Get Instruments and controls -> Controls Guide for Vauxhall Corsa 4 Door First Generation (2014-2019)

76

Instruments and controls

Steering wheel controls

Heated steering wheel

Controls

Steering wheel adjustment

Cruise control, Speed limiter,

Activate heating by pressing *.

Activation is indicated by the LED in

the button.

Forward collision alert setting,

Infotainment system and a connected

mobile phone can be operated via the

controls on the steering wheel.

Unlock lever, adjust steering wheel,

then engage lever and ensure it is

fully locked.

Do not adjust steering wheel unless

vehicle is stationary and steering

wheel lock has been released.

Driver assistance systems 3 153.

Further information is available in the

Infotainment manual.

Instruments and controls

77

The highlighted grip areas of the

steering wheel are heated quicker

and to a higher temperature than the

other areas.

Adjustable wiper interval

Windscreen wiper/washer

Windscreen wiper

Heating is operational when the

engine is running and during an

Autostop.

Stop-start system 3 135.

Horn

Wiper lever in position INT.

Turn the adjuster wheel to adjust the

HI : fast

desired wipe interval:

LO : slow

short interval

long interval

: turn adjuster

wheel upwards

: turn adjuster

wheel downwards

INT : interval wiping

or

automatic wiping with rain

sensor

OFF : off

Press j.

For a single wipe when the

windscreen wiper is off, press the

lever down to position 1x.

Do not use if the windscreen is frozen.

Switch off in car washes.

78

Instruments and controls

Automatic wiping with rain sensor

Adjustable sensitivity of the rain

sensor

Keep the sensor free from dust, dirt

and ice.

INT : automatic wiping with rain

sensor

Turn the adjuster wheel to adjust the

sensitivity:

Windscreen washer

The rain sensor detects the amount of

water on the windscreen and

automatically regulates the frequency

of the windscreen wiper.

If the wiper frequency is above

20 seconds, the wiper arm moves

slightly down to the park position.

low sensitivity : turn adjuster

wheel downwards

high sensitivity : turn adjuster

wheel upwards

Instruments and controls

79

Pull lever. Washer fluid is sprayed

onto the windscreen and the wiper

wipes a few times.

Outside temperature

A drop in temperature is indicated

immediately and a rise in temperature

after a time delay. Temperatures

below 3 °C flash on the display.

Washer fluid 3 193

Rear window wiper/washer

Push lever. Washer fluid is sprayed

onto the rear window and the wiper

wipes a few times.

Do not use if the rear window is

frozen.

Switch off in car washes.

Illustration shows Graphic-Info-

Display.

The rear window wiper comes on

automatically when the windscreen

wiper is switched on and reverse gear

is engaged.

Press the rocker switch to activate the

rear window wiper:

upper position : continuous

operation

Activation or deactivation of this

function can be changed in the menu

Settings in the Info-Display.

lower position : intermittent

operation

middle position : off

Washer fluid 3 193

Vehicle personalisation 3 105.

80

Instruments and controls

If outside temperature drops to 3 °C,

a warning message is displayed in the

Driver Information Centre.

Notice

For a detailed description of menu

operation, refer to the Infotainment

manual.

9 Warning

Set time

The road surface may already be

icy even though the display

indicates a few degrees above 0

°C.

Clock

Graphic-Info Display

Illustration shows Colour-Info-

Display.

Press the MENU-TUNE knob to enter

the Set time submenu.

Press CONFIG to open the Settings

menu.

Scroll through the list and select the

menu item Time Date to display the

respective submenu.

Uplevel display

Turn the MENU-TUNE knob to

change the current value of the first

setting.

Press the MENU-TUNE knob to

confirm the set value.

The cursor then switches to the next

value. If all values are set, you are

automatically returned to the next

higher menu level.

Instruments and controls

81

Set date

RDS clock synchronization

The RDS signal of most VHF

transmitters automatically sets the

time. RDS time synchronisation can

take a few minutes. Some

transmitters do not send a correct

time signal. In such cases, it is

recommended to switch off the

automatic time synchronisation.

To switch between the options On

and Off, repeatedly press the

MENU-TUNE knob.

Press the MENU-TUNE knob to enter

the Set date submenu.

Turn the MENU-TUNE knob to

change the current value of the first

setting.

Press the MENU-TUNE knob to

confirm the set value.

The cursor then switches to the next

value. If all values are set, you are

automatically returned to the next

higher menu level.

Notice

Colour-Info Display

Press ; and then select the

Settings screen button.

Select Time & date settings to display

the respective submenu.

For a detailed description of menu

operation, refer to the Infotainment

manual.

Set time format

To select the desired time format, tap

on the screen buttons 12 h or 24 h.

Set time format

Set date format

To switch between the available

options, repeatedly press the

MENU-TUNE knob.

To select the desired date format, tap

on the < and > screen buttons and

choose between the available

options.

Set date format

To switch between the available

options, repeatedly press the

MENU-TUNE knob.

Instruments and controls -> Controls for Your Vauxhall Corsa 4 Door First Generation (2014-2019)

Related Topics

Instruments and controls

Popular Owner Manuals

Latest Owner Manuals