Lighting
77
High beam is switched on automatically
in dark surroundings at a speed above
28 mph. High beam is switched off at
a speed below 20 mph, but high beam
assist remains active.
Automatic Light Control
High Beam
The green control indicator
illuminates continuously when the high
AUTO
AUTO
beam assist is activated, the blue
illuminates when high beam is on.
Deactivation
Depending on version: The system can
be deactivated via the vehicle settings
menu on the cluster.
Vehicle customisation ðpage59
When the automatic light control function
is switched on, the system switches
between daytime running lights and
headlights automatically depending on
the external lighting conditions and
information given by the wiper system.
To activate or deactivate the high beam,
pull the lever two times.
Fault
If the system does not work properly or is
not available, e.g. during the initialisation,
High Beam Assist
The system switches from low beam to
high beam and vice versa to prevent
glaring. Once activated, high beam assist
remains active and switches high beam
on and off depending on surrounding
conditions. The latest setting of the high
beam assist will remain set after the
ignition is switched on again.
illuminates on the cluster.
It is accompanied by a message
indicating that the sensors or the camera
may be covered. Stop the vehicle and
check, if these needs to be cleaned.
Automatic headlight activation
Turn the switch in position: AUTO
During poor lighting conditions the
headlights are switched on.
Additionally, headlights are switched on
if the windscreen wipers have been
activated for several wipes.
If
still illuminates after cleaning the
camera, consult a workshop.
Activation
If
illuminates on the cluster after the
Turn the switch in the position: AUTO
Depending on version: The high beam
assist can be activated via the vehicle
settings menu on the cluster.
engine has been switched off and then
restarted, consult a workshop.