

3 93

v

Airbag and belt tensioners

3 90

h

!

%

w

Preheating 3 93

V

p

Z

Airbag deactivation 3 91

Charging system 3 91

Diesel particle filter 3 93

Turn signal

O illuminates or flashes green.

Tyre pressure monitoring

system 3 94

Malfunction indicator light

3 91

Illuminates briefly

The parking lights are switched on.

I

Engine oil pressure 3 94

g

Service vehicle soon 3 91

90

Instruments and controls

X in the Driver Information Centre

k for front passenger seat illuminates

or flashes red in the centre console

when the seat is occupied.

Flashes

A turn signal or the hazard warning

flashers are activated.

Rapid flashing: failure of a turn signal

light or associated fuse.

Bulb replacement 3 196, Fuses

3 204.

Turn signals 3 117.

flashes or illuminates.

Illuminates

After having started the engine for a

minimum of 35 seconds, until the seat

belt has been fastened.

After the ignition has been switched

on, until the seat belt has been

fastened.

Also illuminates if an unfastened seat

belt is fastened whilst driving.

Flashes

After having started the engine for a

maximum of 100 seconds, until the

seat belt has been fastened.

Flashes

After starting-off, when the seat belt is

Seat belt reminder

Seat belt reminder on front seats

X for driver's seat illuminates or

flashes red in the tachometer.

unfastened.

Fastening the seat belt 3 41.

Seat belt status on rear seats

Airbag and belt tensioners

v illuminates red.

When the ignition is switched on, the

control indicator illuminates for

approx. four seconds. If it does not

illuminate, does not go out after

four seconds or illuminates whilst

driving, there is a fault in the airbag

system. Seek the assistance of a

workshop. The airbags and belt

pretensioners may fail to trigger in the

event of an accident.

Instruments and controls

91

Deployment of the belt pretensioners

or airbags is indicated by continuous

illumination of v.

Illuminates when the ignition is

9 Danger

switched on and extinguishes shortly

after the engine starts.

Risk of fatal injury for a child using

a child restraint system together

with activated front passenger

airbag.

Risk of fatal injury for an adult

person with deactivated front

passenger airbag.

Illuminates when the engine is

running

Fault in the emission control system.

The permitted emission limits may be

exceeded. Seek the assistance of a

workshop immediately.

9 Warning

Have the cause of the fault

remedied immediately by a

workshop.

Belt pretensioners, airbag system

3 40, 3 43.

Charging system

p illuminates red.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

Flashes when the engine is

running

Fault that could lead to catalytic

converter damage. Ease up on the

accelerator until the flashing stops.

Seek the assistance of a workshop

immediately.

Airbag deactivation

V illuminates yellow.

Illuminates for approx. 60 seconds

after the ignition is switched on. The

front passenger airbag is activated.

* illuminates yellow.

The front passenger airbag is

deactivated 3 48.

Illuminates when the engine is

running

Stop, switch off engine. Vehicle

battery is not charging. Engine

cooling may be interrupted. The

brake servo unit may cease to be

effective. Seek the assistance of a

workshop.

Service vehicle soon

g illuminates yellow.

Additionally, a warning message is

displayed in the Driver Information

Centre.

The vehicle requires a service.

Seek the assistance of a workshop.

Vehicle messages 3 102.

Malfunction indicator light

Z illuminates or flashes yellow.

92

Instruments and controls

On some versions, the operate pedal

message is indicated in the Driver

Information Display 3 102.

Brake and clutch system

Power steering

R illuminates red.

c illuminates yellow.

The brake and clutch fluid level is too

low, when manual parking brake is

not applied 3 193.

Illuminates with power steering

disabled

Failure in the power steering system.

Consult a workshop.

Antilock brake system

(ABS)

u illuminates yellow.

9 Warning

Illuminates for a few seconds after the

ignition is switched on. The system is

ready for operation when the control

indicator extinguishes.

If the control indicator does not go out

after a few seconds, or if it illuminates

while driving, there is a fault in the

ABS. The brake system remains

operational but without ABS

regulation.

Illumination of c and b

Stop. Do not continue your

journey. Consult a workshop.

simultaneously

Power steering system must be

calibrated, system calibration 3 152.

Illuminates when the manual parking

brake is applied and ignition is

switched on 3 149.

Lane departure warning

) illuminates green or flashes yellow.

Operate pedal

- illuminates or flashes yellow.

Illuminates green

System is switched on and ready to

operate.

Antilock brake system 3 148.

Illuminates

Clutch pedal must be depressed to

start the engine in Autostop mode.

Stop-start system 3 135.

Gear shifting

Flashes yellow

System recognises an unintended

lane change.

R with the number of the next higher

gear is indicated, when upshifting is

recommended for fuel saving

reasons.

Flashes

Lane departure warning 3 175.

Clutch pedal must to be depressed for

a main start of the engine 3 17,

3 134.

Instruments and controls

93

Preheating of diesel engine is

activated. Only activates when

outside temperature is low.

Flashes

Ultrasonic parking assist

r illuminates yellow.

Fault in system

The system is actively engaged.

Engine output may be reduced and

the vehicle may be braked

or

Diesel particle filter

automatically to a small degree.

Fault due to sensors that are dirty or

covered by ice or snow

or

Interference due to external sources

of ultrasound. Once the source of

interference is removed, the system

will operate normally.

Have the cause of the fault in the

system remedied by a workshop.

% illuminates or flashes yellow.

Illuminates

The diesel particle filter requires

cleaning.

Continue driving until %

extinguishes. If possible, do not allow

engine speed to drop below

2000 rpm.

A fault in the system is present. A

warning message or warning code

appears in the Driver Information

Centre. Continued driving is possible.

The system is not operational. Driving

stability, however, may deteriorate

depending on road surface

conditions.

Have the cause of the fault remedied

by a workshop.

Illuminates

The diesel particle filter is full. Start

cleaning process as soon as

possible.

Ultrasonic parking assist 3 159.

Electronic Stability Control

off

Electronic Stability Control 3 151,

Traction Control system 3 150.

Flashes

t illuminates yellow.

The system is deactivated.

The maximum filling level of the filter

is reached. Start cleaning process

immediately to avoid damage to the

engine.

Diesel particle filter 3 139, Stop-start

system 3 135.

Traction Control system off

k illuminates yellow.

The system is deactivated.

Electronic Stability Control

and Traction Control system

b flashes or illuminates yellow.

Preheating

! illuminates yellow.

94

Instruments and controls

Check oil level before seeking the

Illuminates when the engine is

running

Tyre pressure monitoring

system

assistance of a workshop 3 190.

w illuminates or flashes yellow.

Caution

Low fuel

Y illuminates or flashes yellow.

Illuminates

Tyre pressure loss. Stop immediately

and check tyre pressure.

Engine lubrication may be

interrupted. This may result in

damage to the engine and/or

locking of the drive wheels.

Illuminates

Level in fuel tank is too low.

Flashes

Fuel used up. Refuel immediately.

Never run the fuel tank dry.

Refuelling 3 178.

Catalytic converter 3 140.

1. Depress the clutch.

2. Set selector lever to neutral.

3. Move out of the flow of traffic as

quickly as possible without

impeding other vehicles.

Fault in system or tyre without

pressure sensor mounted (e.g. spare

wheel). After 60-90 seconds the

control indicator illuminates

continuously. Consult a workshop.

Tyre pressure monitoring system

3 212.

4. Switch off the ignition.

Bleeding the diesel fuel system

3 195.

9 Warning

Engine oil pressure

I illuminates red.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

Immobiliser

When the engine is off,

considerably more force is needed

to brake and steer.

During an Autostop, the brake

servo unit will still be operational.

d flashes yellow.

Fault in the immobiliser system. The

engine cannot be started.

Do not remove key until vehicle is

stationary, otherwise the steering

wheel lock could engage

unexpectedly.

Reduced engine power

# illuminates yellow.

Instruments and controls

Speed limiter

95

The engine power is limited. Consult

a workshop.

Fog light

> illuminates green.

The front fog lights are on 3 117.

L illuminates in the Driver

Information Centre when Speed

Autostop

Autostop active

D illuminates red or white.

Engine is in an Autostop.

Stop-start system 3 135.

limiter is active. Set speed is indicated

alongside L symbol.

Rear fog light

r illuminates yellow.

The rear fog light is on 3 117.

Speed limiter 3 155.

Traffic sign assistant

L displays detected traffic signs as a

Cruise control

control indicator.

m illuminates white or green.

Exterior light

8 illuminates green.

The exterior lights are on 3 112.

Traffic sign assistant 3 171.

Illuminates white

The system is on.

Door open

h illuminates.

Illuminates green

Cruise control is active.

High beam

C illuminates blue.

A door or the tailgate is open.

Illuminated when high beam is on or

during headlight flash 3 114.

Cruise control 3 153.

Vehicle detected ahead

High beam assist

A illuminates green.

l illuminates green.

A vehicle ahead is detected in the

same lane.

Forward collision alert 3 156.

The high beam assist is activated

3 115.

96

Instruments and controls

●

Autostop indication 3 135

service information 3 91

Uplevel display

Information displays

Driver Information Centre

Midlevel display

The Driver Information Centre is

located in the instrument cluster.

Depending on the version and

equipment, the Driver Information

Centre is available as Midlevel

display or Uplevel display.

The following menus are selectable in

the Driver Information Centre using

the buttons on the turn signal lever:

●

vehicle information and settings

trip/fuel information

economic information

Main menus are:

●

trip/fuel information, displayed

by ;, see description below

Main menus are:

The following indications appear

when appropriate:

●

vehicle information, displayed

by ?, see description below

eco information, displayed by

@, see description below

●

trip/fuel information, see

description below

warning messages 3 102

gear shift indication 3 92

drive mode indication 3 140,

3 145

tyre pressure warning 3 212

seat belt reminder indication

3 90

●

vehicle information, see

description below

Some of the displayed functions differ

when the vehicle is being driven or at

a standstill. Some functions are only

available when the vehicle is being

driven.

Some of the displayed functions differ

when the vehicle is being driven or at

a standstill. Some functions are only

available when the vehicle is being

driven.

●

Instruments and controls

97

Vehicle and service messages are

popped-up in the Driver Information

Centre if required. Confirm messages

by pressing SET/CLR. Vehicle

messages 3 102.

Trip odometer

Selecting menus and functions

The menus and functions can be

selected via the buttons on the turn

signal lever.

Trip odometer displays the current

distance since a certain reset.

Trip odometer counts up to

9999 miles and then restarts at 0.

Turn the adjuster wheel to select

between trip odometer 1 and 2 for

Uplevel display.

To reset, press SET/CLR for a few

seconds while viewing this page.

The information of trip page 1 and 2

can be reset separately while the

respective display is active.

Trip/Fuel information

Possible pages are:

●

digital vehicle speed

trip odometer

average fuel economy

average vehicle speed

instantaneous fuel economy

fuel range

fuel range LPG version

timer

outside temperature

Average fuel economy

Display of average consumption. The

measurement can be reset at any

time and starts with a default value.

Press MENU to switch between the

main menus or to return from a

submenu to the next higher menu

level.

Turn the adjuster wheel to select a

submenu of the main menu or to set

a numeric value.

To reset, press SET/CLR for a few

seconds while viewing this page.

Selection and indication is different

between Midlevel display and Uplevel

display.

The information of trip page 1 and 2

can be reset separately while the

respective display is active.

On vehicles with LPG engines:

Average consumption is indicated for

the currently selected mode, LPG or

petrol.

Digital vehicle speed

Digital display of the instantaneous

speed.

Press SET/CLR to select and confirm

a function.

98

Instruments and controls

Average vehicle speed

Display of average speed. The

measurement can be reset at any

time.

To reset, press SET/CLR for a few

seconds while viewing this page.

The information of trip page 1 and 2

can be reset separately while the

respective display is active.

When the tank must be refuelled

immediately, a warning message

appears and remains on the display.

Additionally, control indicator Y

flashes in the fuel gauge 3 94.

Outside temperature

Display of current outside

temperature.

Vehicle information

Possible pages are:

Fuel range, LPG version

●

unit

speed warning

remaining engine oil life

indication

Instantaneous fuel economy

Display of the instantaneous

consumption.

On vehicles with LPG engines:

Instantaneous consumption is

indicated for the currently selected

mode, LPG or petrol.

●

tyre pressure

tyre loading

outside temperature

following distance

traffic sign assistant

language

Fuel range

Selection and indication is different

between Midlevel display and Uplevel

display.

Range is calculated from current fuel

tank level and current consumption.

The display shows average values.

Display of the approximate total fuel

range for each fuel tank (LPG and

petrol). A low fuel level in either tank

is indicated by Low in the respective

section.

After refuelling, the range is updated

automatically after a brief delay.

When the fuel level in the tank is low,

a message appears on the display

and control indicator Y in the fuel

gauge illuminates.

Unit

Press SET/CLR while page is

displayed. Select imperial (unit 1) or

metric (unit 3) by turning the adjuster

wheel. Press SET/CLR to set the unit

of measurement.

Timer

To operate follow the instructions on

the display.

Instruments and controls

99

Speed warning

Remaining oil life

Language

Indicates an estimate of the oil's

useful life. The number in percentage

means the current remaining oil life

and indicates when to change the

engine oil and filter 3 86.

Select preferred country language as

the display language.

ECO information

Possible pages are:

●

economy trend

economy index

top consumers

Tyre pressure

Tyre pressures of all wheels are

displayed on this page during driving

3 212.

Economy trend

Tyre load

The tyre pressure category according

to the actual tyre inflation pressure

can be selected 3 212.

The speed warning function alerts the

driver when a set speed is exceeded.

To set the speed warning, press

SET/CLR while the page is displayed.

Turn the adjuster wheel to select the

value. Press SET/CLR to set the

speed.

Outside temperature

Display of current outside

temperature.

Following distance

Displays the distance in seconds to a

preceding moving vehicle 3 158.

If the selected speed limit is

exceeded, a warning chime sounds.

Once the speed is set, this feature

can be turned off by pressing

Traffic sign assistant

Displays the detected traffic signs for

the current route section 3 171.

Displays the average consumption

development over a distance of

31 miles. Filled segments display the

consumption in 3.1 mile steps and

SET/CLR while viewing this page.

100

Instruments and controls

shows the effect of topography or

driving behaviour on fuel

consumption.

Graph can be reset by pressing

SET/CLR.

The type of information and how it is

displayed depends on the settings

made.

Colour-Info-Display

Depending on the vehicle

configuration, the vehicle has a

Colour-Info-Display with touch screen

functionality.

Selecting menus and settings

Menus and settings are selected via

the touch screen display.

The Colour-Info-Display with touch

screen functionality indicates in

colour:

Economy index

The current fuel consumption is

indicated on an economic scale. For

economical driving, adapt driving

style to keep the filled segments

within the Eco area. The more

segments are filled, the higher the

fuel consumption.

●

time 3 80

outside temperature 3 79

date 3 80

rear view camera indication

3 170

Simultaneously, the average

consumption value is indicated.

●

parking assist and advanced

parking assist instructions

3 159

Top consumers

List of top comfort consumers

currently switched on is displayed in

descending order. Fuel saving

potential is indicated.

●

electronic climate control settings

3 125

Press X to switch on the display.

Press ; to display the homepage.

Tap required menu display icon with

the finger.

Tap a respective icon to confirm a

selection.

Tap 9 to return to the next higher

menu level.

Infotainment system, see

description in the Infotainment

manual

During sporadic driving conditions,

the engine will activate the heated

rear window automatically to increase

the engine load. In this event, the

heated rear window is indicated as

one of the top consumers, without

activation by the driver.

●

system messages

vehicle messages 3 102

settings for vehicle

personalisation 3 105

Instruments and controls

101

Press ; to return to the homepage.

For further information, see

Infotainment manual.

●

electronic climate control settings

Press BACK to exit a menu or setting

without changing or delete the last

character in a character sequence.

Press the button for a few seconds to

delete the entire entry.

To exit the Settings menu, press

BACK in steps or press CONFIG after

confirming the changes.

3 125

Infotainment system, see

description in the Infotainment

manual

settings for vehicle

personalisation 3 105

Vehicle personalisation 3 105.

●

Graphic-Info-Display

Depending on the vehicle

configuration, the vehicle has a

Graphic-Info-Display.

Selecting menus and settings

Menus and settings are accessed via

the display.

Vehicle personalisation 3 105.

Memorised settings 3 22.

Press CONFIG: Menu page Settings

is displayed.

Turn knob MENU-TUNE to select a

setting or value.

Press knob MENU-TUNE to confirm

a setting or value.

The Graphic-Info-Display indicates:

●

time 3 80

outside temperature 3 79

date 3 80

102

Instruments and controls

Vehicle messages on Midlevel

display

No. Vehicle message

Vehicle messages

Messages are indicated mainly in the

Driver Information Centre, in some

cases together with a warning and

signal buzzer.

9

Turn steering wheel, start

engine again

12 Vehicle overloaded

13 Compressor overheated

15 Centre high-mounted brake

light failure

16 Brake light failure

17 Headlight levelling malfunction

18 Left low beam failure

19 Rear fog light failure

The vehicle messages are displayed

as code numbers.

20 Right low beam failure

21 Left sidelight failure

No. Vehicle message

1

3

4

5

7

Change engine oil

Press SET/CLR, MENU or turn the

adjuster wheel to confirm a message.

22 Right sidelight failure

23 Reversing light failure

24 Number plate light failure

25 Left front turn signal failure

26 Left rear turn signal failure

27 Right front turn signal failure

Engine coolant level low

Air conditioning off

Steering wheel is locked

Turn steering wheel, switch

ignition off and then on

Instruments and controls

103

No. Vehicle message

94 Shift to park before exiting

95 Service airbag

28 Right rear turn signal failure

29 Check trailer brake light

30 Check trailer reversing light

31 Check left trailer turn signal

32 Check right trailer turn signal

33 Check trailer rear fog light

34 Check trailer rear light

57 Tyre pressure imbalance on

rear axle

58 Tyres without TPMS sensors

detected

128 Bonnet open

134 Parking assist fault, clean

bumper

59 Open then close driver window

60 Open then close front

passenger window

136 Service parking assist

145 Check washer fluid level

174 Low vehicle battery

151 Press clutch to start

258 Parking assist off

65 Theft attempted

66 Service anti-theft alarm system

67 Service steering wheel lock

68 Service power steering

75 Service air conditioning

35 Replace battery in radio remote

control

48 Clean side blind spot alert

system

Vehicle messages on Uplevel-

Display

The vehicle messages are displayed

as text. Follow the instructions given

in the messages.

49 Lane departure warning

unavailable

76 Service side blind spot alert

system

53 Tighten fuel filler cap

79 Top up engine oil

54 Water in diesel fuel filter

81 Service transmission

82 Change engine oil soon

84 Engine power reduced

89 Service vehicle soon

The system displays messages

regarding the following topics:

55 Diesel particle filter is full

3 139

●

service messages

fluid levels

anti-theft alarm system

56 Tyre pressure imbalance on

front axle

104

Instruments and controls

●

brakes

ride control systems

●

If the parking assist detects an

object.

If unintended lane change

occurs.

If the reverse gear is engaged

and the rear end carrier

extended.

If the diesel particle filter has

reached the maximum filling

level.

Vehicle messages on

Colour-Info-Display

Some important messages appear

additionally in the

Colour-Info-Display. Some

messages only pop-up for a few

seconds.

cruise control, speed limiter

forward collision alert

parking assist systems

lighting, bulb replacement

wiper/washer system

doors, windows

side blind spot alert

traffic sign assistant

lane departure warning

radio remote control

seat belts

airbag systems

engine and transmission

tyre pressure

diesel particle filter

vehicle battery status

●

Warning chimes

When starting the engine or whilst

driving

Only one warning chime will sound at

a time.

The warning chime regarding

unfastened seat belts has priority

over any other warning chime.

When the vehicle is parked and/or

the driver's door is opened

●

With exterior lights on.

During an Autostop

●

If the driver's door is opened.

●

If seat belt is not fastened.

If a door or the tailgate is not fully

closed when starting off.

Battery voltage

Uplevel display

When the vehicle battery voltage is

running low, a warning message will

appear in the Driver Information

Centre.

●

If a certain speed is exceeded

with parking brake applied.

If a programmed speed is

exceeded.

If a warning message appears in

the Driver Information Centre or

Info-Display.

Midlevel display

Instruments and controls

105

When the vehicle battery voltage is

running low, a warning code 174 will

appear in the Driver Information

Centre.

1. Switch off immediately any

electrical consumers which are

not required for a safe drive, e.g.

seat heating, heated windscreen

and heated rear window or other

main consumers.

2. Charge the vehicle battery by

driving continuously for a while or

by using a charging device.

The warning message or warning

code will disappear after the engine

has been started twice consecutively

without a voltage drop.

Vehicle personalisation

The vehicle's behaviour can be

personalised by changing the settings

in the Info-Display.

Some of the personal settings for

different drivers can be memorised

individually for each vehicle key.

Memorised settings 3 22.

Depending on vehicle equipment and

country-specific regulations, some of

the functions described below might

not be available.

Select Settingsand then Vehicle

settings.

Some functions are only displayed or

active when the engine is running.

Personal settings

Graphic-Info-Display

Press CONFIG for the Settings menu.

If the vehicle battery cannot be

recharged, have the cause of the fault

remedied by a workshop.

Turn the MENU-TUNE control to

move to the desired setup menu, and

then press MENU-TUNE.

Vehicle settings

●

Climate and air quality

Auto fan speed: Modifies the

level of the cabin airflow of the

climate control in Automatic

mode.

106

Instruments and controls

Auto rear demist: Activates

Duration upon exit of vehicle:

the driver's door or the whole

vehicle whilst unlocking.

Auto relock doors: Activates or

deactivates the automatic relock

function after unlocking without

opening the vehicle.

Restore factory settings:

Resets all settings to the default

settings.

automatically the heated rear

Activates or deactivates and

changes the duration of exit

lighting.

window.

Comfort settings

Chime volume: Changes the

volume of warning chimes.

Personalization by driver:

Activates or deactivates the

personalisation function.

●

Power door locks

Auto door lock: Activates or

deactivates the automatic door

locking function after switching

on ignition.

●

Rear auto wipe in reverse:

Stop door lock if door open:

Activates or deactivates the door

locking function while a door is

open.

Delayed door lock: Activates or

deactivates the delayed door

locking function. This menu

option is displayed with Stop door

lock if door open deactivated.

Central locking system 3 22.

Remote locking, unlocking,

starting

Remote unlock feedback:

Activates or deactivates the

hazard warning flasher feedback

whilst unlocking.

Passive door unlock: Changes

the configuration to unlock only

Personal settings

Colour-Info-Display

When audio is switched on, press ;

on the control panel.

Activates or deactivates

automatic switching on of the

rear window wiper when reverse

gear is engaged.

●

Park assist / Collision detection

Park assist: Activates or

deactivates the ultrasonic

parking assist. Activation is

selectable with or without

attached trailer coupling.

Side blind zone alert: Changes

the settings for the side blind spot

alert system.

Exterior ambient lighting

Exterior lighting by unlocking:

Activates or deactivates the entry

lighting.

●

Instruments and controls

107

Select Settingsand then Vehicle

settings.

Auto Rear Defog: Automatically

activates heated rear window.

Collision / Detection Systems

Park Assist: Activates or

deactivates the ultrasonic

parking assist. Activation is

selectable with or without

attached trailer coupling.

Side Blind Zone Alert: Activates

or deactivates side blind zone

alert.

Exit Lighting: Activates or

deactivates and changes the

duration of exit lighting.

Power Door Locks

●

Unlocked Door Anti Lock Out:

Activates or deactivates the door

locking function while a door is

open.

Auto Door Lock: Activates or

deactivates the automatic door

locking function after switching

on ignition.

Comfort and Convenience

Auto Door Unlock: Changes the

configuration to unlock only the

driver's door or the whole vehicle

after switching off ignition.

Delayed Door Lock: Activates or

deactivates the delayed door

locking function. This feature

delays the actual locking of the

doors until all doors are closed.

Chime Volume: Changes the

volume of warning chimes.

Vehicle settings

Personalization By Driver:

Activates or deactivates the

personalisation function.

Auto Wipe in Reverse Gear:

Activates or deactivates

automatic switching on of the

rear window wiper when reverse

gear is engaged.

●

Climate & air quality

Auto Fan Max Speed: Modifies

the level of the cabin airflow of the

climate control in automatic

mode.

Air Conditioning Mode: Controls

the state of the cooling

compressor when the vehicle is

started. Last setting

(recommended) or at vehicle

start is either always on or always

off.

●

Remote Lock, Unlock, Start

Remote Unlock Light Feedback:

Activates or deactivates the

hazard warning flasher feedback

whilst unlocking.

Remote Door Unlock: Changes

the configuration to unlock only

●

Lighting

Vehicle Locator Lights: Activates

or deactivates the entry lighting.

108

Instruments and controls

the driver's door or the whole

vehicle whilst unlocking.

Relock Remotely Unlocked

Doors: Activates or deactivates

the automatic relock function

after unlocking without opening

the vehicle.

●

Smartphone application

OnStar

Remote control, e.g. location of

the vehicle, activation of horn and

lights, control of central locking

system

Stolen vehicle assistance

Vehicle diagnostics

OnStar is a personal connectivity and

service assistant with integrated

Wi-Fi hotspot. The OnStar service is

available 24 hours a day, seven days

a week.

●

Notice

Destination download

OnStar is not available for all

markets. For further information,

contact your workshop.

Notice

The OnStar module of the vehicle is

deactivated after ten days without an

ignition cycle. Functions requiring a

data connection will be available

again after switching on the ignition.

Notice

In order to be available and

operational, OnStar needs a valid

OnStar subscription, functioning

vehicle electrics, mobile service and

GPS satellite link.

OnStar buttons

To activate the OnStar services and

set up an account, press Z and speak

with an advisor.

Depending on the equipment of the

vehicle, the following services are

available:

●

Emergency services and support

in the case of a vehicle

breakdown

●

Wi-Fi hotspot

Instruments and controls

109

Privacy button

Notice

OnStar services

The Wi-Fi hotspot functionality is not

available for all markets.

Press and hold j until a message is

heard to activate or deactivate the

transmission of the vehicle location.

General services

If you need any information

Up to seven devices may be

connected.

To connect a mobile device with the

Wi-Fi hotspot:

concerning e.g. opening hours, points

of interest and destinations or if you

need any support e.g. in the case of a

vehicle breakdown, a flat tyre and

empty fuel tank, press Z to establish

a connection to an advisor.

Press j to answer a call or to end a

call to an advisor.

Press j to access the Wi-Fi settings.

1. Press j and then select Wi-Fi

settings on the Info-Display. The

settings displayed include the Wi-

Fi hotspot name (SSID),

Service button

Press Z to establish a connection to

an advisor.

Emergency services

In the case of an emergency situation,

press [ and talk to an advisor. The

advisor then contacts emergency or

assistance service providers and

directs them to your vehicle.

password and connection type.

SOS button

2. Start a Wi-Fi network search on

Press [ to establish a priority

emergency connection to a specially

trained emergency advisor.

your mobile device.

3. Select your vehicle hotspot

(SSID) when listed.

In the case of an accident with

activation of airbags or belt

tensioners, an automatic emergency

call is established. The advisor is

immediately connected to your

vehicle to see whether help is

needed.

Status LED

Green: The system is ready.

Green flashing: The system is on a

call.

Red: A problem arose.

Off: System is in standby mode.

4. When prompted, enter the

password on your mobile device.

Notice

To change the SSID or password,

press Z and talk to an advisor or log

in to your account.

Red / green flashing for a short period

of time: Transmission of the vehicle

location has been deactivated.

To switch off the Wi-Fi hotspot

functionality, press Z to call an

advisor.

Wi-Fi hotspot

The Wi-Fi hotspot of the vehicle

provides internet connectivity with a

maximum speed of 4G/LTE.

110

Instruments and controls

Smartphone app

The following functions are available:

On-demand diagnostics

With the My Vauxhall smartphone

app, some vehicle functions can be

operated remotely.

At any time e.g. if the vehicle displays

a vehicle message, press Z to

contact an advisor and ask to

complete a real-time diagnostic check

to directly determine the issue.

Depending on the results, the advisor

will provide further support.

●

Lock or unlock vehicle.

Provide information on the

vehicle location.

The following functions are available:

●

Honk horn or flash lights.

●

Lock or unlock vehicle.

Honk horn or flash lights.

Check fuel level, engine oil life

and tyre pressure (only with tyre

pressure monitoring system).

Stolen vehicle assistance

If the vehicle is stolen, report the theft

to the authorities and request OnStar

stolen vehicle assistance. Use any

phone to call an advisor. Find the

respective OnStar phone number on

our country-specific website.

Diagnostic report

The vehicle automatically transmits

diagnostic data to OnStar which

sends a monthly email report to you

and your preferred workshop.

●

Send navigation destination to

the vehicle, if equipped with a

built-in navigation system.

OnStar can provide support in

locating and recovering the vehicle.

Theft alert

When the anti-theft alarm system is

triggered, a notification is sent to

OnStar. You are then informed about

this event by text message or email.

Notice

●

Locate vehicle on a map.

Manage Wi-Fi settings.

The workshop notification function

can be disabled in your account.

To operate these functions, download

the app from Apple's App Store or

Google Play Store.

The report contains the status of key

operating systems of the vehicle like

engine, transmission, airbags, ABS,

and other major systems. It also

provides information on possible

maintenance items and tyre pressure

(only with tyre pressure monitoring

system).

Remote control

Restart prevention

If desired, use any phone to call an

advisor, who can remotely operate

specific vehicle functions. Find the

respective OnStar phone number on

our country-specific website.

By sending remote signals, OnStar

can prevent the vehicle from

restarting once it has been turned off.

To look at the information in greater

detail, select the link within the email

and log in to your account.

Instruments and controls

111

Destination download

If the OnStar service is used on

another vehicle, press Z and request

that the account be transferred to the

new vehicle.

Notice

The vehicle location always remains

accessible to OnStar in the case of

an emergency.

A desired destination can be directly

downloaded to the navigation system.

Press Z to call an advisor and

describe the destination or point of

interest.

The advisor can look up any address

or point of interest and directly send

the destination to the built-in

navigation system.

Find the privacy policy in your

account.

Notice

In any case, if the vehicle is disposed

of, sold or otherwise transferred,

immediately inform OnStar about

the changes and terminate the

OnStar service on this vehicle.

Software updates

OnStar may remotely carry out

software updates without further

notice or consent. These updates are

to enhance or maintain safety and

security or the operation of the

vehicle.

Vehicle location

OnStar settings

The vehicle location is transmitted to

OnStar when service is requested or

triggered. A message on the Info-

Display informs about this

transmission.

OnStar PIN

To have full access to all OnStar

services, a four-digit PIN is required.

The PIN has to be personalised when

first talking to an advisor.

These updates may concern privacy

issues. Find the privacy policy in your

account.

To activate or deactivate the

transmission of the vehicle location,

press and hold j until an audio

message is heard.

To change the PIN, press Z to call an

advisor.

Account data

The deactivation is indicated by the

status light flashing red and green for

a short period of time and each time

the vehicle is started.

An OnStar subscriber has an account

where all the data is stored. To

request a change of the account

information, press Z and talk to an

advisor or log in to your account.

Notice

If the transmission of the vehicle

location is deactivated, some

services are no longer available.

Instruments and controls for Your Vauxhall Corsa 4 Door First Generation (2014-2019)

Related Topics

Popular Owner Manuals

Latest Owner Manuals